2-Part Silicone Mold using Mold Star™ 16 FAST

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 306

  • @maverick744
    @maverick744 2 ปีที่แล้ว +128

    Out of all the videos this one is the best for beginners. You explained it thoroughly and made it simple to understand and thanks to you my first casting was a success!

  • @christion.miraca1942
    @christion.miraca1942 9 หลายเดือนก่อน +9

    Best tutorial on the subject I've watched. I actually feel confident about trying this thanks to your explanation and demonstration.

    • @SOMadeByYou
      @SOMadeByYou  8 หลายเดือนก่อน +1

      Great to hear!

  • @WarriorInnovation
    @WarriorInnovation 5 วันที่ผ่านมา

    The amount of videos ON THIS SUBJECT that I watched in 48 hours and this is by far the best one! You nailed all the grey area points! Well done and thank you

  • @cathyrodammer4190
    @cathyrodammer4190 ปีที่แล้ว +9

    Thank you, thank you, thank you! I have a small nativity that I bought at the dollar store, it’s surprisingly well detailed. I’ve tried so hard to make a mold of this, but because of the lantern and the staff, I couldn’t make it work this two-part mold, is a godsend, and so are you❤️

  • @mbr5290
    @mbr5290 9 หลายเดือนก่อน +2

    Like the other comment, I thought this was fantastic. You were clear, concise and straightforward, and took the time to explain every step. Thank you so very much.

    • @SOMadeByYou
      @SOMadeByYou  8 หลายเดือนก่อน +1

      Glad you enjoyed it!

  • @GOHMYSJWRHACYARTEETCETAL
    @GOHMYSJWRHACYARTEETCETAL ปีที่แล้ว +4

    FANTASTIC... 28 YEARS AGO I LEARNED THIS TECHNIQUE. AND TODAY I HAVE PROFESSIONALIZED MYSELF IN THE SUBJECT AND HUMBLELY TEACHING FOR FREE ON MY CHANNEL... PEOPLE THIS CRAFTSMANSHIP OF MAKING SILICONE RUBBER MOLDS. THANK YOU FOR THE NOSTALGIA. THANKS PARTNER

  • @alyssamarie5377
    @alyssamarie5377 ปีที่แล้ว +14

    Genius, one of the most helpful vids I've ever seen on TH-cam. I'm a casting beginner and this is way better than how I was gonna try to make my molds. Thanks so much!!

    • @sanjay3532
      @sanjay3532 11 หลายเดือนก่อน

      Same bro

  • @ooakartwithlindaE
    @ooakartwithlindaE 24 วันที่ผ่านมา

    You make it sound easy. I may have to try making molds again. FYI: That glass bear is a vintage Fenton Bear. I have a collection of them.

  • @auxpower13
    @auxpower13 3 ปีที่แล้ว +22

    Great job, Victoria! Thank you for taking the time to make such a thorough and informative video. Thanks to Smooth-On also for making it easy.

  • @astridvallati4762
    @astridvallati4762 ปีที่แล้ว +2

    Being a Film Gun supplier, we have up to now relied on outside Replica casters ( Hard Fibreglass and Soft Rubber Stunt Items.)
    Its good to have a Tutorial on DIY silicone mould making.
    Furthermore, I would make a Plywood Frame around both Mould Halves ( Cope and Drag) to prevent damage in Handling.
    Just got to find the Components here in Australia.

    • @victoriapitt2305
      @victoriapitt2305 ปีที่แล้ว

      I just recently overheard someone talking about Rowe Advanced Materials, in AU!

  • @ownsacat
    @ownsacat ปีที่แล้ว +2

    I always wanted to know how to do a 2 part mold. Those are my favourite ones to use. Thank you for this video.

  • @bearoyay
    @bearoyay ปีที่แล้ว +2

    Ive watched so many mold creation videos, this ones the simplest by far.

  • @blaketarpley8174
    @blaketarpley8174 6 หลายเดือนก่อน +3

    How did you not get any bubbles in the casting? Did you skip the step where you removed them with heat before pouring?

