AWESOME JOB 👌 DID THIS FOR THE SECOND TIME ON MY WIFES 2010 BMW 535I. I BOUGHT THE CAR NEW FOR HER IN 2010 . JUST HIT 142,000 MILES. A LOT OF MAINTENANCE TO GET IT THERE.
Awesome job !! I'm an e60 fanatic and I just replaced my seal just the other day. At first I was a little worried but your video did give me hella confidence thanks!!
You say you are a e60 finatic. I have a '08 e60 and I was wondering what your experience is about interior rattles. I have a few from different areas of the cabin any tips would be appreciated
I totally understand about the FL sun and how the cars take a beating. Here in Orlando the sun blasts my 2006 550i all day as it rises from the East all the way to sunset. I’m currently replacing my window moulding for the 3rd time. I also replaced the window moulding 3 times when I had my 1999 540i. Like you, my garage is just too full of “stuff”
Awesome work I need to know if I need the lower on my bmw 328i e92 coupe not to certain but I did a change on the rear molding from fcp euro it came out perfect now I'm stumped on the rear lower
I had an issue with the upper left corner, took forever to get it to seat like the upper right one. Also the bottom seal, right side, didn't meld with the glass as easily as yours's did.
Yeah! A little persuasion and a bit of modifying helps for sure. You may want to use a bit of 3m adhesive in order to keep it in place if necessary (green tube). Well thanks for watching and hope it helped you with the install. Any questions feel free to ask.
I bought the car 🚙 I'm the 3rd owner when I got her there was no bottom just curious if one is needed I'll need to hunt for it it's not a high active part from what I'm looking for
I congratulate you, excellent work. I have the same problem, where did you get the replacement rubber? Water is already entering the rear glass of my car, and in fact created a short circuit and the water fell on the radio amplifier and damaged it. I appreciate you can help me.
Digital Media TV I purchased it from my local bmw shop it wasn’t much more than eBay go with genuine parts the after market ones don’t fit correctly and wear faster. Good luck anymore questions feel free to ask.
Was the rear window leaking from this and does this seal the leak? We have been finding water on the floor in the rear seat area. We sprayed water on the car and found the rear both corners were dripping on the rear posts when we did.
superturbocharged the seal around the rear windshield protects from leaking but it’s main reason is to Chanel the water away from finding it’s way in through the factories main window seal. I suspect you have a door vapor shield leak the film has finally separated from its factory seal a common issue with BMW. Your sunroof drains Rear pods can also be clogged. I only changed them because of them rotting and drying out. The capo shields are behind the doors interior panels.
@@hotroderic8318 Thank you. The car was kept garaged since new and really never driven in the rain, but we brought it out this year and unfortunately discovered this. I plan to replace all the seals and get her back in the garage asap.
There shouldn’t be any adhesive used whatsoever... you want to be be able to remove it at any time if necessary or if it dry rots. I’ve installed these weather seal numerous times and never had to use adhesives. Only the front windshield header seal has a 3m peel away double sided tape inside of it to better adhere to the roof of the car to seal it on. Hope this helps you. Thanks for watching.
Dan I’m not using any real tools other than a Snap on non marring plastic scraping kit ... do not use any metal scrapers or chisels unless they are made of plastic. I used a small tiny little green handle pick only as a back up and only used it very carefully to pluck out any stubborn jammed pieces that would just blow out with compressed air. Watch the video carefully and good luck.
Dan Skinner you can go with any set actually I just happen to have that Snap On set cause most of my tools are Snap On and Mac Harbor freight sells a decent set as well if your looking to spend less. In fact I purchased a set from harbor so I wouldn’t turn my 60 dollar set into shit so quickly. Lol. Anyway how ever you feel. Just git’R done!! Good luck!
@@hotroderic8318 Bought a Bojo set off eBay and did it in 20 minutes. A little bit of dish soap on a washcloth as I squeezed a small amount of water to push into place. The corners are the first thing and the rest falls into place. Thanks for your help.
AWESOME JOB 👌
DID THIS FOR THE SECOND TIME ON MY WIFES 2010 BMW 535I. I BOUGHT THE CAR NEW FOR HER IN 2010 . JUST HIT 142,000 MILES. A LOT OF MAINTENANCE TO GET IT THERE.
Awesome job !! I'm an e60 fanatic and I just replaced my seal just the other day. At first I was a little worried but your video did give me hella confidence thanks!!
You say you are a e60 finatic. I have a '08 e60 and I was wondering what your experience is about interior rattles. I have a few from different areas of the cabin any tips would be appreciated
I am very much with you here 😂
Just replaced mine thanks to you. The biggest issue I ran into was getting the second corner pushed into place, otherwise it wasn't bad. Thank you!
Thanks for posting this. I just replaced mine and it was much easier than I thought. Next I have to replace the front windshield cowl.
Just did mine. Thanks for the info. Didn't have a pry tool so I used a flat wooden stir spoon lol
Man, your video just helped me to replace mine. Thank you very much for sharing your experience.
