ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
DIY | Snow Machine - How To Make Snow at Home
ฝัง
- เผยแพร่เมื่อ 11 ม.ค. 2020
- #snowmachine #snow #homemade
SUBSCRIBE ►
/ @nighteffects6778
FIND ME ON:
Instagram | / nighteffectsofficial
Twitter | / nighteffectsyt
Facebook | / nighteffectsofficial
PAYPAL | paypal.me/Nigh...
DIY | Snow Machine - How To Make Snow at Home
In this video i will show you how to make snow machine/snow at home very simple.
You will need some 3/4 inch or less water pipes, compressor and water flow trough garden hose at least 2 bars.
The air pressure from the compressor pushes and cools the water droplets which are then further frozen in the air. Outside air temp must be at least -2°C and under 70 percent humidity.
The lower the air temp, the better the snow machine works.
If you have any more complicated questions you can write me on my email, you can find my email in my yt channel.
Thanks for Watching !
Neighbors must love that
I don't have any neighbors 😊
Apparently not any more after you invented “the snow machine” 😆 just kidding man. Good video.
What neighbours
your contributions to the thread tape industry will not go un-noticed
With this kind of work with air pressure, water pressure, cold temperatures it is important to use more teflon tape. This is not plumbing, this is snow science !😃
Just a hint, you only need about 2 wraps of the Teflon tape no more.
Exactly!! He uses a LOT!!
My husband's same reaction.
Mine : I dont want to ever have to come back to this. I want it to look like f glued forever. 😂
It's cheap who cares
40 years as a plumber, 5 wraps works best.
That was the first thing I noticed he use so much tape couldn't even get the fitting on
Plumber tip: flip the wrench the other way around and it wont slip as easily and rather just grips harder. The pliers should be pointing towards the direction of force.
A rabbit hole worth going down. Glad I found this video. Awesome job
More hang time for the snow so you get a nice flowing curtain. Then do a sleeve test. The more bounce the better quality of snow.
But over all I love it dude keep it up.
I make snow at alot of resort
For the first green Christmas ever where I live this is a life saver
This worked awesome picked up the parts made it works great need about 2 rolls of the tape but it works well I used 3/4 inch peices
Great beginner idea. But I saw you use the channel locks backwards. The teeth on channel locks go one way so it grips the piece you are tightening or loosening. Try using it both ways. You will see what I mean.
White Christmas for mom. Love it.
Perfect way to get revenge on your neighbor during winter, just point it at their driveway while they're at work and viola!
That’s awesome! Can’t make a snowman, but you can tell Elsa was there. Thanks for the video
What was the weather when you started making snow other than the temp? Relative Humidity, Dew Point, Wind?
Great snow lance, copied it and it works for me. Thanks, cool video. Are you going to make a video with the snow cannon again this year? Greetings from the Austrian Alps
Do you need it in Alps?)
@@nkolchenko Yes but only for my own garden
Is there anyway I could get a parts list on this, Thanks
yes that would be nice
Late reply, but he used 3/4 inch plumbing pipe to create a T:
Looks like at 0:26
(1) 3/4" T
(2) 3"section of 3/4" pipe,
(2) 4" or 5" section of 3/4" pipe.
(2) 3/4" shut off valves.
1 solid 3/4 endcap(the one he drilled in)
Plumbers tape or dope,
Finally you'll need your air and water adapters, looks like he has one in the package called molan? I think that's his air connection, and I guess they probably make a garden hose adapter to fit the 3/4 pipe ends.
The pipe lengths probably don't matter much as long as you have room to work the valves..
Hope this helps.
What type of fitting are you using to connect your water hose to galvanized pipe? My hoses won’t connect to pipe because thread type is different.
Now I just need the weather to be cold in Texas 🤣🤣🤣
Man, TY this was awesome
Sure are a lot of critics in the comments. It would help if you stated the rated cfm of the air compressor.
What are the lenghts of the galvanized piping used?
Woowwwww,, Super
How many bar of air do you need at least?
howd you get the water/air to come out at a consistent pressure bc whenever i do it it alternates between water and then the fizz-air-water? ive adjusted the pressure a bunch but my air compressor keeps fluctuating by a few psi
You have to adjust the exact air and water flow trough the nozzle. And the nozzle must be the right size.
Did your compressor fill with water?
Nice work man but save some Teflon tape for us. JK
why do you use such large fittings just use 1/4 in it works fine.
That's definitely snow! 💯👍👍
great !!
what does a water nozzle have to be?
How much air pressure did you use for this?
for me approximately 50ish. hoses apparently can be between 40 and 80 on standard houses
Can you provide a parts list please?
Good thing Teflon tape is pretty cheap. LOL.
Ronald mc donald shoes? Lol
What PSI air compressor did you use and gas or electric? Thanks!!!
Electric, 145psi. 💪
Thanks
This hooked to garden hose or pressure washer ?
Well there goes the water bill
Probably makes more sense if you’re on a well or you can pump it from a pond or cistern…this place looks like rural farm land so I doubt he’s on “city water”
Looks great! How did you pull this off without a pressure washer to atomize the water?
He has a compressore connected to it
Can we make snow at between the temp of 15 degrees Celsius to minus 1 degree Celsius?
