Official manufacturer of XPS ★ www.penoplex.ru/ ★ Here you can order this www.etsy.com/listing/868716607 S A L E ★ U.S. Route 66 www.etsy.com/listing/868408262
The homemade wave mold is absolutely bonkers. I hope you were able to get all off in one piece without any tears (it sure looked like you did)! I can imagine it’ll make future crazy wave dioramas a heck of alot easier!
Fabrication Pro Tip: They could have made a reusable mold by making it 2 part. But its a bit of a long process. First youd use WED clay and basically a cheese cutting string (we use guitar strings, the tool looks like a garrote wire used to choke people) to make uniformly thick slabs and cover the whole thing with them. This makes a gap they youll fill with silicon later. After its covered in the clay, cover it in fiberglass. Make some ribs with thin strips of clay to lock the soft inner 'face tool' into the fiberglass later too. Once the fiberglass is cured, peel out the part and the clay (DO NOT DAMAGE THE PART YET!!!) and clean up all the clay and surfaces, silicon hates other stuff as it cures. Then put the hard outer jacket over the part (BTW this is a million times easier if you make a fully enclosed mold. you basically do all these steps twice front and back) and pour your silicon into the gap where the clay was, and wait for it to kick. Another Pro-Tip: forget the paraffin and hexane silicon release, Dawn dish soap works better and is WAY cheaper, just watch out for brush strokes leaving surface textures. Then once its kicked remove the hard jacket, then peel off the soft jacket! TADA! Now you have a mold of something that might contain under cuts which would lock up a hard mold like fiberglass and bondo, but peels right out of the soft silicon jacket! Just dont damage the silicon in the fine detail places. Youll never be be abel to repair it.....
This channel is amazing and you can see someone who is so genuinely talented in this craft, everything is done so well and you can just feel the genuine love the creator has for creating lol awesome stuff!!
And then out of the massive wave comes the equally as massive Spinosaurus as it lets out a mighty screech and with a deep menacing look in its eyes and booming voice it says: “Bonjour” as it swallows the ship and all the men aboard and dives deep into the ocean as the massive wave crashes down and the waters calm like nothing was ever there.
Ah, it's this time of year again where TH-cam recommends me these types of videos of talented people being successful at something because it knows at times I'm some lazy ass that just sits at ease, soaking in hours onto TH-cam because there isn't any other thing to do. Thanks again, TH-cam.
These self destructive comments really don’t help anyone, it can really bring down the artist and just make yourself feel worse. There’s tonnes of online classes and free tutorials on TH-cam to teach you anything you want to learn, it’s just a matter of accepting you won’t be good at it at first and to keep trying to get to where you want to be. No artist is ever fully satisfied with their work, no matter how much we tell them we love it. Stop being hard on yourself
@@Voiidpriince Properly, I wasn't trying to be negative, but I understand where you're getting at. Anyone can ascertain most things if they wanted to, it's all about promptly putting the time and concerted effort into it. We all designate what we want to covet as a part of our social lives and we also choose when to be lazy. But yeah, I get what you're remarking so my bad for naturally making it look like I was intentionally trying to be negative.
This is really good, at first I thought the spinosaurus looked to much like it had land based colours but I then realised you would not be able to see it in the water. The only other thing is the pupil was looking up rather than at the boat, that small change would have made this perfect
@@osa313 he still painted it which is difficult and 3d printing is not easy either. What you just said is like the equivalent of "digital art is not real art"
@@epiccheeseman42069 I meant you are talking about anxiety i believe it is would be way more stressfull if he had sculpted it! The advantage of 3D printings you know is in my opinion he can rely on it if anything goes wrong. But of course the paint job and aplication is great
@@epiccheeseman42069 as somebody who does both digital and material art (painting) I will say that there is a significant difference in my attachment to each work. When I make digital art, I can easily reverse mistakes, make copies in case I want to try something out and don’t like it, and generally feel safe in the knowledge that I can easily reproduce something. With my paintings, if I have something good and end up overworking it or changing something and don’t like the result, there’s no going back in time. Sure, I can try to replicate what I had done, but it’ll never be quite the same and I don’t have layers I can delete or an undo button to go back and see what I did. Most significantly though is the pain I feel about the wasted materials, like the canvas that will sag under the weight of all the layers of paint if I keep working at it and the amount of expensive ass paint I just wasted doing that. Digital art is different in that you have the investment in the technology, then you can create for free without thought of wasted materials. That’s what makes my paintings feel more precious 🤷🏼♀️
I am a diorama maker and i must say Damm lol.. you have out done yourself. The idea brilliant , execution was flawless, the detail is razor sharp. Even the lighting, temperature of the colors just truly amazing. The Heroic cut through the dino then assemble was insane. When you think it could not get any better, the calming melody is a touch from the heavens. Very well played my friend.
