Thanks for showing. I also have these cutting rulers. But in the meantime I prefer to use templates. I still use the rulers for experiments with tape sizes.
@@cres213from what I gather you get the difference from 24-18 which is a difference of 6 basically 24 minus 18. Then you would taper the first cut to 6 and then half of that which is 3 so I believe it would be 6mm on the “big” side and 3 on the “small” side.
Hey friend, thanks for this wonderful instructional video! I’m about to buy my first set of tapered rulers. Any thoughts between the 2 you showed? Which do you prefer? Trying to decide between them.
Whatever you shoot the most. I have 10 different taper templates for my most common tapers for all the ammo sizes I shoot. Aliexpress has good prices for them.
What size cutter is that? They say you need a 60 mm cuter from their site because it works the best with the ruller because of the tall edge. Is that true? Do you have to tilt your cutter because it's smaller?
Yes, I use a 60mm roller cutter. I don't have to tilt mine. The cutter that goes with it though has a lip that catches on the ruler. Definitely a big help. I have that roller cutter as well.
Thanks for showing. I also have these cutting rulers. But in the meantime I prefer to use templates. I still use the rulers for experiments with tape sizes.
I much prefer the templates as well!
nice educational review buddy.... 👍🏼👍🏼👍🏼
greeting from Malaysia.
🙋🏻
Greetings friend!
Can you explain how you taper both sides again. You think you can give me a couple of examples here in the comments
Take off half of the raper difference. For a 20-10 taper take a cut of 7-2 off first to give you a square end.
@@SLINGSHOTFEVERpullshootrepeat half of the taper Let’s say I wanted to make a 24-18. Id take away 12-9 first ?
@@cres213from what I gather you get the difference from 24-18 which is a difference of 6 basically 24 minus 18. Then you would taper the first cut to 6 and then half of that which is 3 so I believe it would be 6mm on the “big” side and 3 on the “small” side.
Hey friend, thanks for this wonderful instructional video! I’m about to buy my first set of tapered rulers. Any thoughts between the 2 you showed? Which do you prefer? Trying to decide between them.
Whatever you shoot the most. I have 10 different taper templates for my most common tapers for all the ammo sizes I shoot. Aliexpress has good prices for them.
@@SLINGSHOTFEVERpullshootrepeat gotcha, but what about these "universal" rulers? Any preference between the 2 you showcased?
@@Yinn224 I like the all clear one best.
Can you please explain how you got 5mm when calculating the true taper? Please!
The taper is 15mm x 20mm so the difference is 5mm. This means that you need to taper it by 2.5mm off each side to make it a even true taper.
What size cutter is that?
They say you need a 60 mm cuter from their site because it works the best with the ruller because of the tall edge. Is that true? Do you have to tilt your cutter because it's smaller?
Yes, I use a 60mm roller cutter. I don't have to tilt mine. The cutter that goes with it though has a lip that catches on the ruler. Definitely a big help. I have that roller cutter as well.
I too am in an experimental phase. Where did you get the ruler?
Gzk, and the slingshooting.com are where I got those ones.