Unfortunately no 😃
@@nighteffects6778 u should make it happen then get lost if u can’t
Why doesnt water in a pressure washer freeze? Same setup i guess
could i get a list of what you used?
wow-
Would a check valve be necessary?
Can you get air in your water line? Or vice versa
Update. Tried it. It’s impossible to be consistent. It has to be below 32 but then your hoses freeze so does the galvanized pipe. It did create a bit but froze
i dont know what that is but you can definitely get water in your air line- source: i just did this and my air compressor almost positively has water in it
Yeah a check valve on both wouldn't hurt it seems
@@AndrewLuhring a check valve allows flow to go through a pipe one way only. It should prevent air or water going in to where it isn't meant to.
You would have the pump/charge the water though
Or venturi before pressure is added
How cold does it have to be for it to make snow? any chance it may create snow at 0 to 5 degrees?
You can make snow but it is hard, there are some factors behind air temperatures, which the main factor is air humidity. If the temperature is 0°c you can make a snow if air humidity is lower than 40%. But this will be very very wet snow. 💪
What is the temp around where this is happening. Is there an ideal temp!
Under 28 degrees Fahrenheit
Ideal temp is -5°C
i just did it in -20C and it worked mostly fine
And that was the beginning of the great Teflon tape shortage........
Galvanized?
Couple more rounds o pipe sealant would help lol and you could also get your fittings tighter if you used your tools properly
i did the same and i have a problem that my water refuses to disperse what would be wrong????
Use a prefessional nozzle
How cold do it have to be outside to make this work?
Usually 28 degrees but search up the wet bulb temp if your gonna make snow
Generally speaking it needs to be much colder with a set up like this. regular tap/city water is much warmer than "snowmaking" water. also your compressor air will be warm as well most of this can be mitigated by having your nozzle as high as possible, which gives the water time to freeze as it falls to the ground
So how big of a compressor would I need to do this?
Regular small compressor os enough. You just need to cool it with some fan
mines pretty normal and it works more or less.
It's more like frozen ice than snow. Dunno how successful this video is.
It is snow. They are doing the same at ski resorts, just with a lot more nozzles and a little bit different princip. Check my 2nd video of snow making at my channel. Thanks.
@@nighteffects6778 I honesty didn't know. Looks like fun
sir,
what is temperature of water is it cold warm or hot ?
Thanks for video
Cold. Why would it be hot if you want to freeze it as soon as possible ?
@@nighteffects6778 well hot water actually freezes faster than cold
@@samlauer8855 that's only in a freezer...
Jesus the Teflon
is it real???
Slovenia?
Yes
Here in Canada we don’t need fake snow we got real snow
You should apologize… your nationality compels it. Tell us again how great snow is when you’re shoveling at 4am for the 12th time this year. We’re not dumb, the magical effect wears off around the 5th day of shoveling and we all know that.
That works best if it's minus 20 degrees Fahrenheit.........
is your air compressor inside or outside
Doesn' matter. Sometimes in sometimes ooutside.
How to drive your neighbours nuts!
My neighbors called the police on me for a noise violation, my water bill was $462, and I burned up my air compressor. Then I told all the neighbor kids they had to pay to play and the parents got mad at me for not letting them play in my snow.
Lies. Lol. But you're right. This is pretty impractical.
You must be a blast at parties...
wich compressor do you use
Small 20l compressor.
Give it more hang Time and more water bud
Man wrapped half a roll of Teflon tape on there
Don't need so much Teflon tape. just a couple of turns.
I leaks if i don't use that much tape
3 times around is plenty holy shit man
Форсунка будет обмерзать, надо подогрев...
Does it feel like real snow?
It is like ski resort snow
19 wraps is fine lol
But doesn t the water get in the compressed Air machine?
No, pressure of the compressor is higher than water so water can't go to Air machine..
@@nighteffects6778 okay thank you! i was worried water can go in the machine
Only water use tell me any gas and liquid use
Water and air pressure.. and more than -3 °C..
@@nighteffects6778 How do I lower the temperature of the environment?
My area environment temperature 39dgree Celsius normal and 45 degree maximum temperature so tell me how do i low in my area temperature deacrease
@@adellsady2164 dude u can t make snow If there are 30° outside
If hey can do it, what makes u think the government's haven't ...? Think a little.
Did you use a pressure washer for this
Yes
I live in Florida you think it will work down here
@@mudlifejunkiepr3937 as long as it is 28 degrees outside
Wait wait wait 🤔🤔 a damn min all that Teflon for what. 🤫🤫🤫🤫🤫🤫Now we know where the Company is taking the loss. It’s in Teflon tape, from one guy 🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️ there goes the Christmas bonus
With this kind of work with air pressure, water pressure, cold temperatures it is important to use more teflon tape. This is not plumbing, this is snow science !😃
Would I need 5 SCFM @ 90 PSI or can I use something lower
Standard 8bar, 230l/mim flow compressor is just fine. So standard compressor 💪
And I wouldn't use a compressor I would use a pressure washer
With the way you use that Teflon and in the wrong direction you are definitely not a plumber and applying entirely too much seriously