When it says prime it’s legit, they do a check themselves supposedly but it did come out to be real i scanned the data matrix on the side to confirm it
Rather deal with amazon customer service then optics planet. Don't have to deal with restocking fees nor deal with the bs customer service that you get from most 2a websites
@@vietnamtacticalcan you please link the parts that you used to replace the foldable stock? I live in CA and need to replace mine to make it compliant.
Sig makes a shoulder collar (sometimes they include it in the box), and it can be used with muzzle devices that require a 90-degree shoulder so the muzzle device is on straight. If you plan to suppress this, you might be at risk of a baffle strike. I can see the shim crinkling and you can't be sure that it's on completely straight. Surefire also recommends Rockset and should have been included in the box.
This is sick as fùck! Love the sig rifles! I dunno about that b5 tho. I like the original fixed one over that b5 adjustable. Curious what the black sig adjustable would look like on it. Could always paint or have it coated fde.
Sorry to tell you, but you're going to have an issue. On the MCX you need to run a taper adapter if running a non tapered muzzle device. It doesn't stay square if you mount a suppressor.
I definitely would have used blue Loctite. Do you need anything? Is that you should have used the SIG shoulder adapter when you put the warcomp on SIG has a tapered barrel and you want to make sure you get a true alignment.
Nice rifle! But I'd love to see a video, of when you need to change the battery and remove the comp. Red lock tight is a bold move for those applications.
I’m surprised you got that sig flash suppressor off without it being a significantly emotional event. Personally though, I have a form 4 factory spear lt sbr, and I love it just the way it is. Just a Romeo8t and mag.
No i didnt, i have a video using this same method and it just comes right off. The thing some dont know about loctite/rocksett is gradual torque will never do you any good you need to use impact torque to break the threadlocker
@@vietnamtactical as in an impact hammer/wrench? I don’t think I’ve ever seen that. I’ve seen people use an absolute rapid boil. As rapid as the boiling can get. They said it in the water for 20 minutes and then it unscrews. Barring that I’ve never seen anyone able to remove it lol
@@liggerstuxin1 im not sure if impact is a proper term. Imagine pushing someone as gradual and punching someone as more of an impact force. In the long form video i posted about it i believe everyone who commented said it worked, you should check it out its only a couple minutes long youll see what i mean
@@vietnamtactical explains. Does the ejecting work both ways? I never held/tried the Spear in person. Edit: I saw it at IWA, but now I’m choosing between the Spear and DD mk18 milspec.
No it doesnt work both ways, ive owned a mk18 and ill tell you the spear is a better investment, it comes with an adjustable gas block so you can run it suppressed without getting gas in your eyes and lungs it is more accurate as well
@@vietnamtactical that helps me a lot bud. I was just looking at the prices. In my country Spear LT or even MCX is around 300-500€ cheaper than DDM4A1 or MK18. And now there is only two oprions for me: DDM4A1 or Sig Sauer MCX. Both in .223 with a 14.5” barrel. I need to test them first to see which one is a better fit. But SIG offers much better customer support and spares. We are also neighbours to Switzerland, so it doesn’t cost me that much to just ride to their factory store and buy stuff. Any more suggestions?
nice vid man, i've got the spear LT 7.62*39, trying to get a can now since ATF approval date improves. i heard the muzzle device is extremely hard to remove, have you tried to find any gun smith to remove it ?
Did it myself easily, check out my long form youtube video on how to remove muzzles, it took me less than 10 seconds to do. Even showed it in this video of the muzzle just coming off. All you need is a wrench
Hey @Vietac great video! Can you please list which parts you used to replace the folding stock with the tube stock please?! I just a Spear LT today and live in CA. Thank you 🙏🏻
Pretty slick setup my dude, one question though... By the way your light is setup, I imagine you're a right handed shooter, but the offset RMR is setup backwards from how most righties would run it. Any reason?
@@drreaper8856 I push my arm out to where i feel is comfortable than i put my grip where my arm was placed, everyone has a different method but thats what I usually end up doing
Hey man, with that taper on the end of the barrel is it safe to add a suppressor mount and use a suppressor without having alignment issues? That taper looks insane with not much of a shoulder for the muzzle device.
fkn love it bro! excellent taste and good choices. i personally would use a tan crt stock, fde bcm mod 3 grip or the k2 + grip in fde. maybe a surefire brake instead of the warcomp. i hear they lock up easy.
