I have an old hilti TE60 bought in a car boot sale for about $100 It has a theft protection system light on that stops it from working and I have no fob key to activate it. I don't want to go to hilti as they charge a lot of money. Any suggestions before I throw it to the bin?
ابتكار طريقة لتصفير وإعادة تشغيل الدارة الرئيسية المعقدة المسؤولة عن تشغيل نظام عمل الكسارة الهيلتي موديل TE1000AVR فخر منتجات هيلتي الالمانية Innovating a way to reset and restart the main circuit complex is responsible for operating the system work Demolition breaker Hilti Model TE1000AVR, the pride of the German Hilti products visit us on website www.npt.najeco.com
Hi, what about TE 3000 AVR, I have the same issue, I turned off the red light with laser, but I couldn't make it work. Is there a different way to fix that or something I ignored.
Şenol Kaytanlı no, you have done all you can do , they work at the same principle they have SR motor ( switched reluctance motor ) i think there are problem in the way of work because there is a lot of electronic element in the main board and when the breaker get working , the electric elements separated from it's places , and the selecon material where but on the board , prevent you to fix any thing so it big mistake and Hilti ignore that . thank you again
thanks for this informational video but i kind of did'nt get what u did there... all i understood was u pinted the laser at the red light and u reset it.... so if its that simple, do you really need to open the tool to do what u did or can u do it with the tool closed up and point the laser at it from the outside? Looking forward to hear from you. thanks
+Mouad Rachidi Welcome Mr. I will answer your question: ( do you really need to open the tool to do what u did ) I have been working in the maintenance center, and when the customer brings his machine, in order to repair it, we dismantle and analysis of faults in it, and in any case I will soon upload video on TH-cam, explain the method and system work fot TE1000 AVR , and please visit our site maintenance, in order to understand my intention and my goal of video publishing www.npt.najeco.com
Si funciona, yo tenia un te60 y el único problema que tenia es que se había dañado el cable de corriente, todo lo mecánico estaba en perfectas condiciones, solo le pase el láser y funciono. gracias
i had the same problem and i also tried solving it with a laser annd it worked aslong as it is still plugged in. as soon as you unplug it and replug it again the light goes on again and have to laser restart it again.
OLÁ AMIGO EU FIS COM UM LESE DESSE MESMO JEITO AI EM UM DO MESMO HILTI TE 1000 AVR, SÓ QUE FUSIONOU E DEPOIS PAROU NÃO QUIS FUSIONAR MAS NÃO,O QUE SERÁ QUE PODE SER ?
Boa noite amigo e o seu comentário eu estou com uma máquina dessa mesmo com esse mesmo problema fiz mesmo procedimento aí do vídeo com laser e nada foi resolvido não consegui êxito nenhum encontro com a máquina parada e a placa não tem possibilidade de recuperar ela porque dá é coberta com a Regina plástica não sei ponto a máquina parada e uma placa dessa muito cara ele funciona ou também fiz com LED e acendeu as luzes apontei o laser na direção do EDGE funcionou e depois parou não funcionou mais souber de algum resultado aí você fala para mim valeu obrigado aí uma força
MUCHAS GRACIAS, ESTUBO MUY BUENO EL VIDEO, COMPRE UN HILTI 3000AVR Y OJALA NO ME APAREZCA ESAS LUCES ROJAS, Y SI APARECIERA ESAS LUCES PROBARE SU ENSEÑANZA....MIL GRACIAS.
Asslam o alaikum brother i m also working in a tools service center can u tell me plz where do i find the control board of te 1000 avr i have 12 piece to repair help me out please ,thanks
Estimado, soy de Argentina y tengo un problema con el martillo Hilti TE-706 AVR. El fallo es que al intentar encenderlo intenta arrancar y se para (la mecanica esta en perfectas condiciones) luego enciende la luz de servicio. Muchas gracias desde ya, saludos cordiales Simon Herrera. Dear, I'm from Argentina and I have a problem with the Hilti TE-706 AVR hammer. The fault is that when trying to turn it on it tries to start and stops (the engine is in perfect condition) then turns on the service light. Many thanks from now, best regards Simon Herrera.
This means that the fault in the main circuit and not in the reboot circuit and in this case you have to change the main circuit, and nothing to do but change the main circuit good luck
hallo I am from kosovo I servising hilti watched the video hilti TE1000 avr all hilti valid for a lazer to the code or only for the 1000avr hilti please help me
the service indicator/light is an indication that your tool needs serviced not that the light only needs reset. would you do that with your car...no. send the tool to hilti for a professional repair and you will get a warranty with the repair. Yes you will reset the light but your tool will only lack performance and lead to a more costly repair in the future. this guys tool in the video really needs a repair or service.
it can not possible to reset the tool Hilti breaker with any "red light". And if you see that man shown not only one video but it compiles two videos of Hilti breaker
i have same problem and i also tried solving it with a laser and it worked but as soon as you unplug it and turn it back on again the light comes back on again ................. Any one found a salutation.
