A CRACK in our KEEL?!?! - Ep.38 S3
ฝัง
- เผยแพร่เมื่อ 19 เม.ย. 2021
- We haul out SV Kiana to do some regular maintenance and install a transducer below the water line and quickly find out that we were up for a couple bigger projects then we had planned.
Follow us on Instagram!
@breakingwaves.sailing
@bw.alie
@ben.p.whyte
If you like what we do and want to support channel find us at www.patreon.com. A portion of all Patron contributions are going to Rugged Coast Research Society (the more you contribute the more we donate!). www.ruggedcoastresearch.com
Suggest at every haul out to visit the keel bolts, take one Nut off at a time, put anti corrosion grease on the stud, then put Nut back on and torque to specification......very few Catalina owners do it....only to regret it.........
Well done. Very enjoyable clip. It's nice to see video of the PNW cruising grounds. Arguably the best cruising in the world.
I have always luved the Sceptre 41. Built in Canada and a true world cruiser.
Regards.
AL
C&C 35 Mk3
Vancouver, BC.
Thanks Al. Yes the Sceptre is a great boat, really happy with it. Really looking forward to getting some serious ocean miles under her keel and sail her, they way she was built to be sailed, but in the mean time we are loving our local cruising grounds while we get her ready to go!
Fair Winds !!
Allie just brightens my whole day!!! She's simply the best.....i smile whenever she comes on...wish they'd release a vid a week instead of one every other week...its too long in-between!!!!.lol...love the show
well you should see her before coffee
@@BreakingWavesSailing lol 😂
We have the same transducer hooked up to a Vulcan MFD, and love it. Hope you’re enjoying the wealth of info about when you’re about to run aground like we are. Within about a week of having it we ran aground in a harbor, sorta on purpose (it was a dock at a bar and we... needed to dock there), and it was a perfect moment to calibrate the offset so now we know exactly how much is under the keel (so 0ft. MEANS 0ft.!!!).
I’m dying of laughter at how you “needed to dock there”. That’s hilarious I guess we’ll find out after too!
Great job guys keep up the good work cheers
I owned and ran a boatyard in the Northeast for 35 + years. The crack in the keel sump joint is not unusual in fact it’s quite common. Tighten up on the keel bolts, grind a 10” path around the entire keel / sump joint 5” on the keel 5” on the sump. Apply 2 layers of biaxil glass with west system
Fare the glass with epoxy faring compound. Your back in business.
On your video you show the problem with not starting ? When you have a no start situation you need to shut off the engine intake seacock, when turning over the engine the raw water pump is pumping water into the exhaust pot / muffler, if you turn the engine over long enough it will fill the exhaust pot and the water will back up right into the engine through the exhaust valves. This sounds impossible ? Right ? Believe it or not I saw this problem more times then I care to remember. Good luck !
hey Todd, thanks for the tips!
Nice work guys! Well done 👍🏼
Smart plug = smart decision
yes it was on the list for
some time until had no choice.. lucky!
Yes... That was scary! I found something similar on the inside of my distribution panel. The main supply wire had frayed enough to reduce the amount of strands this increasing the resistance enough to melt off about 2" of insulation down to bare copper!!!! Yikes! So so glad I found it before it became a fire.
Watching from the Uk 🇬🇧
Wishing everyone safe sails forever and longer. 🌟⛵️☀️🌍
That damn Catalina Smile!
Cheeeeese
Great video! Nice work guys!
Ya, great tip!
That’s not that bad a fix. Could just be the attachment bolts need tightening. Hey perfect time to inspect and repair them if needed… maybe a little faring too for an increase in performance.Hey, losing a keel is a real bad breakdown because your vessel is a gonna go turtle upside down. A real problem.
The “Catalina Smile” .......ouch ! It’s watching your videos that makes me smile though - keep em coming ! 😊👍
The crack... this is a standard issue. The keel hangs below the boat and pulls away from the hull. The manufacturer typically uses a flexible caulking to allow a bit of separation as no matter what you do the crack will come back.. so you will see this again.. it is not at huge issue... you find very few sailboats with external ballast without this smile.. I have a Swan and yes we also see this on these ladies...
Fair Winds!
Mike an EX Strait of George sailor... now in Denmark
That makes us feel better Mike thanks!
Great episode guys! Awesome to see the progress!!
A plastic thru hull? Kinda sounds scary, I guess I've been out of saltwater boats a few years.
Who does a thumb down on your videos? They must have a sad life. You guys are great!