This Music is BEAUT! Could watch these all day with that kinda music! The body underwater looks awesome!! Probs my fave part! Its awesome seeing how these are made....thankyou
This is sooooooooo amazing! I would have loved to see dripping water details perhaps in the mouth and splashes where he's bursting out of the water because I saw you do that in other videos and found those details next level! I'm seriously amazed by this and cant even process how talented you are!!!!!!!!!
Очень здорово вышло :D Золотые руки во всех смыслах) Люблю подобные видео и вот что заметил, девушки куда более элегантно и аккуратно делают такие диорамы ;)
I watched half of this video with my mouth wide open, and the other half rewinding to make sure I actually saw what I just saw..... Incredible skills, talent and presentation! Take a bow!
Absolutely stunning results after that process - I would never have realized the degree of difficulty until having watched the entire process it takes to get this amazing finish!
Que importante poseer las habilidades y por supuesto herramientas y accesorios para realizar un trabajo tan hermoso como este! Decir Felicitaciones se queda corto, pero FELICITACIONES Minibricks!! Los pequeños detalles hacen las grandes diferencias y usted logra hipnotizarnos con cada uno de ellos!! Un abrazo Minibricks !!!😘😊
Beautiful! Do you think you could do some water streams falling off the face and mouth with maybe fishing line and resin? Because something like that would have just given this a little bit more motion. The foam looked incredible!
The shape of this skull is unmistakable! :D You used Gojira as a base template and prolonged his snout, adding the sail as well, didn't ya? Even with all of that - great freakin' job! Enjoyed watching this!
I know it’s not a Da Vinci, but this is one of the most beautiful and awe inspiring pieces of art I’ve ever seen. It makes me so curious about the oceans and what might exist. Just so beautifully done 💙💙💙
Don't count yourself short, toots, you're not bad looking yourself 😘 [farts loud] Sorry, had beans and cabbage for dinner because I'm poor. So if we hook up, baby, you're gonna have to break out the dough when we go to dinner and to WWE events. Damn straight, you's better be into WWE, all my women are!!! ❤️
This is amazing, do you think you could do a Giant Manta Ray? that is like my favorite sea creature and I would love to see how you would present them.
These types of videos are SO much more satisfying and interesting than watching videos of people clacking and slurping around making food in their carefully staged kitchens. These types of videos are like Bob Ross in the modern era. With monsters, I mean.
I have watched every video in ur channel, its an amazing channel and we learned some techniques from u, thank you for everything and could you please show ur face just to know who is making this ❤️
Someone PLEASE give this man (or woman) a MEDAL! If I had even a quarter of his creativity, I wouldn't still be living with my mom. JK on that last part but still.
This video was great, then they introduced a cast, and silicone lost me then it made sense then lost me with the potato on a plank lol Absolutely amazing video I’m glad that there are so many people out there with these talents for others to get inspired by thank you for the work you’ve done keep it up!
Official manufacturer of XPS ★ www.penoplex.ru/
★ Here you can order this www.etsy.com/listing/868716607
S A L E
★ U.S. Route 66 www.etsy.com/listing/868408262
Lindo top 😊👍
Beautiful top 😊👍
Hey where's the one with Godzilla.
You recognize skills when work is good
You recognize mastery when you look at this video.
