Siemens LOGO! 8 PLC 0BA8 FS04 Modbus TCP Client & Server Test
ฝัง
- เผยแพร่เมื่อ 29 มี.ค. 2019
- Siemens LOGO! 8 PLC 0BA8 FS04의 Modbus TCP Client & Server Test 영상입니다.
This the video for testing Modbus TCP Client & Server by LOGO! 8 PLC 0BA8 FS04. - วิทยาศาสตร์และเทคโนโลยี
유익한 정보 고마워요~
정보 감사합니다 ^^
🙏🙏🙏🙏🙏 GRAZIE !!!
Jimmy, nice explatetion. Can you m ake an example of a logo as modbus master to vdf and hmi under tcp?
I notice that you use position zero and four, assigning the analog input to vw4 and the analog output vw0 to the network input v7.0 v7.1 v7.2. In case you have VW2O and VW18, how do I configure the vX.0 network port?
為何完整依照範例實作，卻無法完成logoo! (client)與Modbus Slaver之間的通續連結?
ESE SISTEMA SE PUEDE COMUNICAR CON UN SISTEMA ANDOVER SCHENEIDER
Hi Jimmy, How to change the device id for Server Logo.
I'm having multiple logo controllers connecting to head end system by modbus/ip
As I know, There is no device id on LOGO Server. only modbus tcp
client can identify by IP address.
@@jimmyplc7613 Thanks Jimmy, is there any option to export logo modbus address register directly from controller
Rony Chacko You are welcome :)
Hi Jimmy PLC!
Could you help me?
When I use LOGO! as a client i cannot connect correctly. If i go to the logo! diagnose section , in software it shows: "01:Client. MODBUS" but then "State: disconnected".
I follow completely your steps. Do you have any idea about the reason of that fail in my Logo?
Could anyone help me? I'd be very grateful.
Thanks.
I have just tested Modbus TCP Client. there is no problem with it. what did you set in LOGO PLC?
drive.google.com/file/d/1JNLssMqn-AmdQyX84dGUUV3RDPRQwh5F/view
drive.google.com/file/d/1FfpJokX4ezpV-ikGimmF0Kbdfky39Fj1/view
로고plc사용법배울수 있을까요?
Why is it V7.0-7.1-7.2 ? Where comes the 7 from? why resambles the 7 to 4x0012
You can see video time at 5:32 that I arrange the modbus address. I started address from 1 to 2 words for Writing and I started address from 11 to 2 words for Reading