I totally understand about the FL sun and how the cars take a beating. Here in Orlando the sun blasts my 2006 550i all day as it rises from the East all the way to sunset. I’m currently replacing my window moulding for the 3rd time. I also replaced the window moulding 3 times when I had my 1999 540i. Like you, my garage is just too full of “stuff”
Awesome work I need to know if I need the lower on my bmw 328i e92 coupe not to certain but I did a change on the rear molding from fcp euro it came out perfect now I'm stumped on the rear lower
Do you have a link to where you bought the seals from? Great video btw.👍🏽
I had an issue with the upper left corner, took forever to get it to seat like the upper right one. Also the bottom seal, right side, didn't meld with the glass as easily as yours's did.
Yeah! A little persuasion and a bit of modifying helps for sure. You may want to use a bit of 3m adhesive in order to keep it in place if necessary (green tube). Well thanks for watching and hope it helped you with the install. Any questions feel free to ask.
Great video. Crazy how often these need to be replaced.
Nice video.thank you . Just a quest for new one did u use any glue or something or just simply replace?
I just simply replaced it.... no glue is required
I bought the car 🚙 I'm the 3rd owner when I got her there was no bottom just curious if one is needed I'll need to hunt for it it's not a high active part from what I'm looking for
I congratulate you, excellent work. I have the same problem, where did you get the replacement rubber? Water is already entering the rear glass of my car, and in fact created a short circuit and the water fell on the radio amplifier and damaged it. I appreciate you can help me.
Digital Media TV I purchased it from my local bmw shop it wasn’t much more than eBay go with genuine parts the after market ones don’t fit correctly and wear faster. Good luck anymore questions feel free to ask.
@@hotroderic8318 Thank you very much!!!
Do I need any special glue ? The glass shop by me said they needed to remove the glass and apply glue to seal it.
No glue necessary .....and do not remove that glass . They all say the same crap only to rip you off just be super careful
Nice wideo broo,i need this
Igor Kolac thanks I hope it helps you out.
After you installed it, did you ever have to go back n spray it with any water repellent or soapy water? Great job
P_ Sm00th not at all ... once that heat hits that rubber it’s sealed no doubt. Good luck! Any questions feel free.
P_ Sm00th just keep in mind the surface must be squeaky clean
Will be doing video for the front seal as well?
Great tutorial!
I couldn’t put my bottom one in and I come to find out I was putting it on backwards 🤦🏽♂️
I hope this video helped out thanks for stopping by.
Was the rear window leaking from this and does this seal the leak? We have been finding water on the floor in the rear seat area. We sprayed water on the car and found the rear both corners were dripping on the rear posts when we did.
superturbocharged the seal around the rear windshield protects from leaking but it’s main reason is to Chanel the water away from finding it’s way in through the factories main window seal. I suspect you have a door vapor shield leak the film has finally separated from its factory seal a common issue with BMW. Your sunroof drains Rear pods can also be clogged. I only changed them because of them rotting and drying out. The capo shields are behind the doors interior panels.
@@hotroderic8318 Thank you. The car was kept garaged since new and really never driven in the rain, but we brought it out this year and unfortunately discovered this. I plan to replace all the seals and get her back in the garage asap.
Hi who has these seals nowadays with the metal frame that hugs the glass . Cheers .
What about the adhesive?
There shouldn’t be any adhesive used whatsoever... you want to be be able to remove it at any time if necessary or if it dry rots. I’ve installed these weather seal numerous times and never had to use adhesives. Only the front windshield header seal has a 3m peel away double sided tape inside of it to better adhere to the roof of the car to seal it on. Hope this helps you. Thanks for watching.
Ok
@@hotroderic8318
Really appreciate it. Done in 20 minutes and worked perfectly. I almost paid someone $140 to do this....
@@pdogusmc right on!! Anytime!!
Anyone have oem numbers .. my lower needs to replaced
what tools are you using?
Dan I’m not using any real tools other than a Snap on non marring plastic scraping kit ... do not use any metal scrapers or chisels unless they are made of plastic. I used a small tiny little green handle pick only as a back up and only used it very carefully to pluck out any stubborn jammed pieces that would just blow out with compressed air. Watch the video carefully and good luck.
@@hotroderic8318 I have read that the BOJO set that comes with scrapers are good? or go with the Snap On PBN500 kit?
Dan Skinner you can go with any set actually I just happen to have that Snap On set cause most of my tools are Snap On and Mac Harbor freight sells a decent set as well if your looking to spend less. In fact I purchased a set from harbor so I wouldn’t turn my 60 dollar set into shit so quickly. Lol. Anyway how ever you feel. Just git’R done!! Good luck!
@@hotroderic8318 Bought a Bojo set off eBay and did it in 20 minutes. A little bit of dish soap on a washcloth as I squeezed a small amount of water to push into place. The corners are the first thing and the rest falls into place. Thanks for your help.