ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Helpful Hints for SoildWorks: Automating the Flex Feature
ฝัง
- เผยแพร่เมื่อ 8 ส.ค. 2024
- Today's Lesson:
Automating the Flex Feature
In this presentation, you will learn how to bypass confusing flex feature settings by...
1. Creating a simple layout sketch
2. Linking the Flex feature to the layout sketch through equations
3. Use the layout sketch to change the Flex feature properties
4. Great for configurations and animations!
Great video! Lots of useful info. Thanks for posting.
Can you prepare a video, how did you make an animation of this bending part?
Excellent video. Thank you.
Very detailed demo,Thank you
Very useful for applying the Flex feature, it would be interesting to know how everything was implemented in the motion animation system. Is it possible or where can I find information on how the animation of this folded part was made?
@Christomb
hello
can please upload the video how you animated the tube bending.
That last animation with Photoview 360 is so cool. I'm looking to do a bending animation similar with that.
you find this fun???
yea. That's what i'm working on a Hien
impressive!!
How You add a driven dimension to the equation???
i can't do this!
Thanks
WOW!
That's good, I'm very impressed and thankful for your effort.
hi i have a quick question with the flex feature can you give the pipe an exact angle of measure i have never used it and i am very interested in learning Thanks
Impressive, but it looks like the tube's cross section is compromised because of the bend - not just within bend but at the end of the tube as well. Is it a material specific outcome or a flaw in the SW process?
Mike
Can you please upload the video of how to animate the tube being bent.
thank you
I don't see any flex angle dimension (D0 in your case) after the Flex feature is created. Solidworks Premium 2019 SP5.0. I ensured all the same hide/show options, but not seeing anything. Tips?
can you please upload the video of how animate the tube bent in inventor or solidworks.
THANK YOU!!!
thank a lot to you.
Hello, Is it possible to use DEFORM feature tool on a star 3D model? Little kids love stars...I am thinking how to make the "DEFORM" rotation.... then (180deg) two sides tip of star will be stretched accordingly. It seems very difficult I have tried for sometimes but just couldn't figure out. Do you have any suggestion?
Serious question, but it seems like using a sweep with a properly constrained sketch would be easier for this than the flex command. What's the advantage to this technique?
+David Moscoe the advantage of this is that you can have a "flat pattern" of the tube for manufacturing purposes.
Wow!!! Super
Ты крут!
@tubemaster2012 Me or Mikejwilson ?
I have no videos for Inventor modeling. I quit Inventor for a while now. Solidworks is better, but at the bend tool, Inventor is better.
Solidworks is so great, but at the moment to bend, Inventor is much muuuuuch better. I dont like how Solidworks does perspective as well.
не видно нихрена
great job....
hi...get me in touch ..want to focus on tutorial.