I didnt want a brake since im not going for purely recoil mitigation. I did change the stock to the Midwest Alpha series stock since the sopmod couldnt fold
I would get the Midwest Alpha series stock over a buffer, these are the parts otherwise. MOE K2+ Trijicon Acog 4x32 Trijicon RMR Arisaka Offset Mount BCM Gunfighter Mlok Grip Surefire Warcomp + Taper Ring Surefire x600 w Surefire Button Railscales Mlok Rail Covers I think thats it
Hey bro, you put the flash hider on wrong. Theres an angled collar thats suppose to go under the muzzle device to support the 90 degree shoulder of the flash hider.
Sometimes I envy americans for being able to get any guns they want and tinker like this, then I remember I could do the same with airsoft gbbrs that work similarly to real guns with a steel bolt that goes back into the buffer tube, but with much less recoil yet still present unlike electric airsoft rifles. Like there's a manufacturer in taiwan that makes super realistic gbbr replicas called viper tech, they're like 1300 to 1500 dollars, so almost just as much as the real things, and they're made using the same materials and even techniques, but they shoot little plastic balls instead of lethal lead going over the sound barrier. Anyways, wouldn't an lpvo be a better option? Like a razor hd or vudu? If not one of those budget vicoptics?
LPVO’s are too brittle and serve no real purpose to me. Extra weight for an optic that would only utilize the minimum and maximum zoom, nobody uses the zooms inbetween
Not at all, i have a video somewhere on my youtube showing how to remove any muzzle device with just a wrench and the floor, i didnt use heat or anything. It took me 10 seconds to remove the muzzle
@@vietnamtactical That stock is overkill. You could've used it to keep in a smaller backpack ;( I'm indifferent with your change for grips, but I do love that rubber magpul grip :) Was the change of a flash hider really necessary? You could've got a good muzzle brake :P Optics are clean. Foregrip is aight (would've used dat Daniel Defense Picatany grip :P). And the flashlight... gives the targets the "spotlight" :P
@riiddisbuk2496 i hate daniel defense grips, the angle helps a bit, also on my more recent short i changed the stock to a more low profile one that i can adjust it looks so good, and yes im getting a suppressor soon, and im already good at controlling recoil to an extent, i picked the surefire warcomp since its the best of both worlds, im a more tactical guy so muzzle breaks imo suck way too much flash. You should def check the shorts out man👌👌👌
No, i use an unusual method of taking muzzle devices and barrel nuts off that works on literally everything, i have a vid on it somewhere everyone whos watched it it worked for
@@vietnamtactical I checked through your content and could not find the video. Do you put it in a rapid boil for 20 minutes? That’s what everyone says. Or intense heat. Do you maybe just have a link to the video? I hate to be this annoying…
@liggerstuxin1 th-cam.com/video/g3028-STGvg/w-d-xo.htmlsi=pWvYTdA5ziOhq61c lets hope they dont delete my comment for sending a link but this is my video, i use this method for every muzzle
No Eotech LPVO’s suck. In my experience and personal preference I like something I can bang around and offers a more clear sight picture also something that doesnt require me to move my shooting or support arm just to change magnification. If you have a Vudu id sell it and buy a vortex razor hd II 1-6/1-8.
Too much sound. Not sure how best to put words to the issue. Every little paper crinkle sound, plastic baggie opening, tool turning and cardboard ‘roughness’…..makes my skin crawl. I don’t understand why anyone likes this “ASMR” stuff. I love what you did with the rifle. Looks awesome!! Please consider not doing the extreme asmr audio. One technical thing: the muzzle device needs to be installed with a taper collar. Sig sells one, and so does Midwest industries. Also loctite shouldn’t be used on the barrel/muzzle. Rockset instead.
