How To Change a Tire 2016 Ford F150

In this video I show how to get to the tire change tools and how to lower the spare on a 2016 Ford F150.
More in depth video on jacking up an F150:
• Video
Owners manual Link:
cdn.dealereprocess.com/cdn/ser...

[@Team955]

I can't thank you enough. This video help me a lot yesterday on the side of the Highway. I did not know how to lower the spair tire. It's always fun to see people taking their time to help others without anything in return. God bless you man.

[@thefiXfiles]

Awesome man! Glad you got it fixed up. I've been there and it's hard to think straight with cars blowing by you at 80mph.

[@ronmacleod714]

Excellent! You are the only one to show how to angle to find the hole to lower over the tire!

[@raullanderos1751]

Concise, precise, short and descriptive enough. Thanks so much.

[@madipaysam4075]

Thank you for this video! We are dealing with a flat on the side of the highway right now and this video helped us big time!

[@thefiXfiles]

Awesome! Glad it helped.

[@Powerstroke98]

Now that I've gone out and done this in my driveway, I have a 'tip' or two that may help some....keeping a short block of wood (2X4 six" long in the truck) which is helpful I found, getting one edge of the tire lifted once it's on the ground, so you can wiggle with apparatus at the end of the winch! An easy way to pull the tire out, is using the tire iron (under bottom of tire) and hook it to the rim, and pull the tire out! I also cut four 1/8" thick rubber pieces, which I sat on the tire in the four locations the tire hits on the frame, so any rubbing won't affect the tire once it's in place...as it IS the outside of the tire showing once it's on the truck, that gets rubbed. Again, this is up to the individual, but I found rather than using the tire iron to lower and raise the tire/winch, a 14mm socket fits the end and I have a 1/2" universal that fit's into my drill, that I can put the 14mm onto, and it lowers and lifts nicely...just don't tighten the winch too tight at the top...as I brought it within an inch, then used the tire-iron to finish the tire lifting procedure! I pulled my tire out and gave the tire a good wash! This is on my 2016 F150 XLT with 133K, but the tire is new...and oddly, a different sized tire & rim than what's on the truck! I have 275/55R 20 on the truck, and the spare is a 265/65/18 and the circumference IS a little different, but I assume it would be fine still, as a spare...but I didn't know this, as I've never had the spare down...as it's a metal rim unlike what's on the truck. Also, take the time to check the air pressure, as mine was down to 20 psi, so I put it up to 38 psi, to last for some time with any possible leakage over the years! Unsure why, but I had a heck of a time, getting the 'lock' device that plugs the bumper hole, so if your on the road with a flat, wait until you get home to put the lock in place!

[@alejandini3133]

I appreciate your detailed video! Thanks for the extra tip at the end!! 🙂

[@rexixtencia1]

This help me putting everything back together behind the seat, suscribed!

[@anthonycade6462]

Thank you. Short and to the point.

[@MasterBadass]

Not sure what's worse, the fact that I felt stupid watching this or the fact that I would of been very wrong about literally all of this. Didn't even know the jack was in the back seat Lol. Thanks for the upload.

[@markd1882]

one of the best videos on the internet! superb!

[@M4KERB]

Thanks man. super helpful.

[@007balzak]

Thanks a great help!

[@willsoonmarc8711]

Check that lock cylinder every now and then they freeze up sometimes.If so wd40 from the backside or some light tapping from backside of the lock cylinder.

[@bentonbee1]

Good video

[@mariomoreo1451]

Thank you !!!

[@mastabas]

What floor jack are you using to lift it?

[@jackstraw6841]

Thanks!

[@johnpost9524]

What is the hook on the lowering rod for?

[@jass7981]

Now this is how you make a video.

[@steveb8969]

Thank you sir

[@Fstmt09]

Thank you

[@stevengonzales2238]

The lock won't come.off, any idea as to why?

[@tonymarino1730]

It's like Ford went out of their way to hide the jack. I honestly thought they forgot to put the Jack in the truck after I was stuck on the side of the freeway with a flat tire I ended up calling a tow truck🤑 and later finding out from the dealer where the jack was 😨. Not a good location....