Shoe Rack of PVC PIPE: DIY ab Cool ideas:

Do It yourself at home. Simple design using PVC Pipes yet robust for use. Fits behind the door.
Important. You can use cardboard on top instead of knitting the surface of racks
Material required:
1) PVC Bend: 12 nos
2) PVC End cap: 06 nos
3) PVC T: 20 nos
PVC pipe cuttings:
1)PVC 34 inch: 09 nos
2)PVC 32.5 inch: 01 nos
3)PVC 28 inch: 01 nos
4)PVC 04 inch: 10 nos
5)PVC 1.5 inch: 14 nos
Tools:
1) Hacksaw blade
2) Wood file
3) Sand Paper
4) PVC pipe cutter
5) Measuring tape
6) Hammer
7) PVC adhesive
8) Knitting plastic wire
9) Hand drill machine
10) Screwdriver
11) Pencil/ marker
Links of interesting ideas
1) Cardboard aero plane: • Make aeroplane from ca...
2) Stool from PVC pipe: • Make stool using PVC p...
3) Tool to pluck fruits from tree: • PVC pipe and waste bot...
4) PVC foldable table for laptop: • DIY low cost foldable ...
5) Restoring shape of PVC pipe for reuse: • Hot water can restore ...
6) Can hot water be best solution to remove glued PVC joints: • How to remove glued PV...
7) Table from PVC pipes: • Table from PVC pipes: ...
8) Drawing board from PVC pipes: • Adjustable table made ...
9) Bath room cloth hanger: • Cloth hanger of PVC pi...
12) How to use Teflon tape in right way: • टेफ्लॉन टेप को सही तरी...
10) Shoe rack from PVC pipes: • Shoe Rack of PVC PIPE:...
11) Elegant tooth brush stand from PVC pipe: • Tooth brush stand, fro...

[@javeedahmed3415]

Good. Good

[@AB_Coolideas]

Thanks

[@samjose11]

nice work, but camera person zoomed it too much.. instead of nylon thread, two long pipes from left to right would have been far better.

[@AB_Coolideas]

Yes, you are right. But this keeps it light, reduces cost and washable

[@vasantikale6712]

कृपया टुल किट के बारे में जानकारी देते हुए आप विडियोज बताया करे आपके सभी आईडिया ज बहुत अच्छे हैं

[@ArifBookseller]

Sure madam. Thank you for the suggestion

[@carlenereid2763]

I love this one very much

[@AB_Coolideas]

Thanks

[@MimiMimi-mv2ii]

Very nice

[@AB_Coolideas]

Thanks

[@jagadishchandrakanaiya8781]

bahot bahot sukriya pyare dhanyavad very good job

[@ArifBookseller]

My pleasure

[@extremereclusefallows5779]

A Mind Teaser

[@brunalombardi8003]

Gracias 👏👏👏

[@AB_Coolideas]

My pleasure

[@raulanibalmetti820]

Very good.

[@AB_Coolideas]

Thanks!

[@extremereclusefallows5779]

I used three boards
2- 1x10 12' long cut into 4' lengths
1- 1x8 8' long cut into 8" lengths
Each cut in half diagonally for
the support
Used mitre saw, air nailer
with two inch nails and
Liquid nails

[@AB_Coolideas]

Nice work!

[@honeyque228]

I love shoe racks! Do you have any videos of tilted shoe racks? I suck at measurements.

[@AB_Coolideas]

Please description for measurements

[@honeyque228]

13.4-in D x 23-in W x 30.5-in @@AB_Coolideas

[@albeniasantos5693]

Muito bom Parabéns nota 10

[@AB_Coolideas]

thank you

[@happilyforever.aashuhappil2972]

इतने मे तो रेडी मेड मिल जाता है

[@TapanDas-el2bp]

Excellent job

[@AB_Coolideas]

thanks

[@lorefreedom6386]

Very well structured, nice work.

[@AB_Coolideas]

Thank you

[@ehsanmashkoor97]

Video me music ki jaga apni awaaz me bol lete to acha hota

[@kulvinders2]

Good Idea But Not parallel

[@AB_Coolideas]

suggest ideas if any. Will try for next project

[@mitudt5396]

Good job. Very nicely demonstrated with measurements and quantity required. Well done.