@rohnek2 as of now no almost at 1000 rounds 50-60 rounds off. If i have a video showing me firing 1 round i dont need to record the rest. But im sure your PSA lineup has a couple rounds thru them
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
For a moment, I was thinking this guy knows nothing about upgrading a firearm, but then I saw the sharpie and I stood corrected.
why did he mark that screw
@@babayaga9102 Sharpies and oil markers are useful to see if screws have gotten loose with recoil over time
Nice video. Personally I’d never order a trijicon off Amazon to many fakes. Optics planet way to go
As long as they say it's in stock, those wait times for back orders be something else
When it says prime it’s legit, they do a check themselves supposedly but it did come out to be real i scanned the data matrix on the side to confirm it
Rather deal with amazon customer service then optics planet. Don't have to deal with restocking fees nor deal with the bs customer service that you get from most 2a websites
@matcha_546 yup trying to get a suppressor and customer service is incredibly horrible
@@vietnamtactical haha damn straight
Putting b5 stock on that just makes it unfoldable
Check out the short on it
@@vietnamtacticalcan you please link the parts that you used to replace the foldable stock? I live in CA and need to replace mine to make it compliant.
Sounds like youbneed to move to a better state @rusty9008
that thing is gorgeous 🤩
I would like more utubers to to this
Fantastic video
Appreciate it🙏
I CHANGED THE STOCK WATCH THE SHORT…
Yo do you have that brace still? I'll buy it from you
@@Quinlan.Monroe no i do not sorry brotha
Do you like the spear LT better than the mk18?
A lot better than the MK18
Very nice. I just ordered a PSA JAKL. Very excited to get it to add all the goodies haha
Sig makes a shoulder collar (sometimes they include it in the box), and it can be used with muzzle devices that require a 90-degree shoulder so the muzzle device is on straight. If you plan to suppress this, you might be at risk of a baffle strike. I can see the shim crinkling and you can't be sure that it's on completely straight. Surefire also recommends Rockset and should have been included in the box.
I had someone tell me about the collar the day i posted this luckily i changed it asap
This is sick as fùck! Love the sig rifles! I dunno about that b5 tho. I like the original fixed one over that b5 adjustable. Curious what the black sig adjustable would look like on it. Could always paint or have it coated fde.
Ive updated the stock since i couldnt fold the b5, check out the new short!
looks great bro, got myself the spead 308... was a blast upgrading it
It's always good sign when screw talks to you while tightening. Note to self; never let this guy touch to my firearms.
Ok cool
Sorry to tell you, but you're going to have an issue. On the MCX you need to run a taper adapter if running a non tapered muzzle device. It doesn't stay square if you mount a suppressor.
I had got one a day after, its on it
IMO
I definitely would have used blue Loctite. Do you need anything? Is that you should have used the SIG shoulder adapter when you put the warcomp on SIG has a tapered barrel and you want to make sure you get a true alignment.
Im uploading a long form video about it that, i so have the shoulder adapter on it now
i usually run my spears stock with a foregrip on it. though now that hybrid is locked behind lightkeeper i don't really run it anymore.
Nice rifle! But I'd love to see a video, of when you need to change the battery and remove the comp. Red lock tight is a bold move for those applications.
Next time the muzzle gets removed is when i get it chopped to 14.5 haha
Looking to get an sig spear hopefully soon!! Bad ass rifle!! 🔥🔥🔥🔥
It's very nice and well made. 👍
Very nice build!!!!
Thanks!
I’m surprised you got that sig flash suppressor off without it being a significantly emotional event.
Personally though, I have a form 4 factory spear lt sbr, and I love it just the way it is. Just a Romeo8t and mag.
Fire build bro🔥
4:05 did you boil the muzzle brake? The Sig Rocksett is legendary.
No i didnt, i have a video using this same method and it just comes right off. The thing some dont know about loctite/rocksett is gradual torque will never do you any good you need to use impact torque to break the threadlocker
@@vietnamtactical as in an impact hammer/wrench? I don’t think I’ve ever seen that. I’ve seen people use an absolute rapid boil. As rapid as the boiling can get. They said it in the water for 20 minutes and then it unscrews. Barring that I’ve never seen anyone able to remove it lol
@@liggerstuxin1 im not sure if impact is a proper term. Imagine pushing someone as gradual and punching someone as more of an impact force. In the long form video i posted about it i believe everyone who commented said it worked, you should check it out its only a couple minutes long youll see what i mean
Happy for you man. Not what i would put on it myself but still, neat.
Badass setup bro!
I appreciate it! I have a huge update on the setup you should check it out
Are you left handed? Just wondering why you would cant the rifle to your right to fire on a red dot. Otherwise great rifle, nice look, good work.
Yes
@@vietnamtactical explains. Does the ejecting work both ways? I never held/tried the Spear in person.
Edit: I saw it at IWA, but now I’m choosing between the Spear and DD mk18 milspec.