Or they don't like cracks
I need some more explanation on pulling the fire extinguisher pin? Like by accident? The pin does nothing but prevent the trigger to be pulled... The cockpit looked a bit hazy though. Was it related to the melting plug? Why was the plug all scorched?
ha fair enough, the old
fire extinguisher was placed on the bed in the v berth and somehow the pin was pulled and the bedding it was wrapped up in pulled on the trigger for about 5 seconds... the plug thing happened weeks earlier, a friend stepped on the shorepower chord while
leaving the boat, it created a short and melted the plug. Totally unrelated.
Breaking Waves Sailing?!? More like Breaking Yer Back
Breaking waves and breaking boats
Great job! Kicking' butt!
I’m excited for the new season 🤣
Excellent music this episode.
Geez cracked keel, plug fire, stove issues, you guys are having the same issues we are 🤣🤣 maybe it is a Vancouver Island curse 🤣🤣
It's never ending buddy haha
Is that Dewalt a good random orbital sander? I'm getting prepared to sand my hull down to the glass. Don't want to over or under buy. Thanks!
it is, bud if you are doing the whole hull Inwould go with a larger one (or rent from the yard because you probably don’t want to stow it in the boat for how often you need it)
Never knew that catalina had that issue. Good to know.
All boats with bolt on keels could have this problem, not just Catalina. I have a Cat and no problem. I've seen Ericson and Pearsons with this.
@@joes7166 never knew that. I appreciate it.
Yeah my Valiant 40 had this issue too
Didn't you two love birds go aground due to tide? Cause the "smile" you think when pulled off?
ha we did just barely louch ground at low tide, and I think only the rudder. You’ll see next episode, we got a few cranks on each of the forward keel bolts
This is where you meet celebrities!!
Next episode you’ll be the celeb!
The thumbs down is most likely a rival youtuber channel... Welcome to haul out. If you plan a week allocate two... That hole within a hole saw is new to me. Great tip... and welcome to season three you two...
👍
Sorry, but I doubt your keel smile is solved with just applying some epoxy to the crack. This is a potential problem with all boats that have a bolt on keel, not just Catalina. The bolts are probably loose because the Mfg of the boat used a wood filler where the keel attaches to the hull. It is encased in FG but any cracks, even microscope, will let water in and rots the wood. Especially if they used plywood. This causes the structure to be soft and sag letting the keel down. Good news is your keel will probably not fall off unless you ground the boat especially hard and would have damaged the boat severely even if it were perfect before hand. Did you check the torque on the bolts? Are the bolts on the inside 'sinking' into the FG? This a problem not just with older Catalina (I have an 86 model and no problem) but I have seen this on Calalina, Ericson, ODay and others. Permanent fix is to remove the nuts or bolts, grind down and remove the offending rotten wood and build back up with solid fiberglass layers to the original height. Replace the bolts( or nuts) and set the torque. Another way is to drill horizontal holes thru the lead keel (port to strbrd) drill down thru the hull into the keel through these horizontal holes and place threaded rod down the nuts and washers on each side. Then grind down the keel and some of the hull to bare FG and lead and apply three layers of FG tape and resin. Then fill and smooth. This will take much longer than 3 days. I fear next time you haul out the smile will be back. Good luck and I hope I am wrong about this.
hey Joe thanks for the info. you’ll see the rest of the repair we completed in next epsiode, would be interested to hear what you think after that. You could be right, we might be into a situation where we’ll have to drop the keel, inspect the bolts, remove and damage, repair and rebed the lead to FG, but that’s a next year thing!
Enjoy your video's guys for what it's worth look at Sail Cloudy Bay channel this guy will show you any type of maintenance and repair anything on a boat Glen is brilliant I follow a number of sailing channel's he's the best.
Thanks we’ll check em out!
We had a similar problem that we dealt with in our boat yard blues episode on our channel. Maybe we can help with some of your problems!
I am not sure how anyone plans on not being in the yard for min 1 month.
ha perhaps we should
start planning that way
@@BreakingWavesSailing 2 things that never ever go together boat yard and " quick turn around " haha
Hay. #1 viewer today
Hay congrats! Haha
Drop the keel. replace the keel bolts , should be done every ten years especially if you are heading offshore . Its just a maintenance item that nobody will tell you about , but ask anyone working in a yard .
14th viewer today, yea !!
OK, Fix it and then do your dance ....
Alie needs to take Ben back to the shop and ask for a refund or at the very least ask for a guy who can build a shopping mall with a pen knife......
I found a crack please send us money!!!
So fast on the draw!