The problem is that this new version of the Storm uses controller that uses shit parts from China (operation managed by a Brazilian civilian criminal) similar to the new Storm Limited. The parts come from the same source for building these controllers. The controller will burn out in about 5~ 6 months. I suggest you look for Dualtron Thunder 3, Ultra 2 Upgrade, and X Limited. Ultra 2 Upgrade has the most well-built reliable controller as they were redesigned from scrach from a completely different source. They also handle highest power without overheating problem the other ones have during heavy use.
@@SEN100N I get information from God. And see what the criminals underground are doing, criminal activities. Yes, Teverun 7260R has controller problems too, killing the motors slowly. Here is the email I sent to Teverun: Hello, About the Teverun Fighter Supreme 7260R, God told me that it does not use true 2500 watt motor each. It actually is 1000 watt per motor, 48V part, not 72V, overvolted and over amp'ed to run with that system, which will hurt reliability (but doesn't matter because the motor is dirt cheap) of the motor and affect the top speed. You should've used genuine 3500 watt 72V motors. The way this scooter is configured right now, will run 57.x mph true speed (not GPS speed as many of them have been altered to read higher speeds) with a 200 lb rider standing up position in a neutral weather with 0- 3 mph wind. God also told me that this controller too has tendency to take out the motors after a few months of daily use. Even more disturbing part is that the battery (Samsung 50S) in this scooter is not able to handle 5A charging safely, as it will quickly degrade/deteriorate and lead to premature failure. God told me that it can safely withstand charging at under 1A for this battery without any future degradation. Samsung 50E and G are the similar way. Same for the LG M50/M50T. And please don't use Molicel P42A or P45A or B, they are even worse, made like glass, more fragile to break when put to stress, more so on charging, can't handle 1A without any future degradation or breakage. You need to use genuine part (not the many many versions of fake ones) Samsung 40T. That will handle 10A charging safely, and has more storage despite the claimed Ah rating among battery brands/models. Please look into controllers that will function safely without taking out the motors, and use the right battery for the scooter for dependable longevity use.
My controller of Thunder 2 and also Victor burned after 3-4 months, overheat transistors.. they started developing some shitty things in Dualtron omg...
@@W_1_3_7 It's the criminals that run operation underground doing this, by sorting out poor leftover garbage materials and have different companies in China to have controllers put together for customer needs. High purity metals including silver and gold are kept for their needs. Most management people in Dualtron don't know this except for the very high up who own this company.
My Dualtron New Storm Limited had its controller burned after I downgraded P5 setting from 3 to 2 (75% torque) and put it in Eco mode (while I was riding on the embankment with lots of people). It was a hot day, but not the hottest. Controller temp was 39 when I left ft the cafe. The controller burned in about 1 kilometer after I reconfigured the settings. All the rest of the time I was riding at 4 speed (it works better than 5 for some reason) in Turbo mode with P5 = 3 (100% torque). Mad controller temperature was 51-52 C. So it burned for no apparent reason. Now I’m waiting for the new controller from AliExpress.
@@Jemimah90 Are you smoking something?.. It will only go 43.3 mph what God told me. That's based on a 200 lb rider standing up in neutral weather calm 0- 3 mph wind.
The problem is that this new version of the Storm uses controller that uses shit parts from China (operation managed by a Brazilian civilian criminal) similar to the new Storm Limited. The parts come from the same source for building these controllers. The controller will burn out in about 5~ 6 months. I suggest you look for Dualtron Thunder 3, Ultra 2 Upgrade, and X Limited. Ultra 2 Upgrade has the most well-built reliable controller as they were redesigned from scrach from a completely different source. They also handle highest power without overheating problem the other ones have during heavy use.
Hello, where you get this all informations ? How you know that ? Is Teverun Fighter Supreme Ultra or Teverun 7260r have this controller too ? Thanks
@@SEN100N I get information from God. And see what the criminals underground are doing, criminal activities. Yes, Teverun 7260R has controller problems too, killing the motors slowly. Here is the email I sent to Teverun:
Hello,
About the Teverun Fighter Supreme 7260R, God told me that it does not use true 2500 watt motor each. It actually is 1000 watt per motor, 48V part, not 72V, overvolted and over amp'ed to run with that system, which will hurt reliability (but doesn't matter because the motor is dirt cheap) of the motor and affect the top speed. You should've used genuine 3500 watt 72V motors. The way this scooter is configured right now, will run 57.x mph true speed (not GPS speed as many of them have been altered to read higher speeds) with a 200 lb rider standing up position in a neutral weather with 0- 3 mph wind. God also told me that this controller too has tendency to take out the motors after a few months of daily use. Even more disturbing part is that the battery (Samsung 50S) in this scooter is not able to handle 5A charging safely, as it will quickly degrade/deteriorate and lead to premature failure. God told me that it can safely withstand charging at under 1A for this battery without any future degradation. Samsung 50E and G are the similar way. Same for the LG M50/M50T. And please don't use Molicel P42A or P45A or B, they are even worse, made like glass, more fragile to break when put to stress, more so on charging, can't handle 1A without any future degradation or breakage. You need to use genuine part (not the many many versions of fake ones) Samsung 40T. That will handle 10A charging safely, and has more storage despite the claimed Ah rating among battery brands/models. Please look into controllers that will function safely without taking out the motors, and use the right battery for the scooter for dependable longevity use.
My controller of Thunder 2 and also Victor burned after 3-4 months, overheat transistors.. they started developing some shitty things in Dualtron omg...
@@W_1_3_7 It's the criminals that run operation underground doing this, by sorting out poor leftover garbage materials and have different companies in China to have controllers put together for customer needs. High purity metals including silver and gold are kept for their needs. Most management people in Dualtron don't know this except for the very high up who own this company.
My Dualtron New Storm Limited had its controller burned after I downgraded P5 setting from 3 to 2 (75% torque) and put it in Eco mode (while I was riding on the embankment with lots of people). It was a hot day, but not the hottest. Controller temp was 39 when I left ft the cafe. The controller burned in about 1 kilometer after I reconfigured the settings. All the rest of the time I was riding at 4 speed (it works better than 5 for some reason) in Turbo mode with P5 = 3 (100% torque). Mad controller temperature was 51-52 C. So it burned for no apparent reason. Now I’m waiting for the new controller from AliExpress.
Owww.love it.What is the nome of that song you have on the video man??????.
Ciao bellissimo quanto costa 😂e che velocità range?!
Combien de Klmh?
Mileage around 160-180km
@@iWheelStore merci
need one
Nice 👌
Top Speed please ?. Thanks.
189km/h
@@Jemimah90 Are you smoking something?.. It will only go 43.3 mph what God told me. That's based on a 200 lb rider standing up in neutral weather calm 0- 3 mph wind.