Thanks so much for this! Because of your video, I was able to repair my tv for $23 CDN and save me from having to buy a new one. You sir, are a gentleman and a scholar. Thanks from Canada!
I really appreciate the time you took for making this kind of videos and all the money that I save just following your steps. I'm really thankfully for all the help that you do in this kind of videos Thank you very much.
Great video, I was able to repair my TV for around $30. It only took me a little over an hour in total while being careful and going slow. Works like new again! Thanks for your help.
Thought I did it correctly. Ended up messing up so many times and flipping the tv over that I cracked the main black screen in several places. Really should’ve just given it to guys like you. I’m never buying a Samsung tv ever in my life again. Great video though.
Nice work may God bless you brother. Any opportunity to work with you. Shouldn't you apply hot air flow on strips to remove them you can change led bulbs later
Hi, quick question, if I may? I am in the midst of replacing my edge strip LEDs as I had black shadows appearing on my screen after using the TV for a few minutes. I wanted to test the new LED strips before taking the old out as they are very tricky to replace. I connected the new leds to the existing power cables and turned on the TV. They lit up nice and bright, but then a few seconds later they dimmed for approx 20 seconds before returning to full brightness again. They did this repeatedly. I tried the same process with the existing (original) led strips just to confirm if this happened with them and they did the same thing. So now thinking the LEDS strips were not at fault in the first place. This feels to me like it might be a power issue instead? Any thoughts?
hi sir very good video in my case the above tv the half image is dark and the other halh illuminate normal i have led tester is possible to give from the correspond plug of tv voltages and test the led if really are burned there are 8 pairs of wires in this plug can you tell me please ? or else i must opened and i see its not so easy
I bought a replacement system board from you guys after years ago after all my HDMI ports quit working. The replacement board works fine, but on power up the picture is inverted and I have to flip it through the menus. Any idea how to fix this? The TV is a 65in LCD Element Electronics.
My Hisense 50R7E 4k TV wont turn on(black screen). The red led standby blinks twice then goes solid(keeps looping). When I shine a light in the dark at the screen, I can barely see the boot logo looping on and off. I've tried unplugging/ waiting 10 minutes, holding the power button down for a minute, and pressing and holding the reset button. I took the back panel off to check the capacitors and they looked fine. My multi-meter found that even with led cable connected or disconnected, the volts jump up and down. The cable going the main board seems to have correct voltage and is stable. If you have any suggestions that would awesome! Thank you.
Looks like you have big experience and you work very fast, but can't you be little bit more "gentle" :) I fixed a dozen tv-s by replacing backlight strips and individual leds (as customer asked) but you can never be careful enough when you must remove a panel and all sort of stuff between...
Thanks so much for this! Because of your video, I was able to repair my tv for $23 CDN and save me from having to buy a new one. You sir, are a gentleman and a scholar. Thanks from Canada!
Where did you buy the strips from? Thanks 🙂
Also interested to know your source for the LED strips…thanks. 🇨🇦
I really appreciate the time you took for making this kind of videos and all the money that I save just following your steps.
I'm really thankfully for all the help that you do in this kind of videos
Thank you very much.
Great video, I was able to repair my TV for around $30. It only took me a little over an hour in total while being careful and going slow. Works like new again! Thanks for your help.
I ORDERED THE STRIPS FROM HERE AND THEY ARRIVED IN 3 DAYS. GREAT CUSTOMER SERVICE TOO.
Where did you order them from ? I’d really appreciate it if you could help me out. Thank you
Thought I did it correctly. Ended up messing up so many times and flipping the tv over that I cracked the main black screen in several places. Really should’ve just given it to guys like you. I’m never buying a Samsung tv ever in my life again. Great video though.
Spent $848 on a 65in Samsung TV. Within two years LED strips went bad. Never buying another Samsung again.
Thank you so much for this video. Without you I could never fix my TV!! First time for me !!
Thanks to you I have been able to repaire my Samsung TV. Thank you very much from France 😉
Thank you for taking the time to make this video, helped me replace the LED's
Thank you very much, you saved me a lot of money to buy new TV or repair mu current one.
Thank you 🙏
Great video. I just fixed my TV with a huge black line running through it for $20.
Nice work may God bless you brother.
Any opportunity to work with you.
Shouldn't you apply hot air flow on strips to remove them you can change led bulbs later
Great tips 👍
Helped a lot! Thanks!
Hi, quick question, if I may?
I am in the midst of replacing my edge strip LEDs as I had black shadows appearing on my screen after using the TV for a few minutes. I wanted to test the new LED strips before taking the old out as they are very tricky to replace. I connected the new leds to the existing power cables and turned on the TV. They lit up nice and bright, but then a few seconds later they dimmed for approx 20 seconds before returning to full brightness again. They did this repeatedly.
I tried the same process with the existing (original) led strips just to confirm if this happened with them and they did the same thing. So now thinking the LEDS strips were not at fault in the first place.
This feels to me like it might be a power issue instead? Any thoughts?
I got a decent shock removing the white four part bezel at the bottom. I put on gloves quickly there after.
Excellent video, you and TampaTec are my go to specialists.
How many led straps are in un50nu7100f
hi sir very good video
in my case the above tv the half image is dark and the other halh illuminate normal
i have led tester is possible to give from the correspond plug of tv voltages and test the led if really are burned
there are 8 pairs of wires in this plug
can you tell me please ?
or else i must opened and i see its not so easy
I bought a replacement system board from you guys after years ago after all my HDMI ports quit working. The replacement board works fine, but on power up the picture is inverted and I have to flip it through the menus. Any idea how to fix this? The TV is a 65in LCD Element Electronics.
nice work sir
Thank you, dude!!!
Hallo Can u Teil me Please Witch Side oft reflector sheet comes.only Theater First sheet.
My Hisense 50R7E 4k TV wont turn on(black screen). The red led standby blinks twice then goes solid(keeps looping). When I shine a light in the dark at the screen, I can barely see the boot logo looping on and off. I've tried unplugging/ waiting 10 minutes, holding the power button down for a minute, and pressing and holding the reset button. I took the back panel off to check the capacitors and they looked fine. My multi-meter found that even with led cable connected or disconnected, the volts jump up and down. The cable going the main board seems to have correct voltage and is stable. If you have any suggestions that would awesome! Thank you.
@@dumboldoor pretty sure one of the leds died and the power board probably caused the problem.
Hi
The tool used, how much and name?
It's a Painter's Tool, found in any hardware store.
I have a random red line vertically down my samsung. What do u suspect is the culprit?
Hi! That would be either the T-con board or the LCD panel. Good luck and thanks for watching!
Need led backlight for model Un50nu7100fxza whole right side of tv just went black can you help me wish I could send you a pic of tv
This is the first and last time I will buy anything from Samsung.
where can I get a LCD TV POWER BOARD RSAG7.820.7299/ROH FOR HISENSE H55N5700UK please.
55 UF670T-TC screen flickring after few minutes what could be problem
Thanks a lot makinh such video
Looks like you have big experience and you work very fast, but can't you be little bit more "gentle" :) I fixed a dozen tv-s by replacing backlight strips and individual leds (as customer asked) but you can never be careful enough when you must remove a panel and all sort of stuff between...
Its worse now. Bright spota at bottom and rest of screen is dark. What did i do wrong ive redone this twice now and nothing has chancged
It's probably the control board.
Tools available for sale
gently please..
junk throw that in the dumpster your not going to fix that