+Rami Jedidi According to your comment ( you can stop red light flashing for couple of minute. ) I have succeeded and resolve first problem and no need to (delete this rare video) thank you
شكرا جزيلا والله التجربة فادتني و الحمد لله و بارك الله فيك
الله يزيدك من فضلة استاذ احمد
I have an old hilti TE60 bought in a car boot sale for about $100
It has a theft protection system light on that stops it from working and I have no fob key to activate it.
I don't want to go to hilti as they charge a lot of money.
Any suggestions before I throw it to the bin?
ابتكار طريقة لتصفير وإعادة تشغيل الدارة الرئيسية المعقدة المسؤولة عن تشغيل نظام عمل الكسارة الهيلتي موديل TE1000AVR فخر منتجات هيلتي الالمانية
Innovating a way to reset and restart the main circuit complex is responsible for operating the system work Demolition breaker Hilti Model TE1000AVR, the pride of the German Hilti products
visit us on website www.npt.najeco.com
عندي هيلتي موديل te706avr مزوده بداره الكترونيه بلداخل .لما اشغلها يشعل الضو الاحمر بلأعلى وماتشتغل .فكيتها وماعرفت سوي اي شي .ممكن المساعده
رقم الوتس اب عندي 00971506645459 ولك الشكر الجزيل
I have taken out wires to repair blue wire from connector and forgot where it came out. Would you please let me know where to they go in connector
When you hover over the red lamp with the laser, the lamp goes out and after some time it lights up again. What to do ?
Hi, what about TE 3000 AVR, I have the same issue, I turned off the red light with laser, but I couldn't make it work. Is there a different way to fix that or something I ignored.
Şenol Kaytanlı
no, you have done all you can do , they work at the same principle they have SR motor ( switched reluctance motor ) i think there are problem in the way of work because there is a lot of electronic element in the main board and when the breaker get working , the electric elements separated from it's places , and the selecon material where but on the board , prevent you to fix any thing so it big mistake and Hilti ignore that .
thank you again
Ahmed Jehad Najeep a
Eliminate the circuit board and connect it cable cord to the switch. It will work
@@davidram1974 do you have more info how to do that plz
www.youtube.com/@HILTI.Pakistan
I can provide you if you need hilti srt device unlock all model hammer drill electrics card
السلام عليكم ورحمة الله وبركاته
اخي ممكن طريقة صنع جهاز اعادة تشغيل الدارة الرئيسية
hello, where can I find schematic board , You provide?
thanks for this informational video but i kind of did'nt get what u did there... all i understood was u pinted the laser at the red light and u reset it.... so if its that simple, do you really need to open the tool to do what u did or can u do it with the tool closed up and point the laser at it from the outside? Looking forward to hear from you. thanks
+Mouad Rachidi
Welcome Mr.
I will answer your question: ( do you really need to open the tool to do what u did ) I have been working in the maintenance center, and when the customer brings his machine, in order to repair it, we dismantle and analysis of faults in it, and in any case I will soon upload video on TH-cam, explain the method and system work fot TE1000 AVR , and please visit our site maintenance, in order to understand my intention and my goal of video publishing
www.npt.najeco.com
do you work on wacker eh65 hammers
عندي هيلت نفس الموديل فية مشكلة في القطعة الاكترونية كيف اقدر افحصها
Si funciona, yo tenia un te60 y el único problema que tenia es que se había dañado el cable de corriente, todo lo mecánico estaba en perfectas condiciones, solo le pase el láser y funciono.
gracias
Broder tengo un th 3000 ya lo hice y nada espero me ayudes urge
@@manuelbriceno4051 lo boy a intentar yo tengon un t500
@@edwinponce1 que tengas suerte bro!
A mi no me funciona
i had the same problem and i also tried solving it with a laser annd it worked aslong as it is still plugged in. as soon as you unplug it and replug it again the light goes on again and have to laser restart it again.
i have same problem did you find a salutation ???
@@syte7544 hello did u find salution?
www.youtube.com/@HILTI.Pakistan
Available here it's salution
thanks sir for sharing such rare information, however can you tell me which kind of laser light is required to reset circuit board of TE1000AVR.
+Ravi Kumar Banshiwal
any one red
thank you
www.youtube.com/@HILTI.Pakistan
www.youtube.com/@HILTI.Pakistan
Hilti unlock device SRT reset tool available here connect with me on this number
@@muhammadfarook www.youtube.com/@HILTI.Pakistan
It worked for me, but what I had to do was to take the laser and point it across the opening back and forth. The light shut of right away.
Dan Nordoff can you explain a little more about the presses you did ?
can you explain???
How to reset red light on TE 905 ?thx
Does anyone know where I can get parts for a HIlti TE 805 demo hammer
how does it work on Hilti te70?