  • @Sean-ws9je
    @Sean-ws9je ปีที่แล้ว +2

    I Appreciate Your Time And Effort In Teaching Me How To Do This Thank You

  • @animalyze7120
    @animalyze7120 2 ปีที่แล้ว +10

    Very well presented and detailed, probably the best 2 part mold making/Casting tutorial I've seen. I use this for my plastic model kits usually to make up missing or broken pieces, I literally mold the entire sprues/runners and keep the copies in the original box for use later as I get many incomplete kits from estate sales and such. Your method is spot on to mine except now I might try the brand you are using. Great video Victoria!

  • @dpeate
    @dpeate 6 หลายเดือนก่อน +1

    Fantastic video! Could I use this technique for a small 12" cardboard/paper mache animal head? Thanks.

  • @danielle_0824
    @danielle_0824 4 หลายเดือนก่อน

    This is my favorite explanation/demonstration that I’ve watched thus far. It’s my second time watching and I plan on referring to it when I make my molds. Thanks for this!

  • @deskofswitzer
    @deskofswitzer ปีที่แล้ว +1

    @Victoria P., This is the fifth video I watched. The others were made by professional craftsman, and this video was the best.
    Clear and Simply process. I"m going to use your video first to make a two piece mold.

  • @RPittman77
    @RPittman77 หลายเดือนก่อน

    Oh my gosh, thank you so much. I watched so many other crap videos before I found you. This is exactly what I’ve been looking for! 😊

  • @dominikvdovski996
    @dominikvdovski996 2 ปีที่แล้ว +4

    Dear Victoria! Congratulations on this video - very informative and helpful, you sure know what you are doing. And it's a rare thing to see someone knowing how to pour liquid out of cubic container without jumping and waving of the liquid. And the double mix! Not many tutorials shows the importance of this step. Warmest greetings! Dominik, sculptor from Poland.

  • @injectionAI
    @injectionAI 6 หลายเดือนก่อน +1

    i love this so much. Would this process work for something concave and thin ( 1/4 inch) like a helmet visor? I want to resin cast a sci-fi style visor from a 3d print.

  • @thefinalaccessory5702
    @thefinalaccessory5702 2 ปีที่แล้ว +3

    You did an amazing job explaining and demonstrating. Just wow! Every single second of this video was necessary and useful information. I totally understand the process. Thank u!!

  • @juliewick
    @juliewick 2 ปีที่แล้ว +6

    Wow! This was the most thorough tutorial I’ve ever seen! You did a fantastic job explaining each step in your process and providing the Why/what/how to support! They turned out amazing! Thanks for sharing ❤

  • @julieabraham102
    @julieabraham102 2 ปีที่แล้ว +3

    Love your straightforward and super-clear explanations:. Very good on using time efficiently for the viewer. Much appreciated.

  • @Sean-ws9je
    @Sean-ws9je ปีที่แล้ว +2

    Thank You For Teaching Me How To Make A Mould To Do Casting With

  • @Garcia....
    @Garcia.... 10 หลายเดือนก่อน +1

    Excellent!!! Great tutorial, too easy to follow! Thanks for sharing! 👍👍👍👍 helpful 😃

    • @SOMadeByYou
      @SOMadeByYou  8 หลายเดือนก่อน

      You're very welcome!

  • @earthkindsanctuary
    @earthkindsanctuary ปีที่แล้ว +1

    brilliant video taught me everything i needed to know about two part mould making

  • @nickkemp4979
    @nickkemp4979 8 หลายเดือนก่อน +1

    This is great. Thanks for this. I plan on making a silicone mold out of a 3D print which I then want to use for lost wax metal casting.

    • @SOMadeByYou
      @SOMadeByYou  8 หลายเดือนก่อน

      Go for it!

  • @Essetheartist
    @Essetheartist 11 หลายเดือนก่อน +1

    Just got here after lengthy. And complicated other videos. Thank you!

    • @SOMadeByYou
      @SOMadeByYou  8 หลายเดือนก่อน

      You're welcome!