No it doesnt work both ways, ive owned a mk18 and ill tell you the spear is a better investment, it comes with an adjustable gas block so you can run it suppressed without getting gas in your eyes and lungs it is more accurate as well
@@vietnamtactical that helps me a lot bud. I was just looking at the prices. In my country Spear LT or even MCX is around 300-500€ cheaper than DDM4A1 or MK18.
And now there is only two oprions for me: DDM4A1 or Sig Sauer MCX. Both in .223 with a 14.5” barrel. I need to test them first to see which one is a better fit. But SIG offers much better customer support and spares. We are also neighbours to Switzerland, so it doesn’t cost me that much to just ride to their factory store and buy stuff.
Any more suggestions?
You know you’re a gun guy when you have a vice in your living room😂😂😂
That nice bro, Now it's time to upgrade it to 300blackout..
Y is the front grip on backwards??
I do the same thing, its for a better angle of grip to hold on to. Works best when C clamping.
Just like joe said, better for a clamped grip
nice build i'm on my 3rd lt great gun
nice vid man, i've got the spear LT 7.62*39, trying to get a can now since ATF approval date improves. i heard the muzzle device is extremely hard to remove, have you tried to find any gun smith to remove it ?
Did it myself easily, check out my long form youtube video on how to remove muzzles, it took me less than 10 seconds to do. Even showed it in this video of the muzzle just coming off. All you need is a wrench
IMHO the RMR is better in the ACOG. But a good canted setup is good too.
I have the same set up only on a rifle I trust more. And I’m right handed
Before/Aftet?
Keep working on your guns beautiful toys
im too broke to afford one but if i could i would LMAO
Hey @Vietac great video! Can you please list which parts you used to replace the folding stock with the tube stock please?! I just a Spear LT today and live in CA. Thank you 🙏🏻
Yes i have a long form video about it sorry about the late reply
Nice video man
Loctite is my favorite lubricant.
‼️
@@vietnamtactical trust its super fire
@@vietnamtactical btw i love your content
Pretty slick setup my dude, one question though... By the way your light is setup, I imagine you're a right handed shooter, but the offset RMR is setup backwards from how most righties would run it. Any reason?
I am indeed a left handed shooter but the light is far enough forward that it doesnt get in my way when im handling the switch
hey buddy，I was wondering if the stock can be completely folded, it's much bigger than the oringinal one
@@233-o9y unfortunately the b5 cannot, i switched to the midwest alpha stock
1st of all it's a great looking weapon system great weapon system overall Second of all the foregrip is backwards
On purpose
Thank you and why
Ergonomics, better when hands are sweaty
Well done
How do you decide where to put grips? As in the distance between your trigger hand and the other
@@drreaper8856 I push my arm out to where i feel is comfortable than i put my grip where my arm was placed, everyone has a different method but thats what I usually end up doing
@@vietnamtactical does grip placement affect recoil?
@drreaper8856 not really unless its too close to the magwell, its all technique and what muzzle youre running👌
This is one of the best looking rifles out there! Although imo I don’t really prefer the acogs, but great optic. Love the vid man! Sub
Personally I like the eotech with magnifier 💯 pretty expensive though. Seen you’ve tried it, doesn’t suit everyone.
@Chasetactics had that combo on the mk18 great option as well
Hey man, with that taper on the end of the barrel is it safe to add a suppressor mount and use a suppressor without having alignment issues? That taper looks insane with not much of a shoulder for the muzzle device.
Its fixed
@@vietnamtactical What was fixed exactly?
@takumif7056 i got a barrel collar right after the video
@@vietnamtactical Ah okay, I understand. Did you have to send it to Sig to have that done or is that something you did on your own?
@takumif7056 something i did on my own. Sig sent me it tho
Do you have a list of all the items bought including the scope?
In my spear lt breakdown video its in there brotha
@@vietnamtactical 🙏🙏🙏
fkn love it bro! excellent taste and good choices. i personally would use a tan crt stock, fde bcm mod 3 grip or the k2 + grip in fde. maybe a surefire brake instead of the warcomp. i hear they lock up easy.
I didnt want a brake since im not going for purely recoil mitigation. I did change the stock to the Midwest Alpha series stock since the sopmod couldnt fold
What pocket knife are you using ?
Its an ULTA utility knife
@@vietnamtactical tysm!