@@kelvenmathias2mostraranima144 @@
Where can one get the Decor X10 and for how much ???
What is this craziness!?!
Beaver actually commented lol and I was early to comment on his comment. Pretty pog.
Nice thegamingbeaver actually commented
Hmm
Omg this tgb I love you ❤️❤️❤️❤️❤️
Beaver???? What are you doing here lol
The homemade wave mold is absolutely bonkers. I hope you were able to get all off in one piece without any tears (it sure looked like you did)! I can imagine it’ll make future crazy wave dioramas a heck of alot easier!
Fabrication Pro Tip: They could have made a reusable mold by making it 2 part. But its a bit of a long process. First youd use WED clay and basically a cheese cutting string (we use guitar strings, the tool looks like a garrote wire used to choke people) to make uniformly thick slabs and cover the whole thing with them. This makes a gap they youll fill with silicon later. After its covered in the clay, cover it in fiberglass. Make some ribs with thin strips of clay to lock the soft inner 'face tool' into the fiberglass later too. Once the fiberglass is cured, peel out the part and the clay (DO NOT DAMAGE THE PART YET!!!) and clean up all the clay and surfaces, silicon hates other stuff as it cures. Then put the hard outer jacket over the part (BTW this is a million times easier if you make a fully enclosed mold. you basically do all these steps twice front and back) and pour your silicon into the gap where the clay was, and wait for it to kick. Another Pro-Tip: forget the paraffin and hexane silicon release, Dawn dish soap works better and is WAY cheaper, just watch out for brush strokes leaving surface textures. Then once its kicked remove the hard jacket, then peel off the soft jacket! TADA! Now you have a mold of something that might contain under cuts which would lock up a hard mold like fiberglass and bondo, but peels right out of the soft silicon jacket! Just dont damage the silicon in the fine detail places. Youll never be be abel to repair it.....
Even without Spinosaurus, their death was inevitable.
I mean. Look at the wave man
The Spinosaurus probably brought the wave with them, scary
Yep, that's what I was thinking when he first positioned the boat. "Oh damn, a huge, giant wave AND a freakin' dinosaur?? What a way to go."
So... joe how did you leave the world and come up to the heavens?
Oh just a wave and a 100 meter dinosaur.
... yeah right
No I’m serious!
@@popqrn4759 who is joe
@@albert.33 Don’t ask ridiculous questions
The level of detail in all of your projects is just insane!
Very nice idea and execution. Congratulations 👍👍👍
В попочку
Indeed!!! 😀👌👌👌
It's gotcilla,seriously?
DUDE 8:08 ITS LITERALLY AN EXECUTION
@Shane Devine me too
Not only is this amazing to watch but why is this insanely calming??
Dino go rawr 🦖
It's a shame TH-cam isn't recommending your stuff
Edit: alright this didn't aged well, good job yt
But I just got this video recommended to me.
I just got this recommended xD
Now it is 👍
But It was in my recommendations
ayy got in my recommendations lol dont know why but Ill watch it anyway
This channel is amazing and you can see someone who is so genuinely talented in this craft, everything is done so well and you can just feel the genuine love the creator has for creating lol awesome stuff!!
i wish there was a teaching class like this. I would definitely sign up
I would to that sound really fun and cool 😎
Sound*
Sounds* sorry autocorrect:/
@@claubausenwein9276 you can edit your replies lol
teach yourself, watch vids and muck around with it
This is one of the most impressive displays of creativity, attention to detail and execution I've every seen!
Go on his channel and tap the sea monster in a pool one see that :)
Sailors be like: "Holy crap, giant wave headed towards us! nothing can be worse than this."
Little did they know...
Spinosaurus:are you sure about that?
Spinosaurus: Im bout to end this man's whole career
And then out of the massive wave comes the equally as massive Spinosaurus as it lets out a mighty screech and with a deep menacing look in its eyes and booming voice it says: “Bonjour” as it swallows the ship and all the men aboard and dives deep into the ocean as the massive wave crashes down and the waters calm like nothing was ever there.