  • @whitneybledsoe2660
    @whitneybledsoe2660 ปีที่แล้ว +3

    Thank you for explaining this so well! This helped me a ton!

  • @billsrippedfitnessover5047
    @billsrippedfitnessover5047 3 หลายเดือนก่อน

    Very good and simple. I'm gonna try this exact method with same products doing a 1/4 scale human figure sculpture made of paper mache. It will definitely be more complex.

  • @alleykatt109
    @alleykatt109 3 หลายเดือนก่อน

    Wow, you’re really good. Thank you for sharing. Learned it all, so to say. Thanks for explaining clearly and concisely. I’ve got some pet projects to complete now.

  • @erincammie-spangler7757
    @erincammie-spangler7757 2 ปีที่แล้ว +4

    Wow! So many “little things” I’ve missed, but make a HUGE difference in the outcome! Thank you so much! I’m sure my crafts will appear more “professional” as well!
    P.S. thanks for the handy app for determining the amount of product needed!

  • @qoph1988
    @qoph1988 6 หลายเดือนก่อน +1

    This tutorial is so well done and professional

  • @mizzourita3896
    @mizzourita3896 ปีที่แล้ว +1

    Was not watching the video as I was doing my own thing with some resin when you pulled it out of the mixing cup, scared the hell out of me! 😂

  • @JaymeVanAuken
    @JaymeVanAuken ปีที่แล้ว +1

    Excellent video, This will be of great help with my mold-making project - Jayme
    👍

  • @susiecollier9207
    @susiecollier9207 10 หลายเดือนก่อน +1

    Thank you for this easy to follow tutorial.❤️❤️❤️

    • @SOMadeByYou
      @SOMadeByYou  8 หลายเดือนก่อน

      You’re welcome 😊

  • @frankiedollar5407
    @frankiedollar5407 2 หลายเดือนก่อน

    Thank you so very much ❣️I learned what I needed to know without the fuss. You do a great job and will be seeing a lot of me in the future.

  • @longbeachinthehouse
    @longbeachinthehouse ปีที่แล้ว +2

    Wow! Great tutorial!

  • @prathameshthakur6789
    @prathameshthakur6789 4 หลายเดือนก่อน

    Hey, Thanks for the great tutorial. Can I use this same mold technique for resin casting?

  • @robertflores8234
    @robertflores8234 ปีที่แล้ว +1

    Wow looks easy! Great instructions!

  • @jagodarogulja1436
    @jagodarogulja1436 ปีที่แล้ว +1

    You have prepared a wonderful video. Thank you because you said and showed everything simply but very precisely. please, can you help me: can I use vaseline instead of "ease release 200"?

    • @victoriapitt2305
      @victoriapitt2305 11 หลายเดือนก่อน

      I know some people mix Vaseline with mineral spirits as a release when casting silicone into silicone, but I do not know how it works against resins.

  • @ernesthoescalante3698
    @ernesthoescalante3698 ปีที่แล้ว +1

    Sweet thanks I can’t wait to start making silicone things

  • @alerey4363
    @alerey4363 2 ปีที่แล้ว +2

    Outstanding quality of the final result and even better detailed step-by-step explanation with a nice soft voice (every other casting video sucks in all these areas).Subscribed!

  • @georgianasalter
    @georgianasalter 4 หลายเดือนก่อน

    How would you do a mold of a mug? Where you have the space where the liquid goes, would you pour silicon into that space?

  • @rickietaylor6760
    @rickietaylor6760 2 ปีที่แล้ว +2

    Take your time every time! You did an awesome job!

  • @MrBearslock
    @MrBearslock 3 ปีที่แล้ว +4

    Thank you for taking the time to do this video. Very informative and well done.

  • @DanSwanson2070
    @DanSwanson2070 9 หลายเดือนก่อน +1

    You can fill the mold with water and measure that to find the volume also

  • @dianabuckner-jd9tz
    @dianabuckner-jd9tz 5 หลายเดือนก่อน +1

    Very helpful and detailed information ❤.

