Thank you so much for mentioning where you bought the chain end-tab die cutter! I have been looking for somewhere to buy one of those die cutters for a long time with no luck, even considered contracting it out to a machine shop or buying a mill and making one myself. I contacted Dynamis Jewelry about his probably three years ago and he told me his came from the Ukraine and was no longer available. Placed an order for mine today and I’m super excited, waiting 3-4 weeks for it to arrive from India pales in comparison to how long I’ve been looking for one so thanks again 🙏
I was wondering what my old coworker Cody Dagutis was up to today so I did a Google search which brought me here, to his TH-cam channel. I see you are making the transition from the sales floor to the jewelers bench, seems like a natural progression. This is excellent content, I'm glad to see you moving in this direction, I can't wait to see what you do next. Best of luck - MH
Omgoodness finally one in English that I've found 😆. Better then watching it is Russian or German 😆. Respect there talent but I can't understand the inter workings of what is being done or or things. Thank you for sharing. Absolutely great work 👏👍💯
17:30 when your trying to line it up if you have access to a laser and can tack it together then flow solder for all the joints it will definitely take less finagling.
Maybe you've figured it out since you made this, but to keep it in alignment while soldering, there's something welders use called "tack welds" to hold several pieces together to make sure it's all squared properly before making all the welds. If you just solder in the middle and at the ends, then your entire piece should remain in alignment. You could call it "tack soldering" I suppose.
🤩 I just ran into this video. Thanks for sharing. Been watching change making videos since forever and this is the first time I ran into someone that’s speaking English that’s making this bracelet. I have a question ? when you put the two bracelets together can’t you hold it with crazy glue I’ve seen someone use this technique on silver and then they just burn it off after sold during. ☺️ excellent video. Thanks again for sharing subscribed👏👏👏🌟🌟🌟🌟🌟🌟😁
Братан, концевые и замок карабин не подходят для изделия такого рода. Одно дело когда ты одеваешь цепочку на шею и у тебя обе руки свободны для этого и совсем другое дело когда ты будешь в извращённой позе пытаться застегнуть такой браслет 😊. Сделай хотя бы часовую застёжку и концевики с шарнирами. А если время будет позволять, то замок-коробка на таких браслетах идеально смотрится. Это занимает больше времени и выходит дороже, но клиенты будут довольны!
@@alexeipopovski9833 I got it from stuller. Here is the link www.stuller.com/products/21-0395/?groupId=11580&fromRAC=true&recommendationSource=SiteSearchRAC
Started teaching myself about 2 years ago just consuming as much TH-cam content as possible on it. Just recently began a part time apprenticeship at the store I work at. I wouldn't have been able to do anything if it weren't for other TH-cam creators sharing what they know. Just paying it forward 😁
Super Bänder aus Metall sehen alles sehr schön aus dass ihr berichtet wie ihr gemacht wir könnten ja bald bei der Post welche schicken wenn ich euch meine Adresse❤❤❤❤❤❤
How do you get the wire to rip through the size block like spaghetti? Is there some lube I should be using? Is mine tougher because my block is brand new? Can you actually run through 4 sizes between annealing? Sorry last question; Is your silver some magical secret elastic alloy mix, 925 is partially copper is that what I'm missing?? I'm brand new learning and any help would be sincerely appreciated.
I've started using just regular shop oil. I used to use wax but 3 in 1 shop oil works really well. Do you quench when you anneal or do you let it cool slow?
That's not a complete 100% Ramses!... looking close it's looking good but .. need some more in don't say it in English...pero en castellano, esta hermoso, mis primeros salieron asi..pero buscando mas encontré rl detalle , las cadenas en espejo las debes soldar en diagonal y sin cortar los sobrantes, después sueldas el sobrantes entre si,les das forma con un pequeño yunque redondo y después lo pliegas , rebajas con lima y pules. Asi queda la media luna perfecta de las caras.
I believe your video is the only one on youtube that clearly explains this process by an english speaker. Good Job,
bracelet is sick!!!
