Well done video. I am just doing my 2008 as we speak. Question. Did you notice that the new LED fit looser or not as snug in the OEM housing? The halogen originals fit more snug. Hope mine don’t fall out. Seek loose. I used Morimoto LEDs Last question. You mentioned you don’t like using LEDs on park signal bulb? Any reason why? LED should be less heat
The fitment was a little sloppy but as with many aftermarket products. I do like LED marker, but LED turn signals can require resistors or solid state flasher so I'm less crazy about those.
@@paulkelley86 i see what you mean. I installed LED. Look great but Those signal lights are faster than OEM halogen now. Change back or wire in resistors? Thoughts? Would same thing happen installing in Rear LED in tail signal and brake lights?
@daveholte7658 it really is only a concern for turns. Other lights no issue. Look up what is available for your specific car to slow down "hyperflashing" and you will find something plug and play.
Your High Beams are misaligned!. I did the same thing!. you need to to either adjust the housing by removing the 3 safety hex screws or pull the collar off the light and find the correct position and re-drill a new hole on the plastic collar with it removed from the light. I chose to remove the plastic collar and find the correct 9 o'clock and 3 o'clock position should look like this 9oc ( I ) 6oc. the beam was way better after fixing it!!. The more expensive led's with fans come with an adjuster on the collar these do not!!.
Installing these exact lights, the box didn’t say which was high and low.. thanks for explaining!
Well done video. I am just doing my 2008 as we speak. Question. Did you notice that the new LED fit looser or not as snug in the OEM housing? The halogen originals fit more snug. Hope mine don’t fall out. Seek loose. I used Morimoto LEDs
Last question. You mentioned you don’t like using LEDs on park signal bulb? Any reason why? LED should be less heat
The fitment was a little sloppy but as with many aftermarket products.
I do like LED marker, but LED turn signals can require resistors or solid state flasher so I'm less crazy about those.
@@paulkelley86 i see what you mean. I installed LED. Look great but Those signal lights are faster than OEM halogen now. Change back or wire in resistors? Thoughts? Would same thing happen installing in Rear LED in tail signal and brake lights?
@daveholte7658 it really is only a concern for turns. Other lights no issue. Look up what is available for your specific car to slow down "hyperflashing" and you will find something plug and play.
Hi, how to invitate you to test our third brkae light for 07-13 Silverado
Your High Beams are misaligned!. I did the same thing!. you need to to either adjust the housing by removing the 3 safety hex screws or pull the collar off the light and find the correct position and re-drill a new hole on the plastic collar with it removed from the light. I chose to remove the plastic collar and find the correct 9 o'clock and 3 o'clock position should look like this 9oc ( I ) 6oc. the beam was way better after fixing it!!. The more expensive led's with fans come with an adjuster on the collar these do not!!.