After some rain my 916 Spider always has some water marks inside the boot. Wondering if it’s actually rain coming through the lock? What do you reckon?
Great video! For Spider I think you have to remove additionally the boot lock. Otherwise, the lever of the lock will hinder you from putting the black plastic part into position on the back side
Thanks for a great video..how do you change the front emblem on a 939 Spider 2007?...is it a heatgun and just try to get it loose..or is it screwed on? Thanks again
TIP: in my case the inner part of the boot lock was nlocking a piece of the plastic ring. So after trying for half an hour I figured out to losen the two screws of the lock. Remove the plastic cover to losen the lock and it will give you just a little bit more room to position the inner ring and lock it.
Thank you Neil fro another useful video, new shiny badges make a big difference to the looks of these cars. I would imagine that the procedure for the 156 boot badge is very similar? Regards
I have a 05 156 but the boot badge doesn't move so it's either seized or it's without that feature, I'll need to remove the inner panel to see what's there.
![Alfa Romeo GTV/916 Boot badge change [Tutorial]](http://i.ytimg.com/vi/gTeFqrpR9kA/mqdefault.jpg)
Great and very useful videos! Tnx 😉
Thanks Neil! Your channel and videos are a massive help for me! This one made my day! Greetings from Spain!
Glad you like them!
Thanks for these videos. Proud owner of an Alfa Spider 916
Thanks for watching
I need to do this soon - thanks Neil!
super useful, done yesterday..10min job thanks to you!
Excellent!
After some rain my 916 Spider always has some water marks inside the boot. Wondering if it’s actually rain coming through the lock? What do you reckon?
Great video! For Spider I think you have to remove additionally the boot lock. Otherwise, the lever of the lock will hinder you from putting the black plastic part into position on the back side
Nope. Goes back in fine
Great videos, Greetings from Germany from me and my Brera.
Hi, thank you for the video. I don't understand which component i need to rotate ... Thank you
Very helpful. Keep em coming.
Super useful, cheers. You don't happen to know the part number by any chance? I need to replace both badges on a 156 SW,
Thanks for a great video..how do you change the front emblem on a 939 Spider 2007?...is it a heatgun and just try to get it loose..or is it screwed on? Thanks again
i normally change the whole plinth.
Very helpful. Is it the same procedure on a 164?
Only the gtv I think
TIP: in my case the inner part of the boot lock was nlocking a piece of the plastic ring. So after trying for half an hour I figured out to losen the two screws of the lock.
Remove the plastic cover to losen the lock and it will give you just a little bit more room to position the inner ring and lock it.
Thank you Neil fro another useful video, new shiny badges make a big difference to the looks of these cars. I would imagine that the procedure for the 156 boot badge is very similar?
Regards
Raul Baonza I’ve not taken a 156 badge off in years so I can’t remember if it’s the same or not.
I have a 05 156 but the boot badge doesn't move so it's either seized or it's without that feature, I'll need to remove the inner panel to see what's there.
@@MrPittsbrother id make sure its a swivel badge thats fitted.
Can you get new swivel badge replacement for the 156?
have you tried it on a 156 sportwagon? Nightmare job!
yep. all boot trim off.
im betting my spring between the two badge parts will be missing.
Ping! into oblivion. lol
I have an early phase one which has a solid metallic badge. Can I swap it with newer two part badge?
Michael O'Horan id think so same bootlid.
Is that gtv going to be broken or saved , wonder if you could do a guide on how to remove the door mirrors all the best neil
hi just 3 bolts behind the cover. its being broken. ill try to do one when door gets striped down.
@@ItaliaAutos that would be great many thanks
Thanks. Ours both need to be changed.
hi. where can i get that spring (v-shape) under the badge?
sorry i dont know.
@@ItaliaAutos could you do me a favor and measure it one day when you ll be tackling that badge again.thanks