Suggested Design: 15SW100 / DCX464 / ME464 Point Source
ฝัง
- เผยแพร่เมื่อ 1 ก.ค. 2021
- Shortly to be released: a new suggested design showcasing our ME464 half-meter wide 300Hz horn, DCX464 wide-bandwidth coaxial compression driver with FB464 passive crossover, and 15SW100 woofers. This is a three way point source, requiring two channels and some basic processing to realize 40Hz - 18kHz response at extreme output levels with excellent directivity control to below 300Hz.
Thanks to Eighteen Sound’s Francesco Mazzini for the design, realization, and preset work! Expect to see this on the B&C website around the end of July 2021. www.bcspeakers.com/en/resourc... - วิทยาศาสตร์และเทคโนโลยี
![แฮงแงงแฮงงาม - บอย ศิริชัย [OFFICIAL MV]](http://i.ytimg.com/vi/vCGJTy9ZeP8/mqdefault.jpg)
Awesome! Really good speakers indeed. 👍❤
fantastic sound. Respect!
Would really like to see more prototypes design videos like this. Thanks Bennett
….Love the credits by the way haha 👍
That's awesome! Maybe collaborate with Bobby Gately at Gately Audio to create a flat pack cut and drilled enclosure to complete the package for the consumer that not a woodworker!
love it . well played
When I saw the pictures yesterday I thought those woofers were 12"!
Me to ....
to today :)
A stunning speaker. Any idea what slope is the crossover?
hi, excelent video, i want to know if u have a video for a 18 ipal to exterior use, i will apreciate!!
that's great, have you done the triple 18" bass bin on their website?
Simply amazing what the max spl
and please what is you're preferred method of making the eq and crossover settings what products or programmes do you use please c
What you think of paaring the DCX462 with two 15BG100 in a sealed box? Crossed at around 350-400hz. Seams good for me for home hifi/home theater use with linkwitz down to f3 at 31,25hz for good inroom response at my location. No high spl needed but effiency desired.
Can a novice speaker builder do this? How do I go about building this beautiful beast 😊?
Great Speaker! Which song is it?
Hi Bennett, it's amazing box! What amplifier would you recommend for DCX 464 section?
Very good question
I use the powersoft 304T
which amplifier do you using? How much power should the amplifier have?
tnx
LOL those 15s look puny in front of that horn. I was thinking those are 8" or 10" mids at first.
21s would look much better to partner that beast.
why distinc volume for the speakers ? lot of volume lost behind the horn
can be angle more the speaker and use the full volume ? why 10deg on the cabinet ?
the side handle are centered, but i bet the center gravity is strongly on front of this handles...
would it be possible to substitute the 15s with 21inch drivers ? this would be for a static build not being moved around all the time
21s won’t play mid frequencies well
21" could work. The DCX compression driver goes down to 300hz recommended. It can go lower with less output. So if the 21" can do 300hz it should be able to work....
You can array it? ...
Its Avaliable for África ??? Who can buy ?
B&C speakers and Eighteen Sound are related?
B&C is the parent company.
too cool! thanks I want live levels for stereo. So I am looking at pro drivers all the time. Am I wrong? or Dumb? Help a man out please and this video is a great suggestion and exactly what I think I need. I spent 25 years doing live sound, and there is nothing like the dynamics of being on stage ( or at monitor mixer) I've been chasing that high for years now that I'm retired. no home ( like my tekton) speakers I have tried have the headroom. They are delightful yes, but fall very short on volume from dome tweeters. NO fault to Tekton, again they are awesome to behold, and are very detailed and dynamic. But what they lack is that instant Suprise you get from a wedge turned up loud that makes your ears tickle and your eyes blink. When it slaps you louder than you thought anything could. Suprise from dynamics? you ever had that? almost scares you? I wont have 8000 wt amps but with the old QSC amps I have from 20 yrs ago should I still expect the driver improvements to be substantial? My woofer are JBL 2241 and 2206 but still play. but not hifi at all. are these on the b+c website?
Is the LF-driver angling critical , regarding timing or dispersion?
I wouldn't say critical. Depends on the acoustical crossover decision. It expands the HF flare and takes less space heightwise for sure.
It's to get the acoustic centers closer together, also it doesn't hurt to make the box a bit shorter!
Do they have drawings for the cabinets?
The drawings are on b and c website under suggested designs components are not cheap but worth it as a pair can do damage 😀
You need to build a pair of ROAR18 to give some real power in the bass and midbass to complement that nice top system.
I feel like the extension down to 40hz isn't necessary? Why even mention it doesn't need a subwoofer?? Who would possibly need/build this box without having a half dozen decent subs to pair it with? Seems like you'd be better off doing like 80-100hz+ and squeezing out every last drop of sensitivity considering it's obviously going to be used for live sound and not home use. I know there was talk about this waveguide+coaxial being paired with 15NDL88 what was main reason for driver change to 15SW100?
Hey Rhys, the cabinet has to be pretty big anyway, and the ME464 has enormous output. I wanted very tight low frequency capability, the good extension comes more or less for free since there's no problem putting enough port in the box. The 15SW100 is an outstanding LF performer and very low distortion at high excursion thanks to its split coil design. The 15NDL88 is a lot lighter, and better above 600Hz, but wouldn't give that same "hammer of God" feeling you can get from a box this size. I don't like separate subs except as an effect, and I'm not convinced the sensitivity would be much better even losing an octave of extension, so it's a matter of personal preference I suppose!
@@bennettprescott Thanks for the response, it's a cool box and a great use case for that ME464, hopefully i get a chance to hear one of these monsters someday soon!
I mean, I wouldn’t mind a pair in my living room….
Amazing Bennett, sending you an email about a personal project soon. Hope you can help me :)
Is this biamped?
I know that's supposed to sound great, but it sounds like a pair of cellphone speakers to me.
Oh wait...
This is TH-cam sound ie crappiyoska fidelity & political & medical propaganda - don’t go to McDonalds for health advice 💊
How the hell can you think you can array a 80 degree dispersion horn
Well.. You can reach to 40Hz, but at the same time you get a megaphone sound. There is no free cheese.
nice masks hagaha
Silly face nappies
What is the horny sub below?
Got it… 21inch horny bandpass 😬
Those speakers make a lot of dust.. audio with a mask...
Face nappies, full of shift.
Once again, oblivious to radiation pattern. All sound directed straight ahead in your face.
This is so ridiculous.