Audi A8 Sunroof Noise Fixed!!

แชร์
ฝัง

ความคิดเห็น • 48

  • @CalvinPhuong
    @CalvinPhuong 4 ปีที่แล้ว +4

    Excellent job on explaining things on the fly like that. Even without a camera person, you did well enough. Thanks for sharing this fix.

    • @ChronCrew
      @ChronCrew  4 ปีที่แล้ว

      Absolutely, thank you for the comment

  • @ptzish
    @ptzish 4 ปีที่แล้ว +4

    Great video. Thanks for the help. This goes to show that you should never get the beige interior either. It's always scuffed up and dirty looking.

  • @imlevitating___
    @imlevitating___ 5 หลายเดือนก่อน +1

    I had this issue since the moment I bought by S8 D4. Went ahead and applied your strategy and the noise was reduced but ended up disconnecting it lol Its not a big deal to have this feature and now I have peace :)

  • @danielnache9712
    @danielnache9712 4 ปีที่แล้ว +3

    Great video! I just bought an Audi A8 2013 and unfortunately it came with this weird sound,but thanks to your video I found the cause of the problem. I found the motor for cheap and I will replace it,thanks a lot! :)

  • @kontrolenthusiast1099
    @kontrolenthusiast1099 4 ปีที่แล้ว +1

    Disconnected the deflector motor with assist from your video, five minutes total, you Rock! Now on to Sunroof leak...

    • @ChronCrew
      @ChronCrew  4 ปีที่แล้ว

      Awesome! So glad i could help! Be sure to like and subscribe to help boost my channel.

  • @jetknight5051
    @jetknight5051 5 ปีที่แล้ว +3

    UPDATE YOUR IDEA WORKED PERFECTLY. ... THANKS FOR SHARING YOUR BRILLIANT IDEA. ON VIDEO. ..

  • @michaelbrown-ws1pc
    @michaelbrown-ws1pc ปีที่แล้ว +1

    Was able to unplug the module rather easily. Removed that one screw in the sunglasses holder, pulled housing down and disconnected the module. Fumbled putting housing back due to section connected to the windshield fell off. Wasn't expecting that and virtually needed 3 hands to put it back. Got it done in less than 12 minutes. I would suggest putting a piece of tape on the portion close to the windshield to hold it in place before disassembly

  • @beltonhaig8493
    @beltonhaig8493 6 ปีที่แล้ว +3

    BRILLIANT!! EXCELLENT VIDEO!!! thanks for the solution!!! Have owned my A8L for 5 years and I've been wondering where that sound came from and how to resolve it, now I know how...THANKS AGAIN!!!

    • @ChronCrew
      @ChronCrew  6 ปีที่แล้ว

      Belton Haig, So glad I could help!

  • @Crazy8video
    @Crazy8video 6 ปีที่แล้ว +4

    Hey thanks for posting the video! I have a 2008 A8L with the same issue and did not know wth it was until now. Thanks a million!!!

    • @ChronCrew
      @ChronCrew  6 ปีที่แล้ว

      Henry Trinh. You bet, glad I could help

  • @andersljung1791
    @andersljung1791 6 ปีที่แล้ว +1

    Worked perfectly! The noise went from really annoying to a soft whisper, which you only hear when the engine isn't running. So thanks a lot! :)

    • @ChronCrew
      @ChronCrew  6 ปีที่แล้ว

      Anders Ljung great! Glad I could help

  • @DjT6nuRoostalu
    @DjT6nuRoostalu 5 ปีที่แล้ว +3

    Thnx, i did it myself too and it works!

  • @helgekroger2057
    @helgekroger2057 5 ปีที่แล้ว +1

    Thank you very much to share this video. After 10 miuntes the nasty noise was history and for an A 8 very cheap.

  • @TheBluecrew13
    @TheBluecrew13 6 ปีที่แล้ว +2

    The crazy part is brought my A8 to Audi Tampa and they were clueless about what the exact problem was. I will most definitely disconnect that motor. Thanks...

    • @ChronCrew
      @ChronCrew  6 ปีที่แล้ว

      Shawn Blue , glad I could help. Sometimes the dealership guys tend to think too hard an miss the easy stuff.

  • @RaRahGully
    @RaRahGully 4 ปีที่แล้ว +6

    I so needed this fix. Thank you a ton, will try it

    • @Erv704
      @Erv704 2 ปีที่แล้ว +1

      any luck with this fix?

