I love all of your content. I dunno of many other channels that cover Mazdaspeeds but the ones that do don’t even come close to the depth you go into this platform. I assume you must own a mps6 at the very least. Anyways, I gotta say you’re absolutely killin it when it comes to decent, informative, and overall good quality content. Keep up the good work bro!
Thank you so much 🙏 you're right, a lot of mazdaspeed channels don't go that in depth, but there are some other real good ones too, Colton Richter, JJ MS3, spooling up, steven etc. I don't own a 6.... If I did own a 6, I'd probaly trade it for a 1st gen 🤘 ahaha. But really bro, thank you!
I was putting on my wheels today and after when I watched this I laughed. The 18x8.5 +35 is what I got lol just like the vid. I'm gonna have to roll n pull to make sure it doesn't poke too much 👌🏼
@@LifeOfTuners yep I should be good, I have front camber arms ready to go, and should be able to adjust stock rear camber when I get an alignment. Dial in fitment time
Really? I know there's that direflex Evo 8 lookalike wing, though I'd be curious to see if you're right, I know the new STI splitters bolt straight up to a speed 6
By the time I'm done with the preventive mods including strenghtening rear diff and wheels+tires and upgrading the brake calipers+rotors, retune the build long block, I'm left with a car looking the same like the day I got it.😁
Ahaha LMAO, with the brakes, their not bad from standard, but if you want it better, and more capable for track use, I'd just do new pads, rotors and brake fluid, possibly braided brake lines if you want better feel
Hey, i got a mazda 6 been looking at doing it up and came across your channel just wondering are all these brand recommendations trust worthy because i just dont know who to trust when it comes to buying mods
What is the best fitment (clean offset) with mazda 6 sedan 2.0? because i think the stocks wheel (215/50/R17) comes with 50@55 offset. Any idea to change other 17" wheels ?
Yeah, but if you for example want to do just the front bumper or lights for example, you have to swap the full front clip, bumper, lights, grill, bonnet, fenders etc
Honestly I feel like they can pull off what you want, whether you wanna go clean or aggresive. Personally I'd go with silver wheels not black, maybe even bronze, it's down to your style
I don't know too much about the N/A 6s, but 350k sure is a lot, though you'll find with a lot of high milage cars, that they just keep going, in short id say, you know the car, if you have to keep spending money on it, sell it, if it doesn't break a lot, you could keep it
Honestly, it depends on how much milage you'll do, the engines generally will blow up after about 125k miles, then it's new engine time, the timing chains and turbos will generally need replacing at around 95k miles, but they too can go all the way to 125k as well
Yeah, I think for sure side skirts should work and swapping to MazdaSpeed tail lights, plus a lot of the mods work for any car, tinting lights, black roof wrap, wheels etc
Bruh I can upload some 240fps vids if that's what your after 😂 but like fr most videos on TH-cam are in 30fps. And really there's no point to go higher, most the cinematics are shot at no more then 50fps (lower fps gives a more cinematics vibe, 24fps to be specific) And honestly, it still look good, plus it's quicker to edit and export, plus people with poor internet connections have less buffeting Whats PAL btw?
For more mods for ANY Speed 3 Or Speed 6, I've made a whole playlist for this 🙏
th-cam.com/play/PLdwOkgxzLHsQGQBXaQdHL0CrUwY_krI6q.html
The red one with the tinted lights at 2:30 is my car! Thanks for the feature
Oh yo nice! She looks real good!
I love all of your content. I dunno of many other channels that cover Mazdaspeeds but the ones that do don’t even come close to the depth you go into this platform. I assume you must own a mps6 at the very least. Anyways, I gotta say you’re absolutely killin it when it comes to decent, informative, and overall good quality content. Keep up the good work bro!
Thank you so much 🙏 you're right, a lot of mazdaspeed channels don't go that in depth, but there are some other real good ones too, Colton Richter, JJ MS3, spooling up, steven etc. I don't own a 6.... If I did own a 6, I'd probaly trade it for a 1st gen 🤘 ahaha.
But really bro, thank you!
Keep bringing it bro. Love the content.
Sure will mate, glad people like it!
I have a mazda 6 and I fell in love with it the second I got in it....💞
Mazda knows what's up
I like the fast and accurate delivery👌👌
Chur boss
Bro THANK GOD you didn't suggest "chromies for the homies" I was about to just close the video looool
ahahhaha 22s with spinners pls
I've bought the Black five spoke RX8 wheels, they look very nice under a Speed6.
they really do
I was putting on my wheels today and after when I watched this I laughed. The 18x8.5 +35 is what I got lol just like the vid. I'm gonna have to roll n pull to make sure it doesn't poke too much 👌🏼
Ahaha what a coincidence, from what I've heard and seen it should be allgood with just rolled fenderz
@@LifeOfTuners yep I should be good, I have front camber arms ready to go, and should be able to adjust stock rear camber when I get an alignment. Dial in fitment time
That should be awesome bro
Good I like this
That is good 🙌
Love this vid!