  • @akidoalleyne7983
    @akidoalleyne7983 ปีที่แล้ว +2

    Can I make candles using silicone and this mold method ??

    • @victoriapitt2305
      @victoriapitt2305 ปีที่แล้ว

      yup! A silicone mold will work for casting melted wax.

  • @andibay3736
    @andibay3736 3 หลายเดือนก่อน

    I didn’t see a step
    where the hole was added to pour the casting product. Did you just cut away some of the silicone?

  • @Aangel452
    @Aangel452 ปีที่แล้ว +1

    Thank you so much for your easy tutorial, cant wait to try this with my many projects ahead.

  • @periwinklepony5625
    @periwinklepony5625 6 หลายเดือนก่อน +1

    Thank you for the tutorial!
    Will the silicone withstand very hot temperatures like melted glass or melted sugar?

    • @victoriapitt2305
      @victoriapitt2305 5 หลายเดือนก่อน

      This silicone can withstand temps up for 450 degrees F. So not melted glass but probably yes on melted sugar.

  • @jenniferlehman3342
    @jenniferlehman3342 8 หลายเดือนก่อน +1

    Very nicely done and helpful

  • @LeeEricsson
    @LeeEricsson 2 ปีที่แล้ว +1

    Terrific demonstration.

  • @debbieabbott5503
    @debbieabbott5503 3 ปีที่แล้ว +6

    Amazing and your videos are fantastic, well explained and makes me want to get started on art projects. Thank u so much 💓

  • @JonathanGorre
    @JonathanGorre 2 ปีที่แล้ว +2

    Where can i buy the materials?

  • @whyMDO
    @whyMDO 5 หลายเดือนก่อน +1

    Thank you for sharing!

  • @jariseri5583
    @jariseri5583 ปีที่แล้ว +1

    Excellent instructions

  • @paganolux
    @paganolux ปีที่แล้ว +1

    gracias, el resultado es muy bueno.

  • @williamvan909
    @williamvan909 3 หลายเดือนก่อน

    😊😊😊 outstanding job well done 👍 now I can do My own molds you're The greatest 😊😊 thanks for the information take care stay safe out there 🙏🙏🙏❤️

  • @edhesner3773
    @edhesner3773 8 หลายเดือนก่อน

    Victoria, I need to make one small part, not much more than about an inch long, to replace a missing part in a plastic model kit. Seems like it would be awfully expensive for such a small part to purchase all those materials. Would there be any better way to do it?

  • @jagodarogulja1436
    @jagodarogulja1436 ปีที่แล้ว

    please, one more piece of advice: the model for which I want to make a model according to your tutorial is made of wood. how can I protect it before work? is it enough to varnish it with acrylic varnish?

  • @draiyko
    @draiyko ปีที่แล้ว +1

    Brilliantly done. Thankyou...

  • @Ibaneddie76
    @Ibaneddie76 ปีที่แล้ว +1

    Great video!

  • @JrBurriss
    @JrBurriss 3 หลายเดือนก่อน

    Extremely helpful information. Thanks for sharing. Just my 1 cent

  • @yvonco
    @yvonco ปีที่แล้ว +2

    That was beautiful and thank you!

  • @walidou19692
    @walidou19692 3 หลายเดือนก่อน

    Thank you for the good explanation 🙏

  • @wandacanon2885
    @wandacanon2885 3 หลายเดือนก่อน

    Excellent video. Thank you.

  • @eazypeazyenglish7244
    @eazypeazyenglish7244 ปีที่แล้ว +1

    Is that resin you used to cast bear model???

  • @LordoftheCats
    @LordoftheCats 3 หลายเดือนก่อน

    If you make a model out of clay, do you spay it with release before pouring silicone over it?

  • @ownersguides
    @ownersguides ปีที่แล้ว +1

    We don't have to De-Gas the silicon mixture before pouring into the mold?

