Hey sir! Hope you are doing well and fine sir!😊 So my question is, is there any harm in driving these morel hybrid 2 way components in active with a 4 channel amp that has a rms rating 170w rms at 4 ohms in reliability wise and sound quality wise? As the tweeter is rated at 130w rms at 6 ohms and mid bass rated at 140w rms at 4 ohms, won't it be overpowering the mid bass and just less powering the tweeters? Also please can you suggest best match amplifiers and dsp or dsp.amps for two sets of morel hybrid 3 way active and one morel ultimo titanium sc sub 12 inch 2 ohms? Thank you sir!😊
@@aryadevsinhsolanki5687 the tweeters are receiving power from the mosconi pro 410, and at almost 5.8 ohms, instead of 80watts RMS, they're probably seeing 55-65 watts. As far as the mids, the level can be turned down to not hurt their 140 watts RMS rating. ( It's always easier to turn down, too much power, than to not have enough:)- any amplifier brand that has a 100 DB SNR rating, and less than 0.01 thd, in my opinion. Arc, helix, mosconi, or audison for DSP, imo. Thanks for watching, and hope this helps:-)
I actually had the MW6-MKII before going with the MW9, and I was thoroughly impressed!! I almost want to say if Morel made an MW9-MKII, I'd take it over the Elate MW9...maybe. I think the MW9 is magical, but that MW6-MKII is something special!
Morel is very expensive ,unfortunaly for me cant eard them, i have a mix rebec cs80 midrange , 2way steg me 650CII , amplifier pheonix gold zq 5004 and steg k4 0.1 , jbl gx604 for front sub gladen rs x 08 slim and k4 0.1 for back sub emphaser s4+ and midbass steg , pheonix gold for tweeter and midrange
Sir, personally what difference you felt in elate carbons and hybrid? If i ask you the sound signature of elate and hybrid how both of them are they? My sound taste is accurate bass, not overpowering one, clean mids and high without that ear pinching sharpness, a combination of sweetness and a bit loudness. So which one would you recommend out of these two speakers? Hybrids or elate carbons sir?
@@aryadevsinhsolanki5687 if you can deliver 150 watts,or more, RMS then elates, otherwise I say hybrids are they are more efficient at lower power- hope this helps
@@christiandshatto7765 Great! Your answers really helped me a lot with my overall knowledge plus led to decide which model to put sir. Thank you very much sir! Have a wonderful day! Take care sir!
I like them both!!!! Sometimes I want softer, so it would be morel, sometimes I want harsher& lots of output , then I'll put the focals back in. Sound is very subjective and different to each individual, so it's a really difficult question to answer- that's why I just do this to test for myself I'll probably never keep a particular set of components in my car indefinitely. I usually change them out every 3 to 6 months
@@MrLs1racer I'm running the mosconi pro 430, active to the tweeters and the mids. ( Rated 170 watts rms @4 ohms. The tweeters are almost 6ohm, so they're naturally getting less power than the mids, and they're crossed over 2500hz, LKR, 24db/octave
That power will be just fine. The hybrid drivers are extremely efficient at 91db. When I got my new car three years ago, I ran the hybrids off the stock 15-20watts for a few weeks till I could get all my amps in.
I thought I had mentioned that the amps were just thrown in for testing( usually they're in the spare wheel well area, plus I left the rs door panel off intentionally. You can check it out on 12volt clean wire club on fb., or my other video labeled mosconi aero 8)12 direct dsp) thanks for watching👍🏼
So far, and I've used everything, except helix/brax, one of the best. It gives you the ability to control so many different factors. Which is why I believe it should be considered 'flag ship'. I was fortunate enough to try the new audison SW and I really liked that one too. In the future I will demo arc, and helix. The key to dsp, in my opinion, is spending time using it to learn it. Save your settings that you like, then try different settings/features so you understand/hear the difference(s). And, if you don't like it, reload previous saved settings, or start over. Changing speakers, amps, etc., can cause your tune to change, need adjustment too.
@@christiandshatto7765 yes exactly , you need good dsp for full parametric tuning but also good installation, even with highest gears if the install dont follow that nothing but at least the tuning should be crazy , that not every one can tune a car to perfection, i think my last step going to be that
Hey sir! Hope you are doing well and fine sir!😊
So my question is, is there any harm in driving these morel hybrid 2 way components in active with a 4 channel amp that has a rms rating 170w rms at 4 ohms in reliability wise and sound quality wise? As the tweeter is rated at 130w rms at 6 ohms and mid bass rated at 140w rms at 4 ohms, won't it be overpowering the mid bass and just less powering the tweeters?
Also please can you suggest best match amplifiers and dsp or dsp.amps for two sets of morel hybrid 3 way active and one morel ultimo titanium sc sub 12 inch 2 ohms?
