My dad and I got this kit for his ml63 and got stuck a few times at install not knowing what to do next, we contacted Francisco and he was so unbelievably helpful, he helped us pretty much anytime of the day and even night ! He knows a lot about these installs! Can’t thank him enough!
Just got my kit installed in my 2014 ML550. What a nightmare haha. It’s almost the same as the GLE except Had to run the RGB wires through the door jamb Oem wire connector. That was half the job right there. Thanks for the video. I couldn’t have done it without this video for reference.
Thank you so much for this Clip. Its help me very to install the Kit. And one Very Very Very Big Thank to you 🙏🙏 He is very Helpful and know what he do💪💪🙋♂️🙋♂️ Best Greets Francesco
Thank you very much for the comprehensive video!! Tomorrow I will proceed with the installation, wish me luck 😬 ... Have you uploaded the OBD configuration video yet?
Hi mate. Just wanted to say a huge thanks as this video helped me install on my w166. However its stuck on red and i cant change using the steering controls. Also when plug in computer it says ambient light fault. But its working, unfortunately stuck on red
Brother. I have a 2014 ML with no original ambient light. I would like to have one installed and live on NYC, do you know of any EFFICIENT shop I can get this installed? Had one shop do my X5 and totally fucked that up. Don't want to take a chance with another shitty shop. Any help you can offer is appreciated
Hey man! The only place I know in the North East is Boston Mechanics. Might be a drive for you, but they know their stuff. www.boston-mechanics.com/?fbclid=PAAabA0mfAFCWHhSP4sqHlz2fLdHyKHnXopSaRNQrw8EgIIo4-2fOX2srNyxQ_aem_th_AUpouaEu_zoC_25M3veDBFiSyDZgrw4XeQGgLZdER2K0VkfHBm8prgAsHN4rZWLmRZg
Hi, I have questions for you, 1- i couldn't get how you fed the dash trim lights🤔 the kit only has 4 modules one for each door right? I saw in the video that you are connecting the dash trim light to a new module? Please explain to me. 2- for the foot light (4 of them) they will be connected to one of the front door module right? Will the module hold that much capacity? 3- when are you going to upload a video on how to program the command for the new 12 colours? Thank you 👌👍
Hi! In US GL became GLS in 2017. Not sure if that is different in other countries. Where do you change your colors now? In the cluster or on the screen? If in the cluster, yes. If on the screen, such as the GLE in the video, you will need to program.
Hi Don! Sounds like you got the kit that requires you to run the dash light harness through the passenger A pillar/door boot and plugs into the same module the door uses. You will need to add some pins to the connector between the A pillar and door.
@@dusaintel no need and I would never recommend that. There are extra pin slots in that connector that will allow for the addition of said pins. Your kit should have come with some and if it didn’t, CKM has done you a disservice. Contact him about this. He is usually pretty good about replying.
@@iconam9283 you are a life saver. I did contact him snd he did reply+clarify it. Will install the kit and and after i code it with DAS hopefully it all will works great.
@@dusaintel you’re welcome! Happy to help. Before you put all your door panels back on, please verify with him that dip switches are set to your specific model. Because these kits can be used with various models, it is important to set each module or the “master module” to the correct setting. Your kit might be different, but doesn’t hurt to ask just in case.
I want to ask you , are the dip switches on those small boxes the same on the ML w166 as in your Gle w166 , and do I need to code at the end to work or just is plug and play , by the way thanks very helpful video 👍🏻
Thank you! Yes, the OBD module is used with an App called WeChat. It is all in Chinese so navigating the app can be tricky, but if you have a tablet or another phone, you can open Google Lens to translate. The seller will provide further instructions
Thanks for the Vid. I'm going to upgrade the speakers too, kill two birds with one stone. The Harmon Kardon Logic 7 speakers are adequate but needs improvement.
Dude, Thanks for the video, i have a w205 and it helps me, but one question if you can advise me, i can switch 64 colors through orginal ambient lights menu using the knob but on the menu it shows only the 3 original colors ( Polar, Solar, neutral) thanks 🙏
Hi there! You must flash your COMAND unit to unlock full color spectrum. This is done with OBD module and a mini app on We Chat App. Who did you purchase your kit from?
@@daveiga4u yes, I apologize. I was obviously still asleep when I replied to that, lol. 2019 was a transition year to new body. Dealer will always say it isn’t plug and play because they don’t know anything about aftermarket. Message me on instagram and I’ll be happy to go over your options as I have for many others.
Hey! I want to install that to my car but my car hasn't ambient light from the factory, so I bought the trims with ambient light. Do you know if I need smth else to buy? Thanks!
