Honda helix adjusting valves

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ม.ค. 2025

ความคิดเห็น • 40

  • @billszekely9868
    @billszekely9868 2 ปีที่แล้ว +5

    Thanks Tony for all of your videos on the helix.

    • @1tonysgarage
      @1tonysgarage  2 ปีที่แล้ว

      You r welcome thanks for watching

  • @IngenisoRic
    @IngenisoRic ปีที่แล้ว +1

    Muchas gracias, aclaro mis dudas 👍

  • @rexfranks1159
    @rexfranks1159 ปีที่แล้ว +1

    Awesome! Thanks man.

  • @nery878
    @nery878 9 หลายเดือนก่อน

    Greetings Tony I have a quick question . Any advice on removing the head cover gasket ???

  • @CarlosHernandez-ur4lz
    @CarlosHernandez-ur4lz 2 ปีที่แล้ว

    Hey Tony thank you for the video on removing the muffler mine seems to be overheating I ordered a new thermostat would you happen to have anything on how to remove the old one thank you very much sir

    • @1tonysgarage
      @1tonysgarage  2 ปีที่แล้ว

      No haven’t done thermostat yet I’m going to be doing mine this fall thanks for watching

    • @ScottWiecenski
      @ScottWiecenski 2 ปีที่แล้ว +1

      I would replace thermostat, thermostat temperature sensor and radiator cooling fan temperature sensor. It's a grand total cost of maybe $30.00, but at least you know those parts are all brand new. (All three of those parts are known to go bad over time). If you still have overheating problems, move on to the radiator, fan and water pump.

  • @jamesross4240
    @jamesross4240 ปีที่แล้ว

    Big thanks!

    • @1tonysgarage
      @1tonysgarage  ปีที่แล้ว

      No problem glad I could help thanks for watching

  • @CarlosHernandez-ur4lz
    @CarlosHernandez-ur4lz 2 ปีที่แล้ว

    Hey Tony where is the stator location on the helix?

  • @BenjaminSteber
    @BenjaminSteber 2 ปีที่แล้ว

    I just replied on another of your videos about my engine missing. I think you would want me to fix it with these instructions, no?

  • @kevinspahr6632
    @kevinspahr6632 2 ปีที่แล้ว

    Thanks for the valve adjustment......."How to" video!!

  • @austineldridge4966
    @austineldridge4966 2 ปีที่แล้ว

    Well I attempted to adjust my valves, got rid of the ticking noise, runs fine, but at idle it has a slight inconsistent miss… any idea. Maybe fine tune the exhaust adjustment, had to stop messing with it engine got warm

    • @1tonysgarage
      @1tonysgarage  2 ปีที่แล้ว +1

      It could be the spark plug or the boot that is on top. I had one go bad

    • @austineldridge4966
      @austineldridge4966 2 ปีที่แล้ว +1

      @@1tonysgarage I’ll replace the plug (who knows how old it is) and make sure the boot is nice and tight. I’ll try to fine tune it in the morning when engine is all the way cold

    • @austineldridge4966
      @austineldridge4966 2 ปีที่แล้ว

      @@1tonysgarage thanks 👍🏼

    • @austineldridge4966
      @austineldridge4966 2 ปีที่แล้ว

      Still have a inconsistent miss, slight putter sound coming from the muffler. Replaced the spark plug took off and cleaned/inspected intake boot, no cracks. Runs fine still maybe exhaust gasket is starting to fail 🤦🏻‍♂️

    • @1tonysgarage
      @1tonysgarage  2 ปีที่แล้ว

      @@austineldridge4966 ya I commented on helix group is the exhaust gasket new. I think that it is possible exhaust gasket might cause that

  • @sjjvddyumiherhv3709
    @sjjvddyumiherhv3709 2 ปีที่แล้ว

    hi i just have a question do honda helix share the same engine with the honda freeway 250 (mf03)(ch250 new model) ?

    • @1tonysgarage
      @1tonysgarage  2 ปีที่แล้ว +1

      Not sure on that sorry

    • @jeffmcelroy5364
      @jeffmcelroy5364 2 ปีที่แล้ว +1

      yes its absolutely 100% the same engine.

  • @tagerauen5378
    @tagerauen5378 ปีที่แล้ว

    Nice

    • @1tonysgarage
      @1tonysgarage  ปีที่แล้ว

      Thank you and thanks for watching

  • @1957charlyheinz
    @1957charlyheinz ปีที่แล้ว

    Super.

  • @petergunn9149
    @petergunn9149 2 ปีที่แล้ว

    I need some advice what do you think about a 99 helix with 8500 miles on it for 2000🤔

    • @1tonysgarage
      @1tonysgarage  2 ปีที่แล้ว +3

      Sounds like a pretty good deal. I would ask him about when belt was changed how often oil is changed look at the tires rear tires last about 3200 miles. Wait to ask these questions when u r with the guy and looking at bike. If u message those questions to him he might back out on selling to you. People r funny. I would probably try to get it for 1500-1800 offer him 1500 and see what he says again that is while u guys r together looking at bike. That’s my opinion thanks for subscribing and watching

    • @petergunn9149
      @petergunn9149 2 ปีที่แล้ว

      @@1tonysgarage Thanks for the advice I really appreciate it 👍👍👍

  • @lowspeed2
    @lowspeed2 2 ปีที่แล้ว

    Every 1000km,I do my FUSION adjusting valves just like you.

  • @조현리-f6w
    @조현리-f6w 2 ปีที่แล้ว +2

    Jesus is the true priest. If you believe in Jesus, you will be set free from sin and curses forever. Jesus is a true prophet. If you believe in Him, you become a child of God. Jesus is the true King. If you believe in Jesus, you will be set free from the power of Satan forever. Believe and accept Jesus.

    • @AcceleratingUniverse
      @AcceleratingUniverse 2 ปีที่แล้ว +2

      no doubt

    • @1tonysgarage
      @1tonysgarage  2 ปีที่แล้ว +2

      Thanks for watching

    • @ScottWiecenski
      @ScottWiecenski 2 ปีที่แล้ว +5

      But does he know how to adjust valves on a Honda Helix?

    • @raymosmookle9373
      @raymosmookle9373 3 หลายเดือนก่อน +1

      @@ScottWiecenski I heard he built a hot rod for Gibby Haynes in the 90's.

    • @ScottWiecenski
      @ScottWiecenski 3 หลายเดือนก่อน

      @@raymosmookle9373 Gibby vaguely remembers that, but he got to get him a trailer park and hold my world around.....BTW, Jerry Lee Lewis was the devil, and Jesus was an architect previous to his career as a prophet.