Thank you sir!😊
@@aryadevsinhsolanki5687 the tweeters are receiving power from the mosconi pro 410, and at almost 5.8 ohms, instead of 80watts RMS, they're probably seeing 55-65 watts. As far as the mids, the level can be turned down to not hurt their 140 watts RMS rating. ( It's always easier to turn down, too much power, than to not have enough:)- any amplifier brand that has a 100 DB SNR rating, and less than 0.01 thd, in my opinion. Arc, helix, mosconi, or audison for DSP, imo. Thanks for watching, and hope this helps:-)
@@christiandshatto7765 alright sir! So it's okay if the amp rms is slightly higher(20-30rms more than speaker rms)?
I actually had the MW6-MKII before going with the MW9, and I was thoroughly impressed!! I almost want to say if Morel made an MW9-MKII, I'd take it over the Elate MW9...maybe. I think the MW9 is magical, but that MW6-MKII is something special!
Morel is very expensive ,unfortunaly for me cant eard them, i have a mix rebec cs80 midrange , 2way steg me 650CII , amplifier pheonix gold zq 5004 and steg k4 0.1 , jbl gx604 for front sub gladen rs x 08 slim and k4 0.1 for back sub emphaser s4+ and midbass steg , pheonix gold for tweeter and midrange
Sir, personally what difference you felt in elate carbons and hybrid? If i ask you the sound signature of elate and hybrid how both of them are they? My sound taste is accurate bass, not overpowering one, clean mids and high without that ear pinching sharpness, a combination of sweetness and a bit loudness. So which one would you recommend out of these two speakers? Hybrids or elate carbons sir?
@@aryadevsinhsolanki5687 if you can deliver 150 watts,or more, RMS then elates, otherwise I say hybrids are they are more efficient at lower power- hope this helps
@@christiandshatto7765 okay sir! But if regarding power is not a issue, then you would suggest elates to sound better than hybrids sir?
@aryadevsinhsolanki5687 I like the elates, but personally prefer the hybrids. Most people prefer the elates. Sound is subjective to each individual
@@christiandshatto7765 Great! Your answers really helped me a lot with my overall knowledge plus led to decide which model to put sir.
Thank you very much sir!
Have a wonderful day!
Take care sir!
Which component is best morel hybrid or focal k2 power
I like them both!!!! Sometimes I want softer, so it would be morel, sometimes I want harsher& lots of output , then I'll put the focals back in. Sound is very subjective and different to each individual, so it's a really difficult question to answer- that's why I just do this to test for myself I'll probably never keep a particular set of components in my car indefinitely. I usually change them out every 3 to 6 months
im thinking about installing the same set in my car. how much power do you have going to the 6.5?
@@MrLs1racer I'm running the mosconi pro 430, active to the tweeters and the mids. ( Rated 170 watts rms @4 ohms. The tweeters are almost 6ohm, so they're naturally getting less power than the mids, and they're crossed over 2500hz, LKR, 24db/octave
I would love a pro 5/30 to run my whole system with. How do you think these would do with 70x4 in the mean time. I have a helix dsp and a sony xm-gs4.
That power will be just fine. The hybrid drivers are extremely efficient at 91db. When I got my new car three years ago, I ran the hybrids off the stock 15-20watts for a few weeks till I could get all my amps in.
Why did you from carbon elate to hybrids?
@@Jluong538 I prefer the sound of the hybrids over the carbons.
Nice equipment but need to do a better job on wire management.
I thought I had mentioned that the amps were just thrown in for testing( usually they're in the spare wheel well area, plus I left the rs door panel off intentionally. You can check it out on 12volt clean wire club on fb., or my other video labeled mosconi aero 8)12 direct dsp) thanks for watching👍🏼
@@christiandshatto7765 how is the aero dsp in sound quality ?
So far, and I've used everything, except helix/brax, one of the best. It gives you the ability to control so many different factors. Which is why I believe it should be considered 'flag ship'. I was fortunate enough to try the new audison SW and I really liked that one too. In the future I will demo arc, and helix. The key to dsp, in my opinion, is spending time using it to learn it. Save your settings that you like, then try different settings/features so you understand/hear the difference(s). And, if you don't like it, reload previous saved settings, or start over. Changing speakers, amps, etc., can cause your tune to change, need adjustment too.
@@christiandshatto7765 yes exactly , you need good dsp for full parametric tuning but also good installation, even with highest gears if the install dont follow that nothing but at least the tuning should be crazy , that not every one can tune a car to perfection, i think my last step going to be that
I look to change my DSP is the pheonix gold 8.8 that not a full parametric EQ and maybe i can have better sound with other Dac inside the dsp