Funny you mention this, because I went and watched the DBK boys review of this blade after I posted this one, and just like you said with yours, it strikes a ferro rod well without the apocalyptic coating. Thanks for commenting this - I'll pin the comment to the top. 👊✌️
Man, that wick wax did the trick Mitch, nice. Gorgeous finish on that blade, and I love crowning everywhere, just gives knives and tools that gourmet look and feel. I agree there should be a bit of hidden striker area, that's be the icing.
Thanks G! As crowning goes, I'm more than willing to trade off a sharp spine for the awesome comfort, but yeah, as you mention...a small location on the spine such as the front 1" how Gary Creely does it/pommel on the heel of the tang like Lionsteel does it [at least I think - I'll find out], it would be some icing. As for this apocalyptic blade finish, I had first seen a similar one on a Dawson knife years ago - it was called Arizona Copper Finish. This one seems less forced, and like the knife was picked up off the ground following a nuclear blast...oh yeah, like the apocalypse just happened 😉. Thanks for checking it out. ✌️
Great knife and useful review. TRC is one of my favorite brands. To solve the ferro rod problem, many rods come with a striker. Or if you carry a multi-tool there are endless options to strike a rod on a Leatherman or Victorinox tool, or even a SAK.
Hey thanks for stropping by to check it out and comment! Absolutely agree that the ferro rod striker isn't a must, and really isn't in the primary wheel house for this blade - it's a great all-arounder. I love TRC too and am impressed with their hand finishing touches combined with their consistent production processes...it's why an Apocalypse is my ultimate fixie grail...soon...very soon. 👊✌️
Thanks Chuck. Though I had seen other channels cover of this blade, yours was the first in the U.S. Thanks for finding it a good home in my fixie collection👊.
@irenastoyanova2790 TRC is as good as any production brand on Earth for production and finishing quality ( I have experienced some custom makers that are price-competitive, but provide better finishing touches). As for Elmax, it is in the sweet spot for a fixed blade like this to beat on wood - TRC intentionally went with thicker blade stock for this reason...it can safely be beaten on, and I can vouch for beating on this knife. If you like the South Pole model, save the money for it and you will not be disappointed. Thanks for stropping by!👊✌️
So holes/cutouts in a fixie tang are common already for balance in the hand. As for these flared-out tubes, my best understanding for choosing holed versus solid core pins/bolts is 1) the added ability to lash the blade to a stick safely for extended length/use by tying rope through the holes and 2) the flaring of the hole essentially creates a positive counter pressure to ensure the scale stays snug to tang - imagine pins cut closer to flat and the epoxy breaks loose...you'd probably rather have the flared tube than a flatter tube/pin. Thanks for asking! 🤜🤛
Thank you for the review. The crowned spine on the satin version produces sparks well with a ferro rod.
Funny you mention this, because I went and watched the DBK boys review of this blade after I posted this one, and just like you said with yours, it strikes a ferro rod well without the apocalyptic coating. Thanks for commenting this - I'll pin the comment to the top. 👊✌️
Man, that wick wax did the trick Mitch, nice.
Gorgeous finish on that blade, and I love crowning everywhere, just gives knives and tools that gourmet look and feel.
I agree there should be a bit of hidden striker area, that's be the icing.
Thanks G! As crowning goes, I'm more than willing to trade off a sharp spine for the awesome comfort, but yeah, as you mention...a small location on the spine such as the front 1" how Gary Creely does it/pommel on the heel of the tang like Lionsteel does it [at least I think - I'll find out], it would be some icing. As for this apocalyptic blade finish, I had first seen a similar one on a Dawson knife years ago - it was called Arizona Copper Finish. This one seems less forced, and like the knife was picked up off the ground following a nuclear blast...oh yeah, like the apocalypse just happened 😉. Thanks for checking it out. ✌️
Great knife and useful review. TRC is one of my favorite brands. To solve the ferro rod problem, many rods come with a striker. Or if you carry a multi-tool there are endless options to strike a rod on a Leatherman or Victorinox tool, or even a SAK.
Hey thanks for stropping by to check it out and comment! Absolutely agree that the ferro rod striker isn't a must, and really isn't in the primary wheel house for this blade - it's a great all-arounder. I love TRC too and am impressed with their hand finishing touches combined with their consistent production processes...it's why an Apocalypse is my ultimate fixie grail...soon...very soon. 👊✌️
Nice review buddy! It's a great utility fixed blade
Thanks Chuck. Though I had seen other channels cover of this blade, yours was the first in the U.S. Thanks for finding it a good home in my fixie collection👊.
Whoa what a review. And what a knife! And what a beautiful thumbnail!
Thanks! I think this knife is a worthy carry by The Abominable Snow Truck. ❄️ ✌️
This is my favorite brand for fixed blade knives, which I want to buy soon but I don't know is it elmax steel so hard for the wood?.
@irenastoyanova2790 TRC is as good as any production brand on Earth for production and finishing quality ( I have experienced some custom makers that are price-competitive, but provide better finishing touches). As for Elmax, it is in the sweet spot for a fixed blade like this to beat on wood - TRC intentionally went with thicker blade stock for this reason...it can safely be beaten on, and I can vouch for beating on this knife. If you like the South Pole model, save the money for it and you will not be disappointed. Thanks for stropping by!👊✌️
why did they put two large holes in the handle/tang?
So holes/cutouts in a fixie tang are common already for balance in the hand. As for these flared-out tubes, my best understanding for choosing holed versus solid core pins/bolts is 1) the added ability to lash the blade to a stick safely for extended length/use by tying rope through the holes and 2) the flaring of the hole essentially creates a positive counter pressure to ensure the scale stays snug to tang - imagine pins cut closer to flat and the epoxy breaks loose...you'd probably rather have the flared tube than a flatter tube/pin. Thanks for asking! 🤜🤛