Oh man, I did this for a school project a while back, and I just left the channel as is, not expecting anything from it, sorry to keep some of y'all waiting with questions 😬😅
I'm Japanese. I'm so glad that young NON Japanese man make our flute and teach people how to make!!! Thank you so much for taking over our culture and spread it to the world 😊🙏
so grateful to you, my brother. not only is this a comprehensive tutorial, but it's a very relaxing watch with the music and your voice. Splendid work.
Really nice. I love these sorts of simple/inexpensive tutorials. I find them really great for beginners (like me) to help us 1] get a lot of the first-timer errors out of the way and 2] help me decide if I really want to go on to all the effort of doing a traditional/wooden project (that is, while at the same time saving a lot of money and -hopefully- still ending up with a usable instrument). Thanks much.
Thanks for sharing. If you cut the angles you will save all that pvc dust. Just file and sand to a smooth finish. PVC cement is very quick drying. Once dry it will not come loose. It becomes a one piece unit. To clean of print on PVC use finger nail polish remover. It works very well. But do it outside and not near an open flame. The solvent is extremely flammable. It will flash near a flame.
I don’t want to praise you, but you are amazingly laconic, unlike most the rest. And much more importantly the tool - flute is really nice and easy to make in accordance of your instruction.! Best of the best, next to La Kosse.....)) Не хочу вас хвалить, но вы удивительно немногословны, в отличие от большинства. И самое главное инструмент -флейта хороша и действительно проста в изготовлении по вашей инструкции. Вы лучший
I hate to be the kind that points things like this out, but has anyone noticed how Adam’s soft, narration voice sounds just like a younger version of Brad Pitt? I immediately felt like I was listening to Brad, doing his psych evaluations about his youth, to the computer, in Ad Astra... Seriously, you sound cool, Adam. You could do voice work for Hollywood. Thanks for this video, nice work!
That is really cool! Greetings from Brazil! How could I do the measures to get it tuned half step below? Make it longer and then shorten it until I get a D flat and then recalculate the holes?
The decription shows the placement of the holes but not the size of each hole . Unless i missed something it's not written or spoken . Can you tell us what size each hole should be ? Thank uou .
Hello Adam, I tried your method. This works for me, except for one thing: Overhere, in the Netherlands, I cannot buy a 3/4 pipe. The nearest diameter is 1 inch. At least with sufficient wallthickness. Do you know what the measurements are when using this bigger diameter?
Unfortunately I do not, that's a little bit outside my research for this video. Because it's a bigger tube, I assume the key will be different and the octave probably lower too. You could try by just experimenting where to put the holes and what sounds correct . Other than that I would just web search "shakuhachi 1 inch diameter"
So instead of using the machine sander like I did, you can just use sandpaper and sand the tip of the mouthpiece at the same angles that I described in the video. Sorry for the long wait 😅
MEU AMIGO PARABENS PELO SEU TRABALHO VOU LHE DAR NOTA 10 PARA VOCE, VC PO PASAR AS CONTAS PRA CHEGAR A ESSES CALCULOS PRA FAZER ESSE INSTRUMENTO, VOCE TEM ALGUM PDF PRA ME VENDER E QUANTO E O VALO EM REAIS, AGUARDO SUA RESPOSTA BLZ !!!!!!!!!!!!!!!!
I tried it with hand machines (not the machines seen on video) and its a huzzle, already error with first pipe. i bought alot of pipes and mouthpiece just in case so ill try other methods this time. this metod does not work no sound at all i think you can only make it work with the same machines on video and much pratice to make the mouth piece. not easy to do. Warning to others it does not work on first try need to try at least 4 to 5 pipes.
Oh man, I did this for a school project a while back, and I just left the channel as is, not expecting anything from it, sorry to keep some of y'all waiting with questions 😬😅
what are useing for tape measwer, what brand and what does it say on front of tape.
How many holes does the thing must have?
I'm Japanese. I'm so glad that young NON Japanese man make our flute and teach people how to make!!! Thank you so much for taking over our culture and spread it to the world 😊🙏
And that’s what it’s all about really isn’t it? Culture is something to be shared not hoarded.
Tbf y'all made an awesome ass flute, sure it's pentatonic but with meri-kari you can achieve full on chromaticism, shits INSANE.
God bless 🙏
@@hereformost7774 Sorry for the late response! And thank you so much for giving me the info kindly 😃
I really don’t think one man - with an enthusiastic, genuinely informative video to boot - should be viewed as “taking over [our] culture“.
@@atalantafugiens0426 I don’t think it was intended the way it sounded.
so grateful to you, my brother. not only is this a comprehensive tutorial, but it's a very relaxing watch with the music and your voice. Splendid work.
Japanese American here,
Good job. Keep up good work.
Not bad! I especially liked that you used the kakariko village theme as a demo!
You might like this then! th-cam.com/video/SyH8eS4EWtc/w-d-xo.html :-)
Thank you haha, that was actually my main inspiration to build this in the first place, so it seemed fitting
It’s actually from ghost os Tsushima
Really nice.
