AUTOCAD 3D HOUSE PART3 | MAKE A 3D WINDOW
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2025
- MAKE A 3D WINDOW - In this tutorial I have demonstrated steps involved in making a 3D window .
#autocad #autocadtutorial #tutorial #cadcam #3dwall #3dwalkthrough #3dmodeling #3ddrawing #3dhousedesign #sabeercad #3dwindow
CLICK ON THE LINK BELOW TO GET THE COMPLETE SET OF TUTORIALS
sabeercad.teach...
Hit the like button of this video if you liked it .... :)
You can also follow me on my facebook page by liking this page
autocadtutorials4all
Also join my facebook user group "Autocad users"
![[Урок AutoCAD 3D] Создание крыши в Автокад.](http://i.ytimg.com/vi/fiejLrQROm0/mqdefault.jpg)
Your vast experience reflects in your teaching !
I would be disrespectful if I don't applause your videos .
10:46 Before dividing the vertical line you need to extend it 1.5cm in both directions to make all the horizontal frame members spaced correctly. The same way you extended the horizontal divide line 3cm in both directions at 3:35
Thank you for the videos, they're fantastic and I have learnt a lot!
Learned Many Things after seeing the videos... I realized that i learned nothing from the cad institute i used to go...almost many commands are new to me...You are really great....Hats off Sir...!!
Please upload more videos on 3DS max also...I am a Civil Engineer ...Completed my M.tech(Structures)...Also I own a Consultancy...So these things may be very useful to me...Thank u So Much Sabeer ji...
Thanks for sharing these amazing tools!!! Keep it up the good work
You are most welcome 😊
You are a life saver. You should know that.🙏
Thank God !
Thanks Arun for your valuable feed back . Happy to know that you liked my tutorials . I am planing to upload more 3DSMAX related videos in future . Regards and Best wishes ....
complete tutorial.... thumbs up
+Frengky Waresman Thank you :) Please Visit and Enroll at htt://sabeercad.teachable.com for 3D visualization . All the best ... :)
Assalamualikum Sir.
Your lesson is vary usefully and vary good your explanation. Thanks sir.
W/salam. You are most welcome 👍😊
hope i can be like you, Sir Sabeercad... you're one of the best!
great work never seen before such a easy toturial......
Bravo... it´s always good to see good teachers at work....
lalamimix Thanks ...
I was searching for this type of 3D lessons. Thanks a lot.
You are welcome ....
Very good and easy tutorial step by step easy learning process
Well explanation and more information
Thanks Mohammed sabeer , Clear explanations to understand
Thanks, Khalid for your interest in my channel. Make the best use of it.All the best.....
great video thanks from Jamaica in the carribean
Very good step by step and technical explanation. Thank you for sharing.
very prof. lessons, thanks for eveythihgs.
i love all your video man you teach me more than my adviser
VOCÊ É UM EXCELENTE PROFESSOR EM 3D NO AUTOCAD
Thanks... :)
Sabeer nevermind answering my question Ive found out the solution that I cant UNION them without SUBSTRACTing first it works for me right now thanks a lot.
You are welcome
Nice Explanation. I am very much interested to learn full course.
Very useful video. now I know how those used command works. Thank you and keep up the good work.
THESE ARE VERY HELPFUL SIR.
Thank you . You may visit sabeercad.teachable.com to complete set of videos .
+sabeercad okay., will go now
this kind of works helps me a lot to pursue my ambition.
Sir You all the best >> very good tutorial >> I like it very much !!
Very useful video. Thanks a lot. I am learning 3d now
All the best ....
thank you very much sir, for your effort to share all your knowledge to to this kind of technique, that we are not able to go to formal school.
inspiring works from the mentor
cesar giucado thanks :)
Very useful to learn 3d models.can u release any C.D about CAD 3D tutorials.
Giridhar Chinnam I have not created any CD as of now . In future when I come out with one I will let you know ...
thanks, your videos are very helpful but I want to know every time I try to make extrude with negative value then I press enter it makes it in positive
zabardast sabeer bro
Thanks...
sir very good heip full tutorial
hi ! i learn a lot from you tutorial videos thank so much sir !