    • @linhuiming
      @linhuiming ปีที่แล้ว +2

      She should be using platinum-cured liquid silicone with a lower viscosity. If you use tin-cured silicone or higher viscosity, it is recommended to vacuum degassing, otherwise there will be a lot of air bubbles.🚩🀄

    • @victoriapitt2305
      @victoriapitt2305 ปีที่แล้ว +1

      Some silicones do require degassing, but the Mold Star line is a low viscosity silicone that does not require degassing! Hope that helps!

    • @victoriapitt2305
      @victoriapitt2305 ปีที่แล้ว +1

      @@linhuiming Yup. Mold Star is a lower viscosity line of platinum silicone, perfect for those without a degassing chamber.

  • @laidman2007
    @laidman2007 ปีที่แล้ว +1

    Good craftsperson!

  • @jessecartelli5422
    @jessecartelli5422 9 หลายเดือนก่อน +1

    Thank you ! Looks great

    • @SOMadeByYou
      @SOMadeByYou  8 หลายเดือนก่อน

      Glad you like it!

  • @kevinarnold4007
    @kevinarnold4007 ปีที่แล้ว +1

    Question: I noticed you used what seemed to be a glass figure as your source material. Does the material matter? If I used, say a child's plastic toy would the silicone stick to the original, to the plastic? or would it release as easily? Great informative video btw.

    • @linhuiming
      @linhuiming ปีที่แล้ว +1

      If you are using a plastic toy as a master model, it is recommended that you use a release agent to avoid separation difficulties. In addition, it should be noted that there should be no holes in the master mold.🚩🀄

  • @stuart999able
    @stuart999able 3 ปีที่แล้ว +2

    I found this video very helpful in moldmaking

  • @Sichel22
    @Sichel22 11 หลายเดือนก่อน +1

    Great Video !
    Good work there!

    • @SOMadeByYou
      @SOMadeByYou  8 หลายเดือนก่อน

      Thank you very much!

  • @oussamachdaoui3110
    @oussamachdaoui3110 ปีที่แล้ว +1

    thanks for sharing

  • @dasilvaprimeauto7833
    @dasilvaprimeauto7833 6 หลายเดือนก่อน +1

    Really well done video

  • @eBiCrafter
    @eBiCrafter ปีที่แล้ว +1

    Thanks for sharing ❤

  • @humpahamster
    @humpahamster ปีที่แล้ว +1

    Would you consider me paying you to make like 6 easy molds for me? And maybe 2 difficult molds?

  • @RavenRaven-se6lr
    @RavenRaven-se6lr ปีที่แล้ว +1

    Nice job

  • @samuraidjinn
    @samuraidjinn 3 ปีที่แล้ว +2

    I found this very helpful! Thanks for your knowledge and information in the video.

  • @ivanjenkins5900
    @ivanjenkins5900 4 หลายเดือนก่อน

    Great Step by Step Video! TY

  • @deckix7204
    @deckix7204 10 หลายเดือนก่อน +1

    really impressed

    • @SOMadeByYou
      @SOMadeByYou  8 หลายเดือนก่อน

      Thank you so much!

    • @deckix7204
      @deckix7204 8 หลายเดือนก่อน

      I’m actually half way through attempting this. First half of the mould I did last night and is currently setting 😊.

  • @lindaw505
    @lindaw505 2 ปีที่แล้ว +2

    Outstanding video!! Very clear and informative- Thank you 😊

  • @dparker6706
    @dparker6706 ปีที่แล้ว +1

    What happened to part 1 of this video? I couldn't find it. 😧

    • @victoriapitt2305
      @victoriapitt2305 ปีที่แล้ว

      This video was only 1 part. Maybe you are mixing it up with something else?

  • @geevargas784
    @geevargas784 ปีที่แล้ว +1

    Always appreciate the good work 👏

  • @hankb7725
    @hankb7725 2 ปีที่แล้ว +1

    do you have to let the mann release dry first after spraying?

    • @victoriapitt2305
      @victoriapitt2305 ปีที่แล้ว

      Yes this is best practice. Sometimes if I pour the silicone too soon it ends up with a tacky surface.

