I shop on Aliexpress all the time and have seen these but I never really understood what they were for. Thanks to your excellent video instructions I just ordered a couple. To say this is a "must have item" is an understatement. I can't hardly wait to get one and use it. No more measuring and matching up mated pairs. Thank you Sir for sharing, this is some great information.If not for your video I probably would have never bought one. Cutting bands has always been one of my least favorite things to do but that is sure to change soon.
Hey brother I have just started making my own bands. I got some .62mm orange bands from gzk with my hammer pro. I would like to shoot 8mm ammo. What would you suggest as a starting taper?
Could you please tell me for what kind of knifes is it? My OLFA 45 mm is not able to cut bands. The edge of the ruler doesn't let the knife to reach the band.
First you need to cut one small piece taper 3mm to 0mm to begin and than to use ruler like you did. If you don't do that you will have your bands tapered 6 mm from one side instead of 3mm taper from both sides.
Now available from Amazon in the USA and in he UK.Current Amazon USA link: www.amazon.com/GM-BW-Slingshot-Replacement-Competition/dp/B07DV8KG5Z/ref=cm_wl_huc_itemI think sold out for now in the UK but they will have them again.No I am NOT the seller and have no affiliation with the seller.If you are in the USA and want it FAST get one while you can. I expect a fast sellout.
sorry Falscher Link www.aliexpress.com/item/Slingshot-1pcs-auxiliary-Cutting-flat-rubber-band-universal-ruler-Catapult-Accessories-Outdoors-Slingshot-New-hunting-tools/32846664635.html?spm=a2g0s.9042311.0.0.Ip5FBu
Great product thanks for the video, I ordered and received same. Can you please tell me what rotary cutter you use! I find the olfa 45mm cutting depth doesn't give enough clearance when using the ruler jig Regards Richard
A cheaper .... What's up ... turn the screws over ;-) So, turn the screw out and put it in the other way. ;-) If necessary, here's something round the round cover abschleifen .... but then actually. Greetings from Germany
I shop on Aliexpress all the time and have seen these but I never really understood what they were for. Thanks to your excellent video instructions I just ordered a couple. To say this is a "must have item" is an understatement. I can't hardly wait to get one and use it. No more measuring and matching up mated pairs. Thank you Sir for sharing, this is some great information.If not for your video I probably would have never bought one. Cutting bands has always been one of my least favorite things to do but that is sure to change soon.
Y como se llama ese aparato para cortar liga plana?
Thank you for showing me because i just bought one.
Complete explanation , executed perfect example
An Great review. 👍
Now I know what I'm going to get. Thank you
Roller cutter 60mm right?
Is it still accurate if you double up on material?
I’ve not tried doubling to be honest
Wouldn't that 1st band have a straight edge
Exactly what I was wondering
Yes, and can just be cut again to remedy it.
I bought mine on Amazon for $8.99
Works perfectly, just cut once and flip it end for end. That's it 👍
What do you think about using a set of calipers to accurately adjust the ruler at each end point?
Saw this video and just bought one !
Your new subscriber 👍
Nice video. I just got into catapults
On a fresh piece of rubber with a straight edge is there a way to taper the edge properly?
Yeah just taper to half of what your band raper is, so say if your taper is a 6mm drop then cut the edge of at a degree of 3mm
Hey brother I have just started making my own bands. I got some .62mm orange bands from gzk with my hammer pro. I would like to shoot 8mm ammo. What would you suggest as a starting taper?
ATO try an 18/12mm
@@romanycustomcatapults it's in the works brother. Thanks for the reply. 🇨🇦🥓🍻
Got mine from ebay today. Very handy bit of kit.
Hello, what is the name of this cutting ruler?
Do you flip your elastic around each time you cut?
Model ?? Ordering info please?
I suggest you have a 60mm rotary cutter. Anything smaller you will not be able to cut anything with that large edge on the ruler.
Yup just had a cut a bit of my olfa 45mm central bolt thing.
i paged through their site under rulers and rotory fabric accessories. cant find that tool. whats it actually called?
If i loosen the nuts up enough for the clear part to slide easily, the bolts fall out or can get lost.
Could you please tell me for what kind of knifes is it? My OLFA 45 mm is not able to cut bands. The edge of the ruler doesn't let the knife to reach the band.
I was looking at this on Ali but was put off by the sketchy video. Looks just the job though. Good video 🖒✌
(Phip 😀)
I just ordered this from GZK!
what are the dimensions for butterfly shooting and tape thickness thank you friend
First you need to cut one small piece taper 3mm to 0mm to begin and than to use ruler like you did.
If you don't do that you will have your bands tapered 6 mm from one side instead of 3mm taper from both sides.
michkanm that makes no difference to how bands perform
@@romanycustomcatapults hello, I wants to get one ruler like this. However, wouldn't that 1st band have a straight edge?
@@aannddyychang6162 it would yes, but in my experience it makes no difference to accuracy, if it bothers you though it’s easily remedied
It maybe the perfect tool for others, but I get anxiety it having to adjust it yourself
Hi, what's the diameter of your rotary blade, 45 or 60mm ? Thanks.
abc123 60mm but I have a 40mm aswel, I prefer 60mm though
@@romanycustomcatapults I'll buy a 60mm then, thank you. ;)
Now available from Amazon in the USA and in he UK.Current Amazon USA link: www.amazon.com/GM-BW-Slingshot-Replacement-Competition/dp/B07DV8KG5Z/ref=cm_wl_huc_itemI think sold out for now in the UK but they will have them again.No I am NOT the seller and have no affiliation with the seller.If you are in the USA and want it FAST get one while you can. I expect a fast sellout.
Believe I’ll have a go with one. 👍
If you lay 2 sheets of band down and cut both bands at the same time you will have perfect matching pair of bands
I know
Nice bit of kit hmmm.
Wish I new where to buy one.
sorry Falscher Link
www.aliexpress.com/item/Slingshot-1pcs-auxiliary-Cutting-flat-rubber-band-universal-ruler-Catapult-Accessories-Outdoors-Slingshot-New-hunting-tools/32846664635.html?spm=a2g0s.9042311.0.0.Ip5FBu
Great product thanks for the video, I ordered and received same.
Can you please tell me what rotary cutter you use!
I find the olfa 45mm cutting depth doesn't give enough clearance when using the ruler jig
Regards
Richard
A cheaper ....
What's up ... turn the screws over ;-)
So, turn the screw out and put it in the other way. ;-)
If necessary, here's something round the round cover abschleifen .... but then actually.
Greetings from Germany
Monkey can use it. Great for some of the lads in catapult community. lol
self made
Grüße aus Germany
th-cam.com/video/tRkCAP4xzAY/w-d-xo.html
;-)
You rabbit on and make no sense.
Thank you for the feed back, it’s appreciated, merry Christmas and have a great new year mr p