Fernando Jr Pascual You are most welcome ....
sabeercad as wr wb
Hi have u got any beginners 3d tutorials or any chance u can make some?
Hi Sir, Thank you for your supportive and useful videos, i have learnt a lot, i really appreciate your hard working. Thanks again keep it up.
+Kamran Mirzakhel You are most welcome
thank you so much sir..... may allah bless u
Thank you 😍👍 May Allah Bless you too..
Thank you very much for giving us this opportunity to learn easily, but i m just wondering can we copy the windows or we have to build them each time separately! thank u in advance!
Thanks for your interest in my channel. Once you a make a window it can be used any number of times in your future works. To know more please refer the video "Best method to handle with repeatability in a drawing" under Tips and Tricks section in my channel. All the best....
sabeercad
sure! much appreciated!
sabeercad very nice sir..
3D Windows designs are nice and beautiful
Thanks Mohammed for such a wonderful teaching video, can you make one going deeper in the material browser section on how to make the wood looks like real in detail? Thanks in advance!
Thanks for your comment . I will upload a video on materials in future...
thanks sir. this will help a lot
You are welcome :)
Bonjour Monsieur, je suis Français. Merci pour votre tutoriel sur "make a 3D window"
Je l'ai fait, et maintenant j'utilise cette fenêtre en "Bloc" pour tous mes dessins.
Again, another fab tutorial, thank you so much for sharing!
Holly Emptage You are most welcome
Thank you sir for your tutorial ...its so useful and you are doing a great and wonderful job...☺..... Its very very useful...Congratz and All the best💐💐💐
this software is very nessesery , but very dificalt , thank you
Lucy Art and Design Harutyunyan If learn systematically with patience , you can master it . All the best
Thank u very much sir. I learned alot of thing please continue !!!
You are welcome :)
So Useful, Thanks alot!
Very good
And GREAT video tutorials by the way, brief and concise very inspirational thanks for posting this tutorials...
Thanks for your comment
hello sir ,thanx for this videos it help a lot
You are most welcome
hey man, just wanted to say thanks.
You are most welcome....
Bro is it safe to download from get into pc
Wow, you are doing such a marvellous job. I just love the clarity.
Thank you so much
You are welcome :)
Nice Explanation i like it...
+Safdar Hussain Soomro Thanks for your feedbak ☺
not at all my pleasure..
thanks sir i learned lot of things of your tutorial.thanks sir
Good morning Sabeer,
Last time I asked you about the sliding windows, and you said that you would soon have a tutorial for that. I believe it's not ready yet.
My today question is different. You teach us to do a sloped roof, which is very good. However what about flat roofs and different levels of roofs (because you might have a roof higher than the other)
Regards
We can easily create a flat roof. Just trace the wall boundary using a polyline , offset that line 10-15 cm outside , extrude it through 10 cm to create the roof slab . To make the parappet you can use the same procedure which you have used to create the wall . thats all . For roofs having level diffrences you can stick to the same procedure . Roofs will be at different levels since the height of the walls are different . I will try to post a video on this as well.
Building design can also be done like this with the video game Sims 2. Custom content can be added to the game to build almost anything. A high end gaming rig with a solid state HD, a fast processor and lots of ram is needed to run a lot of custom content.
THSNK YOU FOR THE VIDEO
i'm from Egypt and i could understand u simply thank you ... and if u can i need to make my own blocks to use it because i couldn't find 3d cad blocks
sir you are the greate
sir i using autocad 2015 , this tutorial your using window option ( check video last chapter )
how can i used window option i using 2015 software
thank you very much for these videos! I am up to video 6, and I am using autocad 2012.
Make the best use of all lessons . All the best ...
i am using auto 2013..... the most difficult part is MEP works.. as i am an engineer i know it... any tutorial useful like this for MEP works
very educational ,i learned a lot
+Christoff Fraser You are most welcome :)
thank very much sir ,it really help me alot, especially the short cut key commands , God bless
+mrey Thanks for your interest and comment
Sir, is making a 3d design of the plumbing plan still covered? I was wondering if you could show how to do it. I'm having a really hard time making it. In fact I really don't know how to do it.
Grace Devon Gevero In future I will try to upload such a tutorial...