@@Soybean493 HELP THE BONJOUR LMAO
This takes “Needing a bigger boat!” to a whole new level. lol Very well done!
XD VERY TRUE!!!!!!
“reference”
Gonna need a battleship
@@Huggle_Puff A BIG battleship. Preferably equipped with missles or something...
Each one of your pieces are just pure dedication ! Nice job, very pleasant to watch people knowing what they are doing
It baffles me how talented people can be. It’s sooo inspiring.
Ah, it's this time of year again where TH-cam recommends me these types of videos of talented people being successful at something because it knows at times I'm some lazy ass that just sits at ease, soaking in hours onto TH-cam because there isn't any other thing to do. Thanks again, TH-cam.
These self destructive comments really don’t help anyone, it can really bring down the artist and just make yourself feel worse.
There’s tonnes of online classes and free tutorials on TH-cam to teach you anything you want to learn, it’s just a matter of accepting you won’t be good at it at first and to keep trying to get to where you want to be. No artist is ever fully satisfied with their work, no matter how much we tell them we love it. Stop being hard on yourself
@@Voiidpriince Properly, I wasn't trying to be negative, but I understand where you're getting at. Anyone can ascertain most things if they wanted to, it's all about promptly putting the time and concerted effort into it. We all designate what we want to covet as a part of our social lives and we also choose when to be lazy. But yeah, I get what you're remarking so my bad for naturally making it look like I was intentionally trying to be negative.
I watch TH-cam during online school 🙃
Build something like this and get on TH-cam
@@ericjohnson8001 a career has been set in motion 😎
This is really good, at first I thought the spinosaurus looked to much like it had land based colours but I then realised you would not be able to see it in the water. The only other thing is the pupil was looking up rather than at the boat, that small change would have made this perfect
spectacular!
🇮🇩 Hi, I'm one of your old subscribers from Indonesia. And I missed your old content like the dragon paper mache arts 🙂
@@MarshaNPILoveCanada Yes, I am still working, just not as much. Your pieces are amazing! And nice job with the videos. I have subscribed.
Est trop bien ce que je tu fais
Tu es 🇨🇵 ou pas
Vous êtes 🇮🇩.
I cannot express how well executed this project was!!!!!! Waaaaaaay Coool!
I can't imagine the anxiety you felt while cutting up the spinosaurus
Exactly! XD
I was like: "What??? NOOOO!!!"
It's not like he made it, it's 3d printed
@@osa313 he still painted it which is difficult and 3d printing is not easy either. What you just said is like the equivalent of "digital art is not real art"
@@epiccheeseman42069 I meant you are talking about anxiety i believe it is would be way more stressfull if he had sculpted it! The advantage of 3D printings you know is in my opinion he can rely on it if anything goes wrong. But of course the paint job and aplication is great
@@epiccheeseman42069 as somebody who does both digital and material art (painting) I will say that there is a significant difference in my attachment to each work. When I make digital art, I can easily reverse mistakes, make copies in case I want to try something out and don’t like it, and generally feel safe in the knowledge that I can easily reproduce something. With my paintings, if I have something good and end up overworking it or changing something and don’t like the result, there’s no going back in time. Sure, I can try to replicate what I had done, but it’ll never be quite the same and I don’t have layers I can delete or an undo button to go back and see what I did. Most significantly though is the pain I feel about the wasted materials, like the canvas that will sag under the weight of all the layers of paint if I keep working at it and the amount of expensive ass paint I just wasted doing that. Digital art is different in that you have the investment in the technology, then you can create for free without thought of wasted materials. That’s what makes my paintings feel more precious 🤷🏼♀️
I am a diorama maker and i must say Damm lol.. you have out done yourself. The idea brilliant , execution was flawless, the detail is razor sharp. Even the lighting, temperature of the colors just truly amazing. The Heroic cut through the dino then assemble was insane. When you think it could not get any better, the calming melody is a touch from the heavens. Very well played my friend.