Just found you and I’m very glad! Your work is clean, precise, and easy to follow. Thank you!
Thank you so much for mentioning where you bought the chain end-tab die cutter! I have been looking for somewhere to buy one of those die cutters for a long time with no luck, even considered contracting it out to a machine shop or buying a mill and making one myself. I contacted Dynamis Jewelry about his probably three years ago and he told me his came from the Ukraine and was no longer available. Placed an order for mine today and I’m super excited, waiting 3-4 weeks for it to arrive from India pales in comparison to how long I’ve been looking for one so thanks again 🙏
No problem! I had a tough time finding it as well. I posted it on reddit and someone helped me find it. It works really well.
My first time watching your channel... Really, the way you explain makes the work interesting and motivating for learning... Thank you❤️
Absolutely love this and thank you turned out so nice
Awesome video. Thanks for sharing your knowledge 🙏
Enjoyed your video. You explained some things that other videos don't. Bracelet looks great!
That is a really nice bracelet. Great job! I enjoyed your video and it inspired me to make my own Ramses bracelet.
Awesome demonstration and explanation
Thank you for detailed explanation. Amazing video.
Thank you!
This video is awesome. Thank you.
Great tutorial! Thx!
Just came across your videos and love your work, just beautiful!
Thank you so much!
Nice work bro. Thanks for teaching
I was wondering what my old coworker Cody Dagutis was up to today so I did a Google search which brought me here, to his TH-cam channel. I see you are making the transition from the sales floor to the jewelers bench, seems like a natural progression. This is excellent content, I'm glad to see you moving in this direction, I can't wait to see what you do next. Best of luck - MH
Omgoodness finally one in English that I've found 😆. Better then watching it is Russian or German 😆. Respect there talent but I can't understand the inter workings of what is being done or or things. Thank you for sharing. Absolutely great work 👏👍💯
Thanks for your comment! I hope my video was helpful. It took me a while to figure out what those other guys were doing.
@@codydagutis6639 hello sir plzz tell me your acid
@@pritammajumder1155 It's called Jax
@@codydagutis6639 sory jax mens jax acid ??
@@pritammajumder1155 www.riogrande.com/product/JAXSilverBlackener1pt/335291?gclid=Cj0KCQjwmuiTBhDoARIsAPiv6L-rLt6dxYneq-wLc2Amayr_sATjojVY7TXZnPAruJPr8DRkB_pfF5saAnXZEALw_wcB&gclsrc=aw.ds
17:30 when your trying to line it up if you have access to a laser and can tack it together then flow solder for all the joints it will definitely take less finagling.
Good vid man. Leaned much sitting on the train. Thanks.
Glad it was helpful. It was fun trying to figure this out with all of the videos being in a different language haha
This looks like a variation of a foxchain but obviously with a lot more detail and steps.
¡Buen trabajo maestro! Bien explicado como los rusos que he visto como la hacen. Me gustaría ver como haces la modelo питон phyton
Maybe you've figured it out since you made this, but to keep it in alignment while soldering, there's something welders use called "tack welds" to hold several pieces together to make sure it's all squared properly before making all the welds. If you just solder in the middle and at the ends, then your entire piece should remain in alignment. You could call it "tack soldering" I suppose.
I plan on trying that next time I make one. I didn't have regular access to a welder when I made this. Now I do
May I ask what the tool is you’re using for your silversolder wire? Been looking everywhere for it haha!
