Thanks! To install the metal plate at the top you'll just need to make some small "L" brackets to bolt to those two holes :) They're not quite right angles, so you might have to open them up 5-10 degrees. Does that answer your question? I'm also working on a kit for this, so stay tuned if you'd like an easier DIY.
i would love to but i just don’t have time right now! Eventually i’d like to sell them directly, so i’ll let everyone know on this video once they launch
Hey bro, greetings from Romania. You have an awesome channel, keep up the good work even if you don't have a lot of subscribers now. I feel that this will blow up in a few years, cause there are a lot of E36 owners looking for this kind of content which is not really available elsewhere. I really like the way you're keeping it within a budget but still doing nice things. Watched a few videos and the first one was with the vanos repair kit and I plan on doing mine too. I ordered the Camshaft sensor OEM cause I got the error for it. First I bought an aftermarket one from Dephi but it just made it worse. Pro tip: if you wanna buy any sensor on this car, buy it OEM, even if it's 5 times more expensive. The issue with my car is that it's running perfectly fine when cold but when it gets hot it loses all the power until 4000rpm. I hope it will get better when I get the new OEM sensor. And speaking of Vanos, I'm not sure that I'll do it by my own as I do not have a garage and the tools that you have, and the quote for me would be around 200euro+the kit. Also, went to the Beisan website to order the kit but the shipping it's more expensive than the parts which is insane. Just started the project a month ago and I've done a lot of nice things, I want to keep it up. Mine's a M50B20 Sedan, as I do have another E88 which is a cabrio and I was not as brave as you to buy a 30year old ish cabrio. Anyhow, I subscribed and I'd be glad to buy a kit of V Braces for my E36. BTW, what's your engine? I suppose M52B28?
That’s so nice to hear!! Would love to create a kit, just working on growing the channel for the next month or two so that we can get a large enough group-buy to get these manufactured - that’ll keep it from being crazy expensive for buyers, I want it to be affordable for any e36 owner.
Nice job. Gives Dory a more imposing look from the front. Lighting was great on the garage / driveway too.. new camera? Any plans for increased induction noise?
Thanks so much - same camera, but new lens that stops down to f2 so LOTS more light let in + much better optics. And on the induction front, I’ve been on the hunt for a carbon dinan intake for a while so time will tell …
Dude that’s great news and absolutely i would. It would require drilling two holes in your bumper support, but otherwise would bolt right up. I’ll see what i can do…
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Looks awesome man! Glad I found your channel, and honestly watching your car come together is a big inspiration for my e36 project!
sick!! Thank you so much, glad you’re here. also glad to hear you have an E36 project, keeping them on the road is important work :)
I did this on my E46 330i, I wrapped mine in yellow. People trip out on it all the time LOL I love it
people really love the look!
i got an e36 m3 and I love your videos like LOVE them bc they help me so much bro! keep up the good work. just subbed
thanks bro!! Congrats on the M3 i’m jealous!
Looks great what you're doing my friend but I want a way to install the metal plate this way

Thanks! To install the metal plate at the top you'll just need to make some small "L" brackets to bolt to those two holes :) They're not quite right angles, so you might have to open them up 5-10 degrees. Does that answer your question?
I'm also working on a kit for this, so stay tuned if you'd like an easier DIY.
looks real good! would you make another? I would like buy one custom
i would love to but i just don’t have time right now! Eventually i’d like to sell them directly, so i’ll let everyone know on this video once they launch
Hey bro, greetings from Romania. You have an awesome channel, keep up the good work even if you don't have a lot of subscribers now. I feel that this will blow up in a few years, cause there are a lot of E36 owners looking for this kind of content which is not really available elsewhere. I really like the way you're keeping it within a budget but still doing nice things. Watched a few videos and the first one was with the vanos repair kit and I plan on doing mine too. I ordered the Camshaft sensor OEM cause I got the error for it. First I bought an aftermarket one from Dephi but it just made it worse. Pro tip: if you wanna buy any sensor on this car, buy it OEM, even if it's 5 times more expensive. The issue with my car is that it's running perfectly fine when cold but when it gets hot it loses all the power until 4000rpm. I hope it will get better when I get the new OEM sensor. And speaking of Vanos, I'm not sure that I'll do it by my own as I do not have a garage and the tools that you have, and the quote for me would be around 200euro+the kit. Also, went to the Beisan website to order the kit but the shipping it's more expensive than the parts which is insane. Just started the project a month ago and I've done a lot of nice things, I want to keep it up. Mine's a M50B20 Sedan, as I do have another E88 which is a cabrio and I was not as brave as you to buy a 30year old ish cabrio. Anyhow, I subscribed and I'd be glad to buy a kit of V Braces for my E36. BTW, what's your engine? I suppose M52B28?
thank you for the kind words bro!! Completely agreed on OEM sensors, it’s a big expense but absolutely worth it.
I would love to buy a set.
i’m working on figuring out production - if there’s enough interest i could totally put out a kit!!
Looks very nice. I would buy 2 kits if you ever plan to sell a kit.
That’s so nice to hear!! Would love to create a kit, just working on growing the channel for the next month or two so that we can get a large enough group-buy to get these manufactured - that’ll keep it from being crazy expensive for buyers, I want it to be affordable for any e36 owner.
Nice job. Gives Dory a more imposing look from the front. Lighting was great on the garage / driveway too.. new camera? Any plans for increased induction noise?
Thanks so much - same camera, but new lens that stops down to f2 so LOTS more light let in + much better optics. And on the induction front, I’ve been on the hunt for a carbon dinan intake for a while so time will tell …
@@logan-taylor ah fast lens. Worth every penny
hey logan are you currently driving dory ? or do you have her stored away from the seattle cold 😭
she’s driving around every day like a champ, I just make sure to let her warm up - some new mods coming up too!
U should paint them red or yellow
I'd put these on my E36. Would you make more brackets and v-braces to sell?
Dude that’s great news and absolutely i would. It would require drilling two holes in your bumper support, but otherwise would bolt right up. I’ll see what i can do…
U know what I am going to sue you because I do see them a lot now🤣
i’m lawyering up for the lawsuit, thanks for the heads up :)
Ima do this to my car as I’ve always loved the look of the brace on the newer cars, suck vid
Thanks man - totally worth it and totally reversible if you ever decide you don’t like it.
I need you to make this a kit or sell me one !!!
ahaha i drew out some plans a while back and just haven’t sorted out my manufacturing process!! Could definitely be a cool product
I'll ask the obvious question, WHY?
for giggles
@@logan-taylor - fair enough, can't have too many giggles
so true my friend