You need the taper adapter for the flash hider
I have it on it now, had someone tell me earlier👌
Can you provide the parts number for the stock and tube? Getting my LT next week!
I would get the Midwest Alpha series stock over a buffer, these are the parts otherwise.
MOE K2+
Trijicon Acog 4x32
Trijicon RMR
Arisaka Offset Mount
BCM Gunfighter Mlok Grip
Surefire Warcomp + Taper Ring
Surefire x600 w Surefire Button
Railscales Mlok Rail Covers
I think thats it
@@vietnamtactical Hell Yeah! Appreciated!
Hey bro, you put the flash hider on wrong. Theres an angled collar thats suppose to go under the muzzle device to support the 90 degree shoulder of the flash hider.
Ive already fixed that
@@vietnamtactical Good. Your rifle looks sick btw. Makes me want to swap mine over to a 16 instead of the 11.5.
I almost cried when you changed the stock😬
If you owned a spear you’d understand its garbage
@@vietnamtactical Have you ever tried AMD-65 with factory stock? 😂
I can't tell what hand you shoot with your RMR on one side and your switched light on the other...why?
Im left handed but the light on the other side is just more comfortable for me
Can the stock still fold or does that only work with their thin stock?
Yeah it couldnt fold i returned it and got the Midwest Industries Alpha AK stock and it folds perfectly
@@vietnamtactical thanks!
how many shims did you put for the warcomp?
Only the big shim thats it, but all threads are milled at a different angle so youll either be lucky or have to keep repeating the shims
Is that left sided canted site ok with you? I woulda put it on the other side, but Im sure its user preference and I've just never seen anyone do that
Im left handed
Your videos are satisfying, but making me want your expensive taste. It's hard to convince myself (I don't need to upgrade anything)
Dont go homeless getting expensive stuff haha. Id say get a beater and upgrade it over time
@@vietnamtacticalThat's what I do. Not so much with AR's. Eventually, maybe. Can't tell the wife
how the hell did the muzzle break come off so easy wow lucky
Try how i did it in the video its that easy, i have another vid showing how i take any muzzle off with nothing but a wrench
Damn some of the parts you put on don’t need to be very tight as long as it’s good
Whole update on the setup on my newer vids
very nice
Did you really use red lock tight
Rocksett is almost the same if not harder to deal with lol and thats what comes with it
Nice gun
Hey bro i got a Ta50 ACOG yesterday for $300 I’ll let you know if i like it
Really good deal hope the 3x is crisp n clear
Nice vid! Take my subscription
You gotta torque, your flash hider with a wrench fam 😂😂
Cant see it but i did…
Sometimes I envy americans for being able to get any guns they want and tinker like this, then I remember I could do the same with airsoft gbbrs that work similarly to real guns with a steel bolt that goes back into the buffer tube, but with much less recoil yet still present unlike electric airsoft rifles. Like there's a manufacturer in taiwan that makes super realistic gbbr replicas called viper tech, they're like 1300 to 1500 dollars, so almost just as much as the real things, and they're made using the same materials and even techniques, but they shoot little plastic balls instead of lethal lead going over the sound barrier. Anyways, wouldn't an lpvo be a better option? Like a razor hd or vudu? If not one of those budget vicoptics?
LPVO’s are too brittle and serve no real purpose to me. Extra weight for an optic that would only utilize the minimum and maximum zoom, nobody uses the zooms inbetween
What do you do for a living?
Military but I make a bit of passive income
You didn’t add the adapter before you added the muzzle device.
I ordered it and installed after this video
This was a dope video 👍🏾
What wrench did you use to crank the muzzle device off?
I used a 7/8th Pittsburgh wrench
@@vietnamtactical thanks
How much did you pay for the acog??
$1100 or $1200 something around that
@@vietnamtactical thank you… and your spear came out really nice 👍
I love watching these videos. People improving their firearms. NOW TRAIN.
Was it hard to remove the Rocksett Sig Muzzle Device?
Heat up along the threads with a small torch on any device and remove quickly.