[@AB_Coolideas]

Thank you very much!

[@firewire8912]

Honestly wood would have been just as easy and looked much better

[@AB_Coolideas]

Wood work is always a fantastic and beautiful.

[@reginacele9405]

Podia escrever em português eu morro no Brasil.

[@AB_Coolideas]

fine

[@marileyva2031]

Creativisimo!!! Super!!.

[@AB_Coolideas]

Thank you! Cheers!

[@josepalomo5313]

Uyytutyyyythyty6r tu ya te tu eres tú eres tú yyyy 2 yay te

[@madhuphanindranathappaji8923]

Good

[@AB_Coolideas]

Thanks

[@edigabnsprabhugoud1128]

good design. simple method and you tube demonstration is good with item measurements. do some more items....thank you.

[@AB_Coolideas]

Thank you . Sure. Watch AB cool ideas for some more items

[@raulanibalmetti820]

Debieras hubicarte por detrás de lo que estás mostrando como armar.

[@AB_Coolideas]

ok

[@orientalengineers5860]

If the plastic wire is knitted cross like chair sheet, it becomes more strong and beautiful. Otherwise it is perfect👍.

[@AB_Coolideas]

sure. Rightly said.

[@ЕвгенийВасичев-н3м]

👍👍👍👍👍😊😊😊😊😊

[@suresh6084]

Elbow aur tee kitne mm ka lena hi??

[@AB_Coolideas]

You need to ask as per the size of pipes you have chosen. I have chosen 1/2 inch pipes size hence elbows are also called 1/2 inch

[@sendetasarla9083]

Congratulations I wanted to get a lot from this pipe but I couldn't find it

[@AB_Coolideas]

Tanks

[@kvdgadj]

How much did everything costs?

[@AB_Coolideas]

approx Rs 700

[@budimandjohan2616]

Tolong perinciannya pipanya ukuran pipanya biar penonton paham 👍

[@AB_Coolideas]

Flexible depending upon the requirement

[@MOHAMED_MASRI]

very good but
Need to know the dimensions of pipes before cutting

[@AB_Coolideas]

1/2 inch size

[@farinaz947]

Total cost of production?

[@AB_Coolideas]

Around 6 hundred

[@RakeshMishra-dp6sh]

Price bataye

[@AB_Coolideas]

Rs 500

[@naturallygifted2002]

I was wondering when you were going to bring out the hammer 🔨 then you return to using your 🖐. A mallet would work best.

[@rog38]

Saves buying a mallet

[@AB_Coolideas]

Nice suggestion

[@violetmurphy5177]

Everyone needs a mallet!

[@karaoketime2665]

pretty cool but you coulda bought the rack for 10 bucks couldn't you? but it is a fun project to do with a kiddo

[@AB_Coolideas]

Its different experience making it our self using pipes and its joints.

[@karenmartin4663]

What does “nos” mean ?

[@AB_Coolideas]

Numbers

[@anapaulaguedestavares8017]

Alg podia trad eu não falo inglês 😰

[@regina4012]

Tire essa musiquinha cansativa, pf. Com ela, fico adiantando o vídeo, pq não dá pra ficar ouvindo , mesmo q seja baixinho....não dá.
Deixe só o som do seu trabalho, é muito agradável.

[@AB_Coolideas]

Tank you advice. Will take care in next video

[@raulanibalmetti820]

Demostración insufrible por lo lenta y repetición de pasos.

[@karenmartin4663]

Puedes acelerar la velocidad de los videos es lo que usualmente yo hago xq tbn me desesperan las velocidades de los videos muchas veces. 1.5X or 2.0x choose ur speed!!!
And thank you for the video !!! I’m taking notes to build myself one ! I’m trying to guess the diameter of the pvc pipe. Is it 1/2 inch?

[@AB_Coolideas]

It is 1/2 inc you can increase it to 3/4 or 1 inch for heavy

[@АлександрЛукин-ь1э]

Н

[@aukanade2010]

time wasted