Hmmm, I don't use the in-game AB detent. I was using the Warthog Throttle detent which is pretty much physically fixed. So, the curve is to compensate. I use a Virpil throttle now which allows me to physically move the detent and so no longer use a curve here.
Thanks for this work Lynn Sides. For Fa18, my detent location is 25. Your Excel file give me user values 0 10 21 31 41 51 61 70 80 90 100. But it didn't work: after burner come too late. I 'm finally take the standard values 0 10 20 30 40 50 60 70 80 90 100 and modified it a little to 0 9 18 29 40 50 60 70 80 90 100.
It's there by default but can be removed. You must lift up on the throttle and push forward to get past the detent. If you bought the throttle used then maybe the original owner removed it.
@@701Builder There's a strip of metal between the two throttle halves that can be removed by removing the two hex head screws holding it down. The detent is a piece of plastic easily removed/replaced under that metal strip. You can buy an original replacement or a modified one that will allow you to push through the detent rather than lifting the throttle to get past it. Typically less than $10 US. Easy to print if you have a 3D printer.
I can not see Hardware AB Detent option in F18. Just missing. (updated),Whats wrong?
Hmmm, I don't use the in-game AB detent. I was using the Warthog Throttle detent which is pretty much physically fixed. So, the curve is to compensate. I use a Virpil throttle now which allows me to physically move the detent and so no longer use a curve here.
@@sideslyes, me too. but everytime you must say to game, when your HW detent start on axis. And i cant see this option in axis. You have it on video
@@sideslah, info from developer, "This feature has not been prepared yet, and we have temporarily removed it."
Thanks for this work Lynn Sides.
For Fa18, my detent location is 25. Your Excel file give me user values 0 10 21 31 41 51 61 70 80 90 100. But it didn't work: after burner come too late. I 'm finally take the standard values 0 10 20 30 40 50 60 70 80 90 100 and modified it a little to 0 9 18 29 40 50 60 70 80 90 100.
I don’t feel a detent on my warthog throttle.
It's there by default but can be removed. You must lift up on the throttle and push forward to get past the detent. If you bought the throttle used then maybe the original owner removed it.
@@sidesl Thanks for the reply, this is likely the case with my throttle.
@@701Builder There's a strip of metal between the two throttle halves that can be removed by removing the two hex head screws holding it down. The detent is a piece of plastic easily removed/replaced under that metal strip. You can buy an original replacement or a modified one that will allow you to push through the detent rather than lifting the throttle to get past it. Typically less than $10 US. Easy to print if you have a 3D printer.
Thank you, I do have a 3d printer.