I love these sorts of simple/inexpensive tutorials. I find them really great for beginners (like me) to help us 1] get a lot of the first-timer errors out of the way and 2] help me decide if I really want to go on to all the effort of doing a traditional/wooden project (that is, while at the same time saving a lot of money and -hopefully- still ending up with a usable instrument).
Thanks much.
Aye man, thanks for doing something for us that can't afford a 600$ Shakuhachi, respect from Portugal🔥
Great job man I like to see young people doing crafts and this is amazing, you gain a subscriber here 👌🏻 keep doing things like this
Thanks for sharing. If you cut the angles you will save all that pvc dust. Just file and sand to a smooth finish. PVC cement is very quick drying. Once dry it will not come loose. It becomes a one piece unit. To clean of print on PVC use finger nail polish remover. It works very well. But do it outside and not near an open flame. The solvent is extremely flammable. It will flash near a flame.
Eres un gran profesor...muy claro todo el proceso, te felicito por tu talento!!
Really nice job! I wonder if one could just 3D print the mouth piece to make it even easier. Thanks for the tutorial I'll definitely be following it!
I don’t want to praise you, but you are amazingly laconic, unlike most the rest. And much more importantly the tool - flute is really nice and easy to make in accordance of your instruction.! Best of the best, next to
La Kosse.....))
Не хочу вас хвалить, но вы удивительно немногословны, в отличие от большинства. И самое главное инструмент -флейта хороша и действительно проста в изготовлении по вашей инструкции. Вы лучший
6:28 Is that Kakariko Village?
Great work and super easy tutorial!
I hate to be the kind that points things like this out, but has anyone noticed how Adam’s soft, narration voice sounds just like a younger version of Brad Pitt? I immediately felt like I was listening to Brad, doing his psych evaluations about his youth, to the computer, in Ad Astra...
Seriously, you sound cool, Adam. You could do voice work for Hollywood. Thanks for this video, nice work!
Dear Mr. Hults, thank you very much for this tutorial. It has been very useful. Greetings! Brian
Ah yes thank you Mr. Hults😂
That is really cool! Greetings from Brazil!
How could I do the measures to get it tuned half step below? Make it longer and then shorten it until I get a D flat and then recalculate the holes?
The decription shows the placement of the holes but not the size of each hole . Unless i missed something it's not written or spoken . Can you tell us what size each hole should be ? Thank uou .
Hello Adam,
I tried your method. This works for me, except for one thing: Overhere, in the Netherlands, I cannot buy a 3/4 pipe. The nearest diameter is 1 inch. At least with sufficient wallthickness.
Do you know what the measurements are when using this bigger diameter?
Unfortunately I do not, that's a little bit outside my research for this video. Because it's a bigger tube, I assume the key will be different and the octave probably lower too. You could try by just experimenting where to put the holes and what sounds correct . Other than that I would just web search "shakuhachi 1 inch diameter"
That’s great , what size of hole are you drilling? Thanks for you video
Good video. Straight to the point 👍
Holes positions and diameters are not mentioned in the video !
Yo, im loving the mumbo jumbo music 👌
So amazing sir,
If
1. you show how to blow the mouth piece.
2. The length from each hole to wherefore the mouth piece.
These two will make your flute perfect.
Thanks for the video! IMPORTANT NOTE: the hole placement in cm is off!
Hello!!!
Excuse me..
Could you tell me the length from end to end with the nozzle already in place?
Please !!!???
When everything is complete, the entire thing from top to bottom should be 21"
Hi, did you make the 'make your own Ukelele' video yet?
smart dude
Hmm, sounds good
Ahhh! KAKARIKO THEME!
hey Adam how to do the blowing part for those who don't have the machines, that is, manually please ♥
So instead of using the machine sander like I did, you can just use sandpaper and sand the tip of the mouthpiece at the same angles that I described in the video. Sorry for the long wait 😅
Yooo that zelda song👌👌👌
Nice job
Cost?
🌞wonderful
MEU AMIGO PARABENS PELO SEU TRABALHO VOU LHE DAR NOTA 10 PARA VOCE, VC PO PASAR AS CONTAS PRA CHEGAR A ESSES CALCULOS PRA FAZER ESSE INSTRUMENTO, VOCE TEM ALGUM PDF PRA ME VENDER E QUANTO E O VALO EM REAIS, AGUARDO SUA RESPOSTA BLZ !!!!!!!!!!!!!!!!
Wow!!! Spr'b💖
I tried it with hand machines (not the machines seen on video) and its a huzzle, already error with first pipe. i bought alot of pipes and mouthpiece just in case so ill try other methods this time. this metod does not work no sound at all i think you can only make it work with the same machines on video and much pratice to make the mouth piece. not easy to do. Warning to others it does not work on first try need to try at least 4 to 5 pipes.
Almost sounds like Brad Pitt is narrating the video
Do we need redstone?
👍💖🙏
Where do I find the measurements for the hole distances? I can't find the "description". Thanks, MB
looooooool
could have just cut the coupler with a miter or chop saw. No need for all that dust.
Throw up music😝
Mannnn whatcha got against Proleter?