So is there a way to slow it down on the MCX? A heavier buffer slows it down on the AR, but there isn't anything like that to control the MCX. Maybe turn the gas down? I had heard if you slightly bend the PMM tab forward, it will give it a little delay and slow it to 500-600 RPM's instead of (800 RPMs). This 500-600 RPM's seems like the sweet spot for control.
When I try to go full send after the first round goes off it ejects, but doesn’t load the second round into the chamber I did have the gas set on unsuppressed but the safety latch for the pin was not removed.. would that cause that problem or would I just need to get a new gas valve?
i see on the website they have two options for that attachment on the upper i have the regular 556 rattler mcx but i dont know which one id have to get
It’s whatever FA trigger they put in when they made it in like 1983. All AR triggers will work in the MCX platform you’ll just need to remove that dumb firing pin safety lever like I did.
It's not federally. Most states this is fine. The way to think of this bar is the same as any standard mil spec bolt carrier in an ar,15. Sur,e, they made semi auto only variants, but the industry standard is that all ARs have a m16 but which can sear trip
I love how beat his guns are… natural battle worn!!!!
I like guns with some cosmetic wear, it show “character”.
I only have these for shitposting reasons now
Pretty sweet setup man! I just picked up a Virtus in 5.56 and am looking for a 300blk barrel
Perfect setup 🔥🔥
Awesome, thank you for the tips!
Man…killer set up
So is there a way to slow it down on the MCX? A heavier buffer slows it down on the AR, but there isn't anything like that to control the MCX. Maybe turn the gas down? I had heard if you slightly bend the PMM tab forward, it will give it a little delay and slow it to 500-600 RPM's instead of (800 RPMs). This 500-600 RPM's seems like the sweet spot for control.
You are a genius
Do you know where I can find the older keymod 10" SD handguard? By the way nice M16 lower.
They’re all over gunbroker. A few new old stock on there now.
When I try to go full send
after the first round goes off it ejects, but doesn’t load the second round into the chamber I did have the gas set on unsuppressed but the safety latch for the pin was not removed.. would that cause that problem or would I just need to get a new gas valve?
i see on the website they have two options for that attachment on the upper i have the regular 556 rattler mcx but i dont know which one id have to get
and does it matter what m16 trigger system i use on my lower?
What trigger do you have in the M16 lower? I've got a Geissele SSF but can't confirm whether it'll work with a Virtus upper
It’s whatever FA trigger they put in when they made it in like 1983.
All AR triggers will work in the MCX platform you’ll just need to remove that dumb firing pin safety lever like I did.
@@Tlicious726 did you also remove the firing pin latch of your VIRTUS?
JOEMEL ALBAN ummmmm I don’t remember but I think so. I know I had to on the original MCX
@@Tlicious726 but did you already run your mcx virtus upper assembly on your M16 lower with milspec trigger group?
JOEMEL ALBAN yes it runs, I just don’t remember if I removed it. I can look next time i shoot it
Thanks for the video. We’re type 7/2 and helped with making ours Fa. What handguard do you recommend for the rattler.
I don’t have a rattler as it was too small, I just run Sig rails as they seem to work the best.
Where in ID are you? I’m going out there for the 2023 fire season, gonna be near Lolo
Are you still able to strip out bcg with that plate in?
Yes
Does the trip bar cause any issues on a standard Semi lower?
Is it illegal to buy and own the Pmm trip bar?
It's not federally. Most states this is fine. The way to think of this bar is the same as any standard mil spec bolt carrier in an ar,15. Sur,e, they made semi auto only variants, but the industry standard is that all ARs have a m16 but which can sear trip
Well for some reason comments aren’t showing up for me. I get the emails and notifications but nothing here.
You think it’ll work on a 3D printed swift link ?
Hahahahhhah no
“I love the lower classes at play.” - Hillary Clinton
Uhhhh k
Full auto is absolutely useless only the ultimately douché does that sh!t, lol
😂😂😂😂😂
The world doesn't need fudds like you. You're why we have senate Republicans voting on red flag laws.