Hello Sabeer - I have learned so much from your videos and say thank you. Did have a question - obviously it is time consuming to create 3D doors and windows for each cutout - is it possible to copy and paste door and window patterns into "like size" cutouts elsewhere in the 3D walls. Also, do you available for download the doors and windows you created in your basic autocad 3d house tutorials.
Thanks again.
In Autocad we need to create different types of doors , windows , furnitures etc. only once . Then it can be reused any number of times in all your future drawings using the concept of blocks. Please refer my video on blocks in my channel ( comes under HOT TOPICS playlist) . You can download project files required to try each tutorial from the video description page of each video.
Hi Sabeer,
Thus far I have been able to effectively and efficiently create 3D walls and also windows and doors and sloped roofs per your tutorials ( I can now create 3 or 4 panel windows in less than 10 minutes. ) all in only having AutoCad for less than 5 days.
I have one last question and I will not trouble you again. I am aspiring to be a solar engineer and wish to be able to draw solar arrays on a 3D roof - thus far when I attempt to create a rectangle on a 3D sloped roof (to accommodate a solar array) it does not appear realistic as the polyline aligns to the slope of the roof as opposed to the horizontal plane of the ground. I am thinking I need to start with a flat roof and create the appropriate extrusions (for the arrays) and then create the sloped 3D roof. Am I on the right path?
Again thank you for your replies - if you ever find yourself in Colorado I would be happy to take you out to dinner as I have learned much very quickly from your tutorials.
-Rick
Richard Faber Hi Richard , I am happy that you have acquired practical knowledge from my channel . Please go ahead explore more videos .
Regarding your work , the panels created using the polylines will align properly on the roof plane if the UCS is aligned . I will go through the file suggest the proper solution if you can send me the drawing file .
I am sorry to tell you that there is no chance for me to come to Colorado . If you genuinely feel that my lessons have made a change in your level of understanding of AutoCAD , you can make a contribution to 'sabeercad' in the paypal id sabeercad@gmail.com .
All the best and regards .....
sabeercad Hi Sabeer - with your help I have been able to create a good scale model of my house with realistic windows, doors and a very complex multi angled / gabled roof (that took some time). The one thing that has got me stumped is how to move or delete the cutouts that were created in part one of your tutorials - whenever I try to move or delete them the entire wall gets deleted as well (obviously not a good situation). Is there a way to isolate and/or move delete cutouts from a 3D wall. Thank you again for all your help
it was so useful
is this Sabeer from Ernakulam ?
I'm really impressed with the videos, learned al lot, thanks very much. Keepup such good works
You are most Welcome .
while i am trying to draw a polyline for a window frame when i put a curser over a point it wont pick up the point
it only allows me to draw on one plane
I have learn a lot from your videos. These are great videos.. great job. I wanna download your video lessons. Would it possible.?.. please give me any info regarding the video. If O ave to pay then I would.! Thanks. Waiting for your answer!.
okay, so far, so good, i'm keeping up with your tutorial as well, but i think i'm going to have a problem because i don't have any background on 3d studio max and adobe photoshop...i'll try to download these softwares tonight...thanks a lot sir!...
Greecia Yujin Gray Its not necessary that you should have a background in those software . Just follow the procedure step by step . You will get the result . All the best .....
Thank you so much for the tutorials - they are great! At that moment I'm in the middle of placing the windows of my tutorial house, but I have a huge problem. I can't offset polylines and there are elements that don't look like it's planned to be. It's turning that message: "Cannot offset that object." I'll be very happy if you know the solution of my problem and you tell me what is it. :)
Thanks for your comment . The offset problem could be because there can be coincident objects . just activate object cycling . If you need any clarification on that please refer my video on that in Tips and tricks section in my channel . Another method to tackle with this problem is , just erase the objects that prevents you from offsetting another object . Then perform offset and give "oops" command to restore the erased object back . Try these things and get back to me
sabeercad I've tried the two different methods you told me but none of them worked. I think the problem is somewhere else and it's not related with the objects on back or front side. I'll research more and if I have a solution will write again. :) Thanks!