    • @RaRahGully
      @RaRahGully 2 ปีที่แล้ว

      @@Erv704 yessir. Initially the moonroof would not close on its own after removing that wind sensor. But after adding some wd40 to the track, it closed smoothly

  • @BrainXTV
    @BrainXTV 2 ปีที่แล้ว +1

    Great video . Thank you.

  • @mursikmursik5310
    @mursikmursik5310 3 ปีที่แล้ว +1

    Spasibooo, perfekt

  • @Beth-El
    @Beth-El 6 ปีที่แล้ว

    Cool thanks for the advice.

  • @LeTRANSPORTEUR69
    @LeTRANSPORTEUR69 3 ปีที่แล้ว +1

    Thank you

  • @eldadshomron544
    @eldadshomron544 4 ปีที่แล้ว +1

    i have an audi s8 had the same annoying problem..saw the video and said to myself fuck it i'm going to give it a try and it worked like a charm

  • @tselemental2249
    @tselemental2249 5 ปีที่แล้ว +1

    Can anybody help me because I have a 2004 and there are no torx screws after I pull the light out and idk how to get the rest off? And ideas?

  • @johnvigil8440
    @johnvigil8440 4 ปีที่แล้ว +1

    Thought it was pretty ghetto till you said 300$! 😂

  • @edouardfleurant879
    @edouardfleurant879 5 ปีที่แล้ว

    Does anybody no the problem the car sign on the top also keeps on blinking

  • @lawrencemercieca
    @lawrencemercieca 3 ปีที่แล้ว +1

    Pulled it off in the d4 version
    1 bolt and a gentle pull to get the switches off
    Shove a plastic fork inbetween the car and the motor
    Can’t test it without taking for a drive but if it works, I’m telling everybody that my once flagship car has literally been repaired by a plastic fork 😂

  • @edouardfleurant879
    @edouardfleurant879 5 ปีที่แล้ว

    I have a 2006 Audi A8 water got into the cup holder and now the lights in the interior keeps on coming on and of by it’s self

    • @ChronCrew
      @ChronCrew  5 ปีที่แล้ว

      The mmi control board in front of the cup holders has likely been shorted due to the water leak

  • @philliphanley4139
    @philliphanley4139 5 ปีที่แล้ว

    Thanks, Now how do I get rid of foggy head lights?

    • @ChronCrew
      @ChronCrew  5 ปีที่แล้ว

      Phillip Hanley . Rubbing compound on a micro fiber cloth, rub vigorously and then wipe clean!

    • @fourringking
      @fourringking 5 ปีที่แล้ว

      Clean with invisible glass.
      600 grit wet/dry sandpaper spray with water while sanding in a circular pattern.
      900 grit wet/ dry sandpaper same
      1200 grit wet/ dry sandpaper same
      Headlight buff compound with micro fiber towel. Rub on wipe off.
      Clean with invisible glass.
      Apply wax let dry buff off wth micro fiber towel.

  • @erceferuzgarcoskun5482
    @erceferuzgarcoskun5482 2 ปีที่แล้ว

    What is 1 2 3 buttons for at the roof?

    • @ChronCrew
      @ChronCrew  2 ปีที่แล้ว

      Garage door opener

  • @zlatanzifovskijr4576
    @zlatanzifovskijr4576 2 ปีที่แล้ว +1

    Hey question a while back my sunroof would not work at all when operating the switch and the upper lights do not come on when pressing them any ideas?

    • @ChronCrew
      @ChronCrew  2 ปีที่แล้ว

      Likely a problem with power feed to the upper console considering the lights also do not operate, i would look into the possibility of a blown fuse.

    • @zlatanzifovskijr4576
      @zlatanzifovskijr4576 2 ปีที่แล้ว

      @@ChronCrew the lights work when the door opens but not when I press the buttons 😂

    • @ChronCrew
      @ChronCrew  2 ปีที่แล้ว

      @@zlatanzifovskijr4576 try removing the upper console and cleaning the circuits/contacts/board very thoroughly with rubbing alcohol

    • @zlatanzifovskijr4576
      @zlatanzifovskijr4576 2 ปีที่แล้ว

      @@ChronCrew I already tried it with wd40’s green electrical cleaner unless you think alcohol makes a difference I’ll try

    • @ChronCrew
      @ChronCrew  2 ปีที่แล้ว

      @@zlatanzifovskijr4576 i dont have any personal experience with the wd40 cleaner, id assume that it probably has similar properties to rubbing alcohol tho

  • @jetknight5051
    @jetknight5051 5 ปีที่แล้ว +1

    $300 I rather use a 1cent folded paper it seems to to do the job. .
    Mine does that same nosie it's annoying. .