This Music is BEAUT! Could watch these all day with that kinda music! The body underwater looks awesome!! Probs my fave part! Its awesome seeing how these are made....thankyou
Спасибо за видео! Новый глоток воздуха (для меня) в создании диорамы!! Ваше произведение сложно сравнить и оценить! Великолепно!!!
Can I suggest a Polar Bear swimming under an ice pack, it would look great!
This is from another level ! Watching you creating the wave was stunning, the result is worth watching the whole video..thanks for sharing your talent
I am blown away by the creativity and execution. I cannot stop watching these.
the way you create this thing, the imagination you have, the details just amazing
Really impressive! This is real art. Love how the epoxy water looks like.
I’m amazed honestly when I looked at the thumbnail I thought it was a painting the wow factor on this peace is through the roof
This is sooooooooo amazing! I would have loved to see dripping water details perhaps in the mouth and splashes where he's bursting out of the water because I saw you do that in other videos and found those details next level! I'm seriously amazed by this and cant even process how talented you are!!!!!!!!!
Очень здорово вышло :D Золотые руки во всех смыслах) Люблю подобные видео и вот что заметил, девушки куда более элегантно и аккуратно делают такие диорамы ;)
I love how much detail they can get in such a big or small 3-D printed thing
I watched half of this video with my mouth wide open, and the other half rewinding to make sure I actually saw what I just saw..... Incredible skills, talent and presentation! Take a bow!
Absolutely stunning results after that process - I would never have realized the degree of difficulty until having watched the entire process it takes to get this amazing finish!
Your technique is so cool and you nail the ocean blue exactly what I imagine it to be.
It must have been nerve-racking to cut the dino after spending all this time painting it...
But the result really paid off. It's really splendid.
Ikr
Hollywood could Sorely Use this Young Mans Talent ............)
Que importante poseer las habilidades y por supuesto herramientas y accesorios para realizar un trabajo tan hermoso como este! Decir Felicitaciones se queda corto, pero FELICITACIONES Minibricks!! Los pequeños detalles hacen las grandes diferencias y usted logra hipnotizarnos con cada uno de ellos!! Un abrazo Minibricks !!!😘😊
That came together beautifully. Well done.
He just showing is that he Can’t only make a Cubeof water but also a HUGE waves, truly a master pieces
I think the spinosaurus is too big but what talents do you have my respects!!
Beautiful! Do you think you could do some water streams falling off the face and mouth with maybe fishing line and resin? Because something like that would have just given this a little bit more motion. The foam looked incredible!
Spectacular creation. Clever. Construction. You have the patience of a. True Artist and Saint....
2 days ago i rewatched all the Jurassic park movies on Netflix. Nice timing! haha
This is so amazing.. I wish I was as talented as this man..
When I saw the thumbnail, I thought it was CGI. But this is goddamn art. Well done!
I love you minibricks and your amazing work
The project was so time-consuming. That I managed to notice how my nails grew a little. Amazing work.)
The shape of this skull is unmistakable! :D You used Gojira as a base template and prolonged his snout, adding the sail as well, didn't ya? Even with all of that - great freakin' job! Enjoyed watching this!
У автора явно золотые руки, очень здорово 👍✨✨✨
Beautiful work!!
Wow, I think this is really great. I think this is art. I'm clumsy, so it's amazing to see people who make it like this. I envy them. They're so cool
This is absolutely incredible. Your talent and hard-earned skills are wonderful.
かっこいい…海の部分の艶が出た時鳥肌たった
look at that huge wave coming to the small boat! I am happy the Spinosaurus comes for saving them!
I know it’s not a Da Vinci, but this is one of the most beautiful and awe inspiring pieces of art I’ve ever seen. It makes me so curious about the oceans and what might exist. Just so beautifully done 💙💙💙
Don't count yourself short, toots, you're not bad looking yourself 😘 [farts loud] Sorry, had beans and cabbage for dinner because I'm poor. So if we hook up, baby, you're gonna have to break out the dough when we go to dinner and to WWE events. Damn straight, you's better be into WWE, all my women are!!! ❤️
@@little.bear344 the fuck?
@@little.bear344 wtf did i just read?