Teodora Yordanova Another reason could be UCS . Your UCS should be in the same plain as that of the object (it should be the same as of creating the object) . If this fails . Send me the file . I like to sort out such situations . Even I can learn more.. :)
sir what is the difference of the commnd presspull and extrude
When you do it on a single profile it is the same . But if it done between profile press pull = extrude + subtract
thank u so much for teaching in outocad subeercad i have OUTOCAD 2007 please i need to activate isometric circle because before i starting 3D wall i need move south direction please help me in that question?
hi i need help to create a skylight windows on my 3d roof plan but subtract doesn't seem to work how can i create one? thanks.
You are most welcome
nice tutorial sir, but i have some problem with performing Divided command, when i used these command and so klik the object then entering 3 for the segment of blocks n enter, its not work i did not get 2 point at the poly line to making 2 center frame like in the video please give me a solution for this thanks
Sir please tell me what the thickness of wall are you choose?
Wall thickness is 24 Centimeters and the hight is 300 Centimeters
hello sir,
i want to clear my concept on stairs so plz can u tell me about how to make stair(straight, doglegged, bifurcated, spiral,circular).
and their working drawing and section and elevation part. plz sir.....
+Madhvi Sharma I have plans to upload a tutorial on making 3d stairs
sir please tech me how to work on, 3d window when i work for subtract it is not working as i used all instruction, is there any problem as this point?
Mr Sabeer, how can i reset my autocad civil 3d when union command does not function well? and i cannot select multiobjects
Bonjour,
je me suis servi de vos fenêtres dans tous les dessins de mes maisons !
et j'ai rajouté des TEXTURES TRANSPARENTES POUR LES VITRES.
MERCI.
very helpful
Good . Appreciate your interest.
When I am drawing poliline I cant pick up the next point why.??? Plz reply
Turn off the Dynamic UCS and try. The UCS should be exactly on that face when you try this.
Thank you you have aided me well.
+Eniola Davis You are welcome
very much helpful
+Talat Raja All the best
How can I watch all ur tutorial video sabeer Bhai
Using my channel. whatever I create I upload ...
I subscribe your channel n I like it so much n I am excited to watch all n follow I want to learn as a bigginer I wanna say you a big thanks for helping us
You are most welcome :)
mohammed azam You can visit my channel th-cam.com/users/sabeercad or web site www.sabeercad.com
Sir where can i find the Part 1 and Part 2 of this video? It very helpful to us. Thanks.
+zany caguioa please visit and Subscribe to th-cam.com/users/sabeercad for part1 and part2 . Also visit and Enroll at sabeercad.teachable.com to get all videos of this course
hi my problem is when im about to join the first line or divider in the window this shows.""1 was not parallel to ucs"how can i fix this simple problem?
hello, sorry for my question, but i don't understand why you have extended the pline before you divide in 3 parts.
thanks!
Is it possible to stretch the frame of 8'x4' with thickness 6" (3d object) into 4'x4' thk6".
Yes you can . Just use move face option in the solid editing panel and move individual faces .
thank you so much. you are sharing knowledge. god bless you.
There is no wealth like knowledge,
and no poverty like ignorance.
You are most welcome :)
thank you much... how can i see the 2d drawing of that project?
how to make coordinate any place ,any where place only you give me method please
How can I offset polyline? Thanks.
Sir I have a doubt plz help me...
# when you move the mouse on an object or a line that object or line is highlighted bt in my software that are not highlighted...plz are you tell me...? How that are highlighted..plz sir
Right click the mouse , Click on OPTIONS , Click on SELECTION , Activate all the Selection Preview Options in the PREVIEW Area
Very good,, helpful tutorial,
but you forget to say one thing in the beginning, (To change the UCS)
HOW DO U OFFSET THAT POLYLINEEE IN 3D ?
Bring the UCS to the plane of the polyline when it was drawn , then try OFFSET command .
how can i make a 3d sloped window?
Sir how can I insert downloaded window images to this plan
Autocad is not meant for such applications. You can use PhotoShop for that.
thanks bro
Thanks .Recommend my channel to your friends and tell them to Subscribe to it
bahut bahut sukriya sir
You are welcome
sabeercad hello sir pls give me your no. I want to learn from you pls rply