Not at all, i have a video somewhere on my youtube showing how to remove any muzzle device with just a wrench and the floor, i didnt use heat or anything. It took me 10 seconds to remove the muzzle
ASMR, you upgraded a rifle that MAAAAAYBE needed a few things, but you put waaaay to much :P
Good stuff. Now transfer it to me :P
Only put like 5 things on it😭
@@vietnamtactical That stock is overkill. You could've used it to keep in a smaller backpack ;(
I'm indifferent with your change for grips, but I do love that rubber magpul grip :)
Was the change of a flash hider really necessary? You could've got a good muzzle brake :P
Optics are clean. Foregrip is aight (would've used dat Daniel Defense Picatany grip :P).
And the flashlight... gives the targets the "spotlight" :P
@riiddisbuk2496 i hate daniel defense grips, the angle helps a bit, also on my more recent short i changed the stock to a more low profile one that i can adjust it looks so good, and yes im getting a suppressor soon, and im already good at controlling recoil to an extent, i picked the surefire warcomp since its the best of both worlds, im a more tactical guy so muzzle breaks imo suck way too much flash. You should def check the shorts out man👌👌👌
@@vietnamtactical There is an mlok version of DD. But whatever works for you.
I just love that picatiny grip :P
wow❤
must be nice
Yea I always liked the idea of the sopmod stock but the thing is just too stupid, better off with a CTR with a chin riser
Alpha AK stock on the Sig folding adapter is king
Was the Rocksett an issue?
No, i use an unusual method of taking muzzle devices and barrel nuts off that works on literally everything, i have a vid on it somewhere everyone whos watched it it worked for
@@vietnamtactical I checked through your content and could not find the video. Do you put it in a rapid boil for 20 minutes? That’s what everyone says. Or intense heat. Do you maybe just have a link to the video? I hate to be this annoying…
@liggerstuxin1 th-cam.com/video/g3028-STGvg/w-d-xo.htmlsi=pWvYTdA5ziOhq61c lets hope they dont delete my comment for sending a link but this is my video, i use this method for every muzzle
a oikhau nay choi ntn
Warning: for display use only, firing this weapon is prohibited
in germany you just cant buy the spear :(
Hopefully one day every country will see guns as just tools
Hola alguien sabe dónde puedo encontrar más videos como estos ??
Im not sure if there is a specific category
put a EOtech vude on that bihh and get rid of the ACOG and canted RMR
No Eotech LPVO’s suck. In my experience and personal preference I like something I can bang around and offers a more clear sight picture also something that doesnt require me to move my shooting or support arm just to change magnification. If you have a Vudu id sell it and buy a vortex razor hd II 1-6/1-8.
bussin
Hell yeah!
You a lefty?
Ye
Are you lefty?
@@jg3_75 yes unfortunately
@@vietnamtactical ok lol. The offset dot on the left side threw me off lol. Nice set up.
Too much sound. Not sure how best to put words to the issue. Every little paper crinkle sound, plastic baggie opening, tool turning and cardboard ‘roughness’…..makes my skin crawl. I don’t understand why anyone likes this “ASMR” stuff.
I love what you did with the rifle. Looks awesome!! Please consider not doing the extreme asmr audio.
One technical thing: the muzzle device needs to be installed with a taper collar. Sig sells one, and so does Midwest industries. Also loctite shouldn’t be used on the barrel/muzzle. Rockset instead.
You had 5 minutes and 14 seconds to either click off the video or turn the volume down😭. I do have a taper ring tho thanks for the heads up
Upgrading? You changed some items. Don’t people cry rivers about needing to do this to Glocks.
Well i dont since i got the money for it. I did a lot more since this video im making a long form vid about the spear soon!
Amazon 🤦♂️
"AFTET"
still a bendy boi
Tighten the barrel clamp and it fixes that issue
having this and still miss
Someones coping
Rattle can.
ewwwww, he's a lefty!!! lol. nice set up though.
looks unfired...
Literally brand new in this video… maybe you should look at my channel lmao
@@vietnamtactical looked at all videos with shooting in it, can confirm it is unfired
@@vietnamtactical so its unfired then….
@rohnek2 as of now no almost at 1000 rounds 50-60 rounds off. If i have a video showing me firing 1 round i dont need to record the rest. But im sure your PSA lineup has a couple rounds thru them
I can confirm youre a troll.
😂
만지기 전에가 훨씬 좋네/ 왜 저렇게하는지 이해가안감
The stock it comes with is horrible with magnified optics. With a red dot its fine
cant upgrade garbage - still a turd
My rifles barrel doesnt lose zero when i press on it, does yours?😭