@@little.bear344 I love how unexpected this is 😂
this channel deserves 100 million subscribers
Amazing super creative with the foam on the wave!! Love it! Super excited for the next diorama for Godzilla as I'm a massive fan
The blue sweater is looking neat 🤙
I could never do something like this, great job!
Wow. I love watching you make these awesome Models. I sure Hope you winning awards in model building. Your Work is#1.
Awesome, really kinda satisfying to watch all the details that go in to it every little detail.
Impressive artistry and craftsmanship.
“Half my body might be gone, but at least I look fly as fuck.”
Dæmön 2021-
No Way . . .that was just . . .just . . .a joy to watch. Really inspired.
I wish more spinosaurus bones gets discovered so that we can finally make an accurate sculpture :(
Would’ve loved to see you make the Spino. Love watching you’re clay work man.
This is amazing, do you think you could do a Giant Manta Ray? that is like my favorite sea creature and I would love to see how you would present them.
I love your imagination and creativity! So much fun!
This is one of the coolest pieces of art I've ever seen!!
Вот такие таланты есть на просторах бывшего СССР. Мощно...
This is so fricking amazing, the details and motion in the piece are absolutely astounding. So beautiful 👏
These types of videos are SO much more satisfying and interesting than watching videos of people clacking and slurping around making food in their carefully staged kitchens. These types of videos are like Bob Ross in the modern era. With monsters, I mean.
Did you know that spinosaurus were actually land and sea animals that’s why they didn’t have any feathers
New evidence in their tail shape shows that they lived primarily in the water
im pretty sure they didn't live in seas
dinosaurs*
@@shabbir9480 evidence that plenty of dinos had feathers, like therazenosaurus
@@christianlud6740 i know
I am a huge fan of dinosaurs-especially spinosaurus. This was amazing
The things you make are amazing and creative! Your like a next level engineer if I do say so myself!
So cool and the Spinosaurus look amazing and the wave.
My girl and I have officially decided were getting into this together this stuff is so cool!
I'm Brazilian and I really like your videos.🙂😂😂😂😂🙂😉🤟🏾
I wish they had put water dripping off the spino, just missing that extra level of detail
Amazing work - and that little boat is toast.
Nice "Spinozilla" my friend! =)
Which sounds better for you. Spinozilla or spinezilla.
@@ziranimation4241 the user you are referring to is Spanish
What...
the concept of half way in water and half way out alone is brilliant
At 8:03.... I was like, "Noooooooo!"
Look at how they've massacred my boy!
The Spinosurus too UnU
This woman is the reason i was inspired to spent 1000+ hours making the coolest coffee table i could imagine
It’s lunchtime for spiney! A boat with a side of sailors! This is an absolutely phenomenal work of art! ❤️👍
You have golden hands.. this is beautifull..
"We need a bigger boat...!"
"We need a change of underwear!!!"
Absolutely Awesome !
I saw the thumbnail n wondered how you did the crest of the wave. Love it
Keep on creating
How is this the first time I've ever seen this channel, I need more of these videos in my life
+1 subscriber
She could sell these to museums they are phenomenal works of art
I have watched every video in ur channel, its an amazing channel and we learned some techniques from u, thank you for everything and could you please show ur face just to know who is making this ❤️
Вау! Потрясающая идея и безупречное воплощение!
Someone PLEASE give this man (or woman) a MEDAL! If I had even a quarter of his creativity, I wouldn't still be living with my mom. JK on that last part but still.
Even if the massively out of scale spinosaurus doesn’t get them that wave will mess them up. Very cool creation
If have Metallica, have my like...
Ps: your job is amazing
😀😀
I hope you know you have very pretty hands. Also, very clever method for doing a mold like this!
This video was great, then they introduced a cast, and silicone lost me then it made sense then lost me with the potato on a plank lol
Absolutely amazing video I’m glad that there are so many people out there with these talents for others to get inspired by thank you for the work you’ve done keep it up!
Just amazing, Really Amazing.
Amazing work, The detail work, wow. One thing bugging me is that the Spino is way too big.