@@theYujinsLessons1 ok, you will need to have the COMAND system coded to include the 12 color palette if you want to change the colors on the screen like the factory setup. Otherwise you can buy universal modules that you can control with an app on your phone
Hi, I recently installed a kit on my ML63. The doors are perfect, but my dash ambient lighting isn't turning on any longer. When I first installed it the dash ambient lighting was dim and it sometimes would be a different color than the doors when it was actually working. The abmient lighting would also flicker sometimes.. Now the dash lights dont seem to want to turn on at all. Doors are perfect and have continued to be. Could you give me some pointers? I added you on Instagram as well. Your video was helpful during my install!
I hate to hear that, man. Check all connections relating to the dash harness. Does your dash lighting have its own module? If so, it could be the module. I’ve run into that before. If you’re sharing a door module, but the door lighting is good, then swap connectors and see if your issue moves to the door.
I had an issue with the dash light being a different colour during the install, it turned out that on of the pins for the wire wasn’t pushed into the plug properly (the plug between door and cabin). Once o fixed this the problem was gone. I would check those pins as the modules in your doors are all working, it can only be the pins not connecting
Hello ,thank you for the helpful video , but how is the programming done , I have the module but no idea ? Is there any instructions ? Thanks in advance !
Thanks for the detailed video, I purchased this same kit couple months ago but Seller didn’t provided instructions and no shop wanted to installed them without instructions, after watching this I can do it myself but I am missing the canbus and power connection (the one with the fuses) should that be included in my kit or do I need to purchase that separately? Thanks in advance
Hey Alex! You're very welcome and thanks for the IG friend request. As for the CANBUS harness, what year is your w166? You're also welcome to message me on IG.
Thank you! Same process. I just learned a few days ago that this kit will actually work for ML as well, just have to set the dip switches to a different setting. I haven’t announced it yet, because I wanted to test it myself.
Hey, sorry for the late reply! You can omit that harness for the w212. The dash harness is to be routed through left front door and connects to that module.
Yes, but you will need to change the colors on the instrument cluster. It will only show 3 colors but if you keep scrolling, the colors will continue changing
Just found this amazing item on AliExpress. Check it out! $20.33 51% Off | For Benz ML/GL/GLE/GLS/CLS/E/S W166 W292 X166 W218 W212 W221 LED BO Tweeter Ambient Light Upgrade Atmosphere Lamp Update Set a.aliexpress.com/_mtfohXw
Im sorry, I never did. The process is confusing to most and requires the seller to send you an invitation to WeChat App. It is all in Chinese. I cannot endorse this process. Coding your vehicle is something that should be done with care as there is always the possibility of damaging your unit. Should the aftermarket streamline the process, I would be happy to produce an instruction video. Or at least make the app in a universal language. Google lens works well, but it becomes quite frustrating if you don’t have another device to translate in real-time.
😂 thanks! Yes, I totally agree with you. I did this video 2 years ago on a whim thinking I had time to create content so production left a bit to be desired. Should I ever find the time to make more videos with this amount of detail, I will definitely have one. And better lighting!
I did this same setup on my 2014 ML63 AMG and connected everything back but my passenger side mirror camera when going in reverse doesn’t work but it worked before I unplugged everything. Maybe you can help me on why that’s happening or maybe I missed something else didn’t connect ?
😢 did you happen to unplug the green or blue fakra connector coming out of the mirror? Make sure it clicks into place. Also, there is a separate connector or 2 that comes from the mirror. This supplies power to the camera, mirror, and blind spot detection. Make sure they are plugged in and maybe even make double sure all the pins are fully seated. Let me know!
I get power to it heated mirror paddle light signal works just not the camera. Maybe it could be that where the blue or green clip needs to be clicked in place very possible. I will check tomorrow fingers crossed I will keep you updated.
@@iconam9283 Hi so I got a chance to take off panel again and double check if camera was unplugged, I found nothing everything is in correctly I removed and clipped it back together same thing no different it probably died when I disconnected radio and everything else who knows. I found one on eBay for $200 I’m Going to buy it used 🤷🏻♂️ vs 700 new
Hi Tony, thanks for watching! For your 2013, you can order any kit made for the w212 or w218. Take a look on eBay. You won’t need to program because you currently change your colors on the instrument cluster. It will still only show you current 3 colors, but if you continue to scroll, it will continue changing colors. The seller I used to promote doesn’t sell the kit I’m referring to. Installation will be a little different, but overall, it is very similar.