I have a black speed 6. Most of these mods only look good on the grey/red ones :(
Id either with a black and white theme or just murdered out
My black speed 6 is black and wheels are bronze. Everything else is murdered out
apparently the evo 8 wings can go straight onto mazda 6's without any gaps. just drill holes, bolt it on and call it a day
Really? I know there's that direflex Evo 8 lookalike wing, though I'd be curious to see if you're right, I know the new STI splitters bolt straight up to a speed 6
@@LifeOfTuners I'm not certain but I've heard it from a few videos and pages
Huh that could be pretty cool, I don't think it'd look good but still
By the time I'm done with the preventive mods including strenghtening rear diff and wheels+tires and upgrading the brake calipers+rotors, retune the build long block, I'm left with a car looking the same like the day I got it.😁
Yeah :( though what's this with the wheels?
@@LifeOfTuners stock wheels need to go for a Brembos innit.😉
Ohhh I see should be nice 👀
@@LifeOfTuners This is a wat IF I got a Speed6. Its rarer than a virgin nun in my part of the country😁
Ahaha LMAO, with the brakes, their not bad from standard, but if you want it better, and more capable for track use, I'd just do new pads, rotors and brake fluid, possibly braided brake lines if you want better feel
Hey, i got a mazda 6 been looking at doing it up and came across your channel just wondering are all these brand recommendations trust worthy because i just dont know who to trust when it comes to buying mods
All of them should be pretty trust worthy, if you're questioning it you can look through the Facebook groups to see what others did
Another great video
Thanks mate!
Maybe you could also include Japan Racing wheels like the JR11
Damn there kind of similar to the xxr 527.
I'd say japan racing is good quality for reps
haven't seen those fortune flares yet and uhhh, yes plz i want
Yeah they're pretty new.... And pretty damn nice 🥵
What is the best fitment (clean offset) with mazda 6 sedan 2.0? because i think the stocks wheel (215/50/R17) comes with 50@55 offset. Any idea to change other 17" wheels ?
I'd look up the fitment industries gallary to see what others are running and how it looks to find a fitment you like
Great video ideas!
Thank you sir 🙌
I plan to buy the Mazda 6 sport sedan 2004, and i really love MPS6, so i was wondering if i can make it look like the MPS6
Yeah you can, side skirts, front fenders, both bumpers, both lights, spoiler, bonnet and wheel should be the majority of it
@@LifeOfTuners So pretty much 1st gen of mazda 6 will work with the MPS6 since they are both 1st gen
Yeah, but if you for example want to do just the front bumper or lights for example, you have to swap the full front clip, bumper, lights, grill, bonnet, fenders etc
@@LifeOfTuners mainly rear front and side
well actually its mainly the rear that I want to change
What kinda theme do you think would look good on a Black Cherry Mica?
Honestly I feel like they can pull off what you want, whether you wanna go clean or aggresive. Personally I'd go with silver wheels not black, maybe even bronze, it's down to your style
4:00 where this roof reling I buy?? Please link
How you going to use my car as the cover photo... and change it to purple...
Ahahaha she is gorgeous, just changed to purple to get more attension 👀 since they never came in purple
whats name of this first rear diffuser??
I said in the video right
Should a owner keep his mazda 6 if its over 350000 km on the clock?
I don't know too much about the N/A 6s, but 350k sure is a lot, though you'll find with a lot of high milage cars, that they just keep going, in short id say, you know the car, if you have to keep spending money on it, sell it, if it doesn't break a lot, you could keep it
Yeah that good advice
Would a speed 6 survive in the next 10 years?
Do u have one?
Honestly, it depends on how much milage you'll do, the engines generally will blow up after about 125k miles, then it's new engine time, the timing chains and turbos will generally need replacing at around 95k miles, but they too can go all the way to 125k as well
Do you have a link for any of the hoods?
Nah sorry, if you search up the brand name, it should all come up
@@LifeOfTuners I found it. It was under ms3 but it's an MS6 hood. Thank you
@@noahlehman1408 ahh right, glad you found it
Do you have parts for normaal mazda 6 too?
I haven't done a video on that
What about a normal one? A diesel at thatt
A lot of parts would fit I'd assume
@@LifeOfTuners I think so too just not sure which ones
Yeah, I think for sure side skirts should work and swapping to MazdaSpeed tail lights, plus a lot of the mods work for any car, tinting lights, black roof wrap, wheels etc
I got those custom type headlights
Ohhh niceeee
you fr sound like noahsnoah from fortnite
Ahaha I'll have to go check him out 👀
You know this is a PAL video when the uploader can only upload in 50fps 🤦🏾♂️
Bruh I can upload some 240fps vids if that's what your after 😂 but like fr most videos on TH-cam are in 30fps.
And really there's no point to go higher, most the cinematics are shot at no more then 50fps (lower fps gives a more cinematics vibe, 24fps to be specific)
And honestly, it still look good, plus it's quicker to edit and export, plus people with poor internet connections have less buffeting
Whats PAL btw?
Trash tuners 😂