    • @linhuiming
      @linhuiming ปีที่แล้ว

      If the release agent is not dry and the platinum-cured silicone is poured directly, it will cause the contact part to become sticky after curing. This is because substances such as N, P, and S are likely to cause poisoning of platinum silicone and inhibit curing.🚩🀄

  • @seamsewfine
    @seamsewfine ปีที่แล้ว +1

    Oh my goodness! I tried watching another video prior to this and he really just had me rethinking everything. ( I do not mean to be negative about another person, but he really liked the sound of his own voice) But then I found you! You explained everything so very well and had each step indicated that was important. So thank you so much for making this and sharing your talent! Your bears are really great. I am going to attempt to make a missing piece of a one of a kind chess set, wish me luck!

    • @victoriapitt2305
      @victoriapitt2305 ปีที่แล้ว

      You got this!! (I notice you posted 2 months ago, how did it turn out?!!)

  • @Ashes2ashes1111
    @Ashes2ashes1111 9 หลายเดือนก่อน +1

    I have that same exact glass bear!!!!

    • @SOMadeByYou
      @SOMadeByYou  8 หลายเดือนก่อน +1

      We must have the same exceptional taste in glass bears! 😉

  • @laurenseamsodd
    @laurenseamsodd 3 ปีที่แล้ว +3

    What a great step by step, thank you!

  • @h7opolo
    @h7opolo 8 หลายเดือนก่อน

    subbed cuz you said "hyperspeed", and you're a smooth-on channel.

  • @palavadiy
    @palavadiy ปีที่แล้ว +1

    very nice work

  • @duaasada
    @duaasada 3 หลายเดือนก่อน

    How u mange to have the result without bubbles? How cm long is the bear thank u ❤

  • @gladiatormechs5574
    @gladiatormechs5574 2 ปีที่แล้ว +1

    does a 2 part mold last a lot longer than a one part mold.. it just does not seem to take abuse like pulling , stretching like a one part mold.

    • @victoriapitt2305
      @victoriapitt2305 ปีที่แล้ว +1

      That’s definitely part of it, the mold will have less abuse. Using the release agent also helps extend the life of the mold because it helps to protect the silicone oils from drying up due to the heat of the resin while curing.

    • @gladiatormechs5574
      @gladiatormechs5574 ปีที่แล้ว

      @@victoriapitt2305 would you know if their are any cheaper oils i could use other then expensive mold release.. example , could i use olive oil in the molds. or other kitchen oils ?

    • @linhuiming
      @linhuiming ปีที่แล้ว

      The casting material is the biggest factor affecting the service life, and other factors include the type of silicone, mold maintenance, etc.🚩🀄

    • @linhuiming
      @linhuiming ปีที่แล้ว

      @@gladiatormechs5574 Silicone oil (silicone fluid) is recommended.🚩🀄

  • @lucymills3823
    @lucymills3823 หลายเดือนก่อน

    Really helpful great video thank you

  • @kellemccracken8818
    @kellemccracken8818 2 ปีที่แล้ว +1

    How can I make a silicone mold of a glass egg trinket box?

    • @victoriapitt2305
      @victoriapitt2305 ปีที่แล้ว

      Hard to say without seeing it. I recommend contacting Smooth-On tech support.

  • @hollymedici2936
    @hollymedici2936 2 ปีที่แล้ว +1

    great video full of info thank you

  • @c.i.b.i.a
    @c.i.b.i.a ปีที่แล้ว

    Hello! I've been crafting silicone molds for my customers and noticed varying behaviors in the same brand of siliconeI use platinum based silicon. While previous curing times difered-ranging from 24 hours to as little as 3 hours-they never affected the resin outcome until now. Recently, when the silicone cured within 3 hours and I poured resin into it, the silicon lost its shine upon removal of resin from the mold. This unexpected issue has me deeply concerned. Any guidance you could provide would be greatly appreciated. Thank you.

    • @victoriapitt2305
      @victoriapitt2305 11 หลายเดือนก่อน

      There are a few things that could be going on there. I recommend calling the manufacturer of your materials. If it's Smooth-On, they have amazing technical support.