Hey! So, you have 2 options. You can source the necessary trim pieces with acrylic tubes from a salvage yard, install the aftermarket kit, and then have someone code your vehicle to activate ambient lighting option in your instrument cluster (this step may not be necessary as you change the color by holding the "ok" button while using the "call" or "hang up" buttons. The second option is to purchase a universal kit from DMP or Ali and make your own using the supplied fiber optic tubing.
Thanks, very helpful I bought mine from elsewhere before I watched this and it had it today. I got a bit confused at the end where you put everything together at the front Dashboard. My kit just comes with 4 black boxes for the the doors and bunch of wiring for the front, is it possible that the front dash board doesn't need a black box?
Thanks, Emad! Yes, your kit probably requires you to fish the the dash trim harness through the left door and connect it to the “main” box. That’s how the ML kit is. Tell me more about your vehicle.
@@iconam9283Thanks for quick response, So I connect the front dash harness to driver's door black box? There are a lot of weird cables that I don't have any idea what they actually for. We will love to see you work on ML w166 in the near future
@@EM1-z7p yes sir! You’re welcome to chat with me on Instagram. If you send me pictures of what you have and more info, I can help you. You actually have a more simple kit. My insta is @icon_auto_mods
@@iconam9283 unfortunately I don't have instgram, however I did everything as you said and I tested only the rear doors after installing the kit, but nothing happened, the lights didn't turned on and I tried to change the light through the settings to different light but still no light. Do you have any idea what did I do wrong? I checked every connection and it was correct tried both rear door and nothing happened.
Hello Gregor! Thanks for commenting. I’m not sure I understand the question. Perhaps it got lost in translation. Please ask in your native language and I will translate. Thank you!
I didn’t. This customer requested that I leave the footwell lighting as is because when you replace the factory light housing with the ambient lighting, you lose the factory footwell illumination. That was more important to him. Granted, they would still illuminate in color, but he preferred the warm white lighting. Footwell lighting is easy though. The harness connects to the same harness/module as the dash lighting. Routing of wires is done through center console and down the sides of the transmission tunnel behind the carpet. Be sure to leave enough slack under the seat to allow for forward and backward adjustment of the seat. For a factory-like installation, remove front footwell carpeting and route wires through cable channels instead.
Francesco is incredibly helpful via Instagram and has a wealth of knowledge on these types of kits like I’ve never seen before. I would have been lost with out him so make sure you listen to what he has to say!!
Unfortunately, the seller no longer has them available. There are other kits available that require some re-pinning of one of the door connectors. Take a look at some of the comments and ask for suggestions. There are some good folks on here that I’ve helped. Good luck!
Can anyone help me? I'm trying to find the actual fuse for 2017 gls 450 ambient lighting fuse and cannot find it. My ambient lighting stopped working a couple days ago. I found the fuse boxes but don't know which one it is. P.S, will this kit work on my vehicle? Thank you all in advance!
@@bigwilito ok. Is your interior light switch on the overhead control panel in the middle or left position? And yes, this kit will work on your vehicle. You will need to code the COMAND unit to reflect all 12 colors.
@@iconam9283 That's what it was. The overhead lighting switch was not in the middle. Thank you so much for the help! You now have another subscriber 👍🏿
@@bigwilito you got it! Glad it was something simple. Started with the basics because unless you’ve been messing with the electrical, it is unusual to have a blown fuse. Thanks for subscribing!
Hello Jibran! I am located in Little Rock, Arkansas. I unfortunately am not very close to most people but I do have clients come to me from surrounding states. For more info, message me on Instagram!
I just checked and it does appear they are out of stock. I always keep a few kits on hand and would be willing to sell you one. You will need to purchase the programming module from them.
Thank you! The seller here in US does not have any in inventory. I looked on Ali Express and found this. Be sure to contact them and provide your vehicle information for compatibility. a.aliexpress.com/_mPXiEjs
@@iconam9283 you have after 5 months any problems or general issues with the kit? And how it’s with the brightness? Like day one? Thanks, I ordered too from AliExpress
2019 was a weird year so I didn’t include it in the range as the w167 chassis was introduced that year. Yes, it will work as long as you have a w166 such as the one in the video.
@@_yadav3000 sorry, I’m still a bit confused about the question so I will explain. 2012-15 ML350 does not need coding as the colors are changed in the instrument cluster. It will show solar, polar, and neutral but you will be able to continue scrolling and the colors will change. 2016-2019 GLE must be coded to unlock 12-color palette as the colors are changed on the COMAND unit. Regardless of year, if your vehicle has the factory ambient light option, all LEDs must be replaced as they are not designed to provide a wide spectrum of colors. The dashboard does not need to be removed, but dash trim, vents, climate control and COMAND unit must be removed. Hope this helps.