🤩 I just ran into this video. Thanks for sharing. Been watching change making videos since forever and this is the first time I ran into someone that’s speaking English that’s making this bracelet. I have a question ? when you put the two bracelets together can’t you hold it with crazy glue I’ve seen someone use this technique on silver and then they just burn it off after sold during. ☺️ excellent video. Thanks again for sharing subscribed👏👏👏🌟🌟🌟🌟🌟🌟😁
представляю какой он красивой
Hello sir,
i am a jewalary maker. So which liquit silver back .plzz tell me. And your all vedieos are amezing .thank you 😍😍😍😍
Братан, концевые и замок карабин не подходят для изделия такого рода. Одно дело когда ты одеваешь цепочку на шею и у тебя обе руки свободны для этого и совсем другое дело когда ты будешь в извращённой позе пытаться застегнуть такой браслет 😊. Сделай хотя бы часовую застёжку и концевики с шарнирами. А если время будет позволять, то замок-коробка на таких браслетах идеально смотрится. Это занимает больше времени и выходит дороже, но клиенты будут довольны!
I want to I just haven't been able to make a nice clasp. I'm still learning a bit
Thank you for video! Can you tell, what's that pink material fixing chain for polishing?
If it's what I'm using to hold it down while I file and send that is a wax casting sprue. Didn't have anything else to use. It worked pretty well 🙂
@@codydagutis6639 Yes, but what is it? How called? Where to find? Thank you.
@@alexeipopovski9833 I got it from stuller. Here is the link www.stuller.com/products/21-0395/?groupId=11580&fromRAC=true&recommendationSource=SiteSearchRAC
Thank you for everything your doing playa!! How many years do you have doing jewelry?
Started teaching myself about 2 years ago just consuming as much TH-cam content as possible on it. Just recently began a part time apprenticeship at the store I work at. I wouldn't have been able to do anything if it weren't for other TH-cam creators sharing what they know. Just paying it forward 😁
@@codydagutis6639 I been going a year and learning same way thank you boss!
Top 👏👏👏👏🇧🇷🇧🇷🇧🇷💪
Super Bänder aus Metall sehen alles sehr schön aus dass ihr berichtet wie ihr gemacht wir könnten ja bald bei der Post welche schicken wenn ich euch meine Adresse❤❤❤❤❤❤
Nice work.
Can u please write down the chemical name that blackened the silver.
It's called Jax. It works on yellow gold as well
Бро!
Припой проволоку делай потоньше чтобы легче было паять
I'll try that next time 👍
thanks for the video, i enjoyed your explanation easy to follow ..But the music is totally overbearing, please sort the music to be softer. thanks
Video editing is not my strong suit haha. Still learning the ins and outs
Do you file both sides of each bracelet before you attach them?
Yup! Technically you don't need to but it helps make a nice even finished product I think.
That’s amazing work , are you self taught?
For the most part yes
How do you get the wire to rip through the size block like spaghetti? Is there some lube I should be using? Is mine tougher because my block is brand new? Can you actually run through 4 sizes between annealing? Sorry last question; Is your silver some magical secret elastic alloy mix, 925 is partially copper is that what I'm missing?? I'm brand new learning and any help would be sincerely appreciated.
I've started using just regular shop oil. I used to use wax but 3 in 1 shop oil works really well. Do you quench when you anneal or do you let it cool slow?
@@codydagutis6639 I've learned to let it cool slightly before quenching is that right?
Rip through like spaghetti👍😆😆😆🤣🤣😆🤣😂😂🤣🤣🤣😂😂👏👏👏 excellent question😆😆😆😆😆
@@chrisgregory670No. Silver needs a full quench. It does not air quench well.
Hello sir , aap log 925 sterling silver mey7.5 % kya mila te ho. Zink ,coper ya kdm 😍😍😍😍🥰🥰🥰🥰
That's not a complete 100% Ramses!... looking close it's looking good but .. need some more in don't say it in English...pero en castellano, esta hermoso, mis primeros salieron asi..pero buscando mas encontré rl detalle , las cadenas en espejo las debes soldar en diagonal y sin cortar los sobrantes, después sueldas el sobrantes entre si,les das forma con un pequeño yunque redondo y después lo pliegas , rebajas con lima y pules. Asi queda la media luna perfecta de las caras.
Добре чоловік все показав. Але зроби щось з музикою. Не чути, що ти кажеш, а потім музика як заграє, аж вуха ріже
Sorry about that. Still learning how to edit well. Not really my forte