Just wanted to say thank you for your video. I followed it, my washing machine had a different layout but your video was very informative, I followed it step by step. 1st time ever doing something like this. Thanks again 🫡🧡
Hi, thanks so much for your comment! This is really great to hear, it's pleasing to hear that our video gave you the advice and confidence you needed to be able to replace the drain hose yourself...well done for completing the replacement!
Lindo 100 won’t drain. I’ve reset following a YT video and found out that it was E21. But the water level in the drum is high, so the door can’t be opened. How to open the door manually and then drain the water before carry on with the rest of the test?
Hi. I'm in the process of fitting a replacement drain hose and using this really helpful video. One issue I'm having is with what seems to be a very misleading slot on the very end of the elbow that fits onto the hose attachment on the pump end. The slot should presumably line up with the small stub on the base of the hose attachment but for this to happen, the hose needs to be bent and twisted in a way that, in my opinion, over-strains it. How important is it that these two fit together? If I don't push the hose quite so far on and thereby the slot and the stub don't fit together, will this be more likely to cause a leak? Many thanks, Charlie
Hi Charles, as long as the hose has about a ten millimetre overlap on the spigot and is clamped securely it is not likely to come off or leak so it should not be a problem.
Hi George, we dont currently have a video but the easiest way in your model is to take the back casing off which gives you plenty of room to replace the hose.
Hi Phil, F05 is not an error code on Zanussi machines so what model do you have? if the hose was split it would cause a leak but the drain pump would still work so check the pump and filter first.
Hi Phil, just wanted to be sure we give you the right information to help, F05 on an Indesit washing machine refers to blockage or pump issue so check the filter, drain hose for any blockage and test the drain pump with a multimeter to determine if it's failed.
I don't want take whole hose out, only a section of the hose (sink part) has been damaged. Is there a way of joining it to the replace hose and connecting that to the sink?
Hi, Spring, you can get an extension kit from our website to extend the length of the drain hose, check out our range www.espares.co.uk/search/pt1561/washing-machines/hoses just copy and paste into your browser.
if the 'advice' is missing key components, its not helpful. the good thing about american you tubers is they can take criticism, why is it that some UK people think they are superior. weird.@@DaniCavenderHandley
Just wanted to say thank you for your video. I followed it, my washing machine had a different layout but your video was very informative, I followed it step by step. 1st time ever doing something like this. Thanks again 🫡🧡
Hi, thanks so much for your comment! This is really great to hear, it's pleasing to hear that our video gave you the advice and confidence you needed to be able to replace the drain hose yourself...well done for completing the replacement!
Really clear guide with no waffle, thanks!
Hi, thanks so much for your comment here. Glad you appreciated this video, and hope it helps you to replace the drain hose on your washing machine.
That was impressive. When can you come round and do mine?
Hi 1965MJW, I am confident after watching our impressive video you will be able to do it yourself ☺
Here's hoping - yours is certainly the most calm, clear and informative instruction so if I stopcock it up, it'll be all my own fault! 😏
Take your time and if you get stuck we can help.
Did you take the bottom off too? If so, how does that come off?
Will this work on a Blomberg drain hose?
Lindo 100 won’t drain. I’ve reset following a YT video and found out that it was E21. But the water level in the drum is high, so the door can’t be opened. How to open the door manually and then drain the water before carry on with the rest of the test?
Hi. I'm in the process of fitting a replacement drain hose and using this really helpful video. One issue I'm having is with what seems to be a very misleading slot on the very end of the elbow that fits onto the hose attachment on the pump end. The slot should presumably line up with the small stub on the base of the hose attachment but for this to happen, the hose needs to be bent and twisted in a way that, in my opinion, over-strains it. How important is it that these two fit together? If I don't push the hose quite so far on and thereby the slot and the stub don't fit together, will this be more likely to cause a leak? Many thanks, Charlie
Hi Charles, as long as the hose has about a ten millimetre overlap on the spigot and is clamped securely it is not likely to come off or leak so it should not be a problem.
Have you a video for replacing a drain hose on a Zanussi WASHER-DRYER ZWD 1480 W that has a base plate
Hi George, we dont currently have a video but the easiest way in your model is to take the back casing off which gives you plenty of room to replace the hose.
I am getting an f05 error on my machine, can a split or hose disconnection cause this as its not draining
Hi Phil, F05 is not an error code on Zanussi machines so what model do you have? if the hose was split it would cause a leak but the drain pump would still work so check the pump and filter first.
eSpares its an indisit machine I just thought on the off you may know what the error could be, it's not pumping water out
Hi Phil, just wanted to be sure we give you the right information to help, F05 on an Indesit washing machine refers to blockage or pump issue so check the filter, drain hose for any blockage and test the drain pump with a multimeter to determine if it's failed.
What is the tool you are using to unscrew the top of the machine?
Hi Darryl, Mat is using a nut spinner to remove the screws from the top of the machine.
I don't want take whole hose out, only a section of the hose (sink part) has been damaged. Is there a way of joining it to the replace hose and connecting that to the sink?
Hi, Spring, you can get an extension kit from our website to extend the length of the drain hose, check out our range www.espares.co.uk/search/pt1561/washing-machines/hoses just copy and paste into your browser.
Thankyou
Hi, thanks you...hopefully it helps you to replace the drain hose om your washing machine!
It is a pisstake how short Hotpoint drain hoses are.
you failed to tell us what size hose, you use or what can be used, also you didnnt tell us what size screws and driver you used. it helps people.
Jeez 🙄 nothing like saying “thanks for this free advice”
if the 'advice' is missing key components, its not helpful. the good thing about american you tubers is they can take criticism, why is it that some UK people think they are superior. weird.@@DaniCavenderHandley
your cute
Hi stefane, thank you for your post and we will be sure to let Mat know.