OLÁ AMIGO EU FIS COM UM LESE DESSE MESMO JEITO AI EM UM DO MESMO HILTI TE 1000 AVR, SÓ QUE FUSIONOU E DEPOIS PAROU NÃO QUIS FUSIONAR MAS NÃO,O QUE SERÁ QUE PODE SER ?
Boa noite amigo e o seu comentário eu estou com uma máquina dessa mesmo com esse mesmo problema fiz mesmo procedimento aí do vídeo com laser e nada foi resolvido não consegui êxito nenhum encontro com a máquina parada e a placa não tem possibilidade de recuperar ela porque dá é coberta com a Regina plástica não sei ponto a máquina parada e uma placa dessa muito cara ele funciona ou também fiz com LED e acendeu as luzes apontei o laser na direção do EDGE funcionou e depois parou não funcionou mais souber de algum resultado aí você fala para mim valeu obrigado aí uma força
MUCHAS GRACIAS, ESTUBO MUY BUENO EL VIDEO, COMPRE UN HILTI 3000AVR Y OJALA NO ME APAREZCA ESAS LUCES ROJAS, Y SI APARECIERA ESAS LUCES PROBARE SU ENSEÑANZA....MIL GRACIAS.
Que hiciste con el 3000 yo tengo con luz encendida y no funciona el truco. espero me puedas ayudar
www.youtube.com/@HILTI.Pakistan
Hilti unlock device SRT reset tool available here connect
Asslam o alaikum brother i m also working in a tools service center can u tell me plz where do i find the control board of te 1000 avr i have 12 piece to repair help me out please ,thanks
the good gear system and where the piston goes uses oil or grease on a hilti TE_1000_AVR
WORK WITH THE TE 70 ATC ??
www.youtube.com/@HILTI.Pakistan
Yes and connect with me on this number
how to get around hilti tps ?
How to reset red light on TE 905 ? TKS
Estimado, soy de Argentina y tengo un problema con el martillo Hilti TE-706 AVR. El fallo es que al intentar encenderlo intenta arrancar y se para (la mecanica esta en perfectas condiciones) luego enciende la luz de servicio. Muchas gracias desde ya, saludos cordiales Simon Herrera.
Dear, I'm from Argentina and I have a problem with the Hilti TE-706 AVR hammer. The fault is that when trying to turn it on it tries to start and stops (the engine is in perfect condition) then turns on the service light. Many thanks from now, best regards Simon Herrera.
buenas tardes como estas ese aparato es un laser comun
العملية ضبطت معايا بس ما اشتغلت ايه هو المشكل؟
DO U KNOW HOW TO ٌُReset And Restart the basic electronic circuit FOR TE 706
you welcome
i think it's the same way That you see in this clips
Ahmed Jehad Najeep I've done what is in the video, but when I unplug the power supply and I switch back on, turn the red light
This means that the fault in the main circuit and not in the reboot circuit and in this case you have to change the main circuit, and nothing to do but change the main circuit
good luck
+PERFECT TOOL RENTAL & REPAIR INC.
its the same
thank you
Marco, were you able to reset your 706? how? I have one with the same problem as yours
hallo I am from kosovo
I servising hilti
watched the video hilti TE1000 avr
all hilti valid for a lazer to the code
or only for the 1000avr hilti
please help me
+Liridona Terstena
I will send you to schemes for Hilti breaker by e-mail
Send me your email address to communicate
thank you
Email : dona.gazi.87@gmail.com
Thank you
+Liridona Terstena
it work with many model like te706avr
so the test is better way to insure
the service indicator/light is an indication that your tool needs serviced not that the light only needs reset. would you do that with your car...no. send the tool to hilti for a professional repair and you will get a warranty with the repair. Yes you will reset the light but your tool will only lack performance and lead to a more costly repair in the future. this guys tool in the video really needs a repair or service.
it can not possible to reset the tool Hilti breaker with any "red light". And if you see that man shown not only one video but it compiles two videos of Hilti breaker
www.youtube.com/@HILTI.Pakistan
www.youtube.com/@HILTI.Pakistan
Hilti unlock device SRT reset tool available here
i have same problem and i also tried solving it with a laser and it worked but as soon as you unplug it and turn it back on again the light comes back on again ................. Any one found a salutation.
hello, What power for the laser, please?
I think if you can get lazer pen with 1mw power and 630-680 nm it's good enugh
OK thanks ,I'll try on a 70 atc
Did it work?
صديقي بتزبط على كل الانواع هاي الطريقه
good
Ananthraj Raj did it work?
مش عارف ايش بدّي احكي
chokrn
HI DON'T WORK ON HILTI TE50
you can stop red light flashing for couple of minute. Ok but you can't reset the TE 1000 with this china laser delete this rare video
+Rami Jedidi
According to your comment
( you can stop red light flashing for couple of minute. )
I have succeeded and resolve first problem and no need to
(delete this rare video)
thank you
buenas tardes como estas ese aparato es un laser comun