@@WaveyKat well, unfortunately the seller I used to get my kits from no longer has any in stock and I can’t get a hold of him 😔. You’re welcome to send me some links and I can make some suggestions for you. Follow me on IG and message me! @icon_auto_mods
@@iconam9283 thanks again for the video i installed my lights, installation was not hard but the pieces are very fragile and can break easy. got my coding done and works!
@@WaveyKat that’s great! Glad this was a good reference for you! And yes, parts can be fragile. I always recommend disassembly be done in a climate controlled environment. If too cold parts become brittle and crack. If too hot, you run the risk of distortion. Great job! What kit did you end up going with? Please share a link so others can benefit. Thanks!
@@Driverstein Brother, I don't know why that could be. Here is the direct link to this item. Only purchase if you are installing on GLE or GLS. We will list kit for ML at a later date. www.ebay.com/itm/184407698093?hash=item2aef8e2aad:g:5KEAAOSwAG1goJQg
@@just2crispy super bright! In fact, you might find yourself turning it down a bit. The oem is very dim and the 3 colors offered don’t make it any better.
@@iconam9283 this is all I need to hear. I am purchasing now. I wish you lived in LA for installation haha. Do you perhaps know of any place on the west coast that can install?
Hey Nick! Looks like Endless DIY is out of stock and have been for a while. If you do a quick Ali Express search, you will find some kits on there. Most of the ones I’ve seen on there only have 4 modules which require a little extra work as you have to pin one of the door connectors so that you can use a door module for the dash and footwell lighting. It’s not bad, though. I won’t post a link because I don’t endorse any products that I haven’t purchased myself or installed. Before you purchase, make sure the seller will support you as 2016+ GLE will require some coding. Please watch the video in its entirety and listen closely as I explain. This kit should cost you no more than $150-$200. I’m happy to help you through the install as I have many others. Tips are always welcomed!
My dad and I got this kit for his ml63 and got stuck a few times at install not knowing what to do next, we contacted Francisco and he was so unbelievably helpful, he helped us pretty much anytime of the day and even night ! He knows a lot about these installs! Can’t thank him enough!
Thanks man! Glad to make some new friends! Ciao!
@@iconam9283 Hi how to connect rear foot lights?
Just got my kit installed in my 2014 ML550. What a nightmare haha. It’s almost the same as the GLE except Had to run the RGB wires through the door jamb Oem wire connector. That was half the job right there. Thanks for the video. I couldn’t have done it without this video for reference.
You got it, brother! Congrats and it looks fantastic!
where did you purchase your kit from?
Hello. My car is 2013 ML250. I am gonna buy this product. Does the brightness get brighter?? Or just changed color?
Wheres the link for the kit? Help
How much was the kit?
Fantastic. I'm been on the fence about this kit due to installation. Gonna get it now because of you. Thank you.
Hell yeah, Quan! Thank YOU for watching and making my day!
Just want to say again a very big thank you!
You supported me via instagram the days.
❤️😀
Thank you so much for this Clip. Its help me very to install the Kit. And one Very Very Very Big Thank to you 🙏🙏 He is very Helpful and know what he do💪💪🙋♂️🙋♂️ Best Greets Francesco
Thank you for the kind words, Enes! Welcome to the Mercedes Community and I hope your W166 brings you years of enjoyment! Until next time!
Thank you very much for the comprehensive video!! Tomorrow I will proceed with the installation, wish me luck 😬 ... Have you uploaded the OBD configuration video yet?
AGAIN - What you are able to do with 1 hand is AMAZING!!! but it is difficult to watch :)
🙏🏽 always appreciate the feedback!
HI. My ML W166 2013 doesn't have ambient light as standard. they can be installed. Thank you
Did you ever make a video of programming
Awesome job I like your style o Keep up the good work
Thanks, Bill! Wish I had more time to upload some more content, my friend!
Hi mate. Just wanted to say a huge thanks as this video helped me install on my w166. However its stuck on red and i cant change using the steering controls. Also when plug in computer it says ambient light fault. But its working, unfortunately stuck on red
What year is your w166? Also, did you set the dip switches?
Brother. I have a 2014 ML with no original ambient light. I would like to have one installed and live on NYC, do you know of any EFFICIENT shop I can get this installed? Had one shop do my X5 and totally fucked that up. Don't want to take a chance with another shitty shop. Any help you can offer is appreciated
Hey man! The only place I know in the North East is Boston Mechanics. Might be a drive for you, but they know their stuff.
www.boston-mechanics.com/?fbclid=PAAabA0mfAFCWHhSP4sqHlz2fLdHyKHnXopSaRNQrw8EgIIo4-2fOX2srNyxQ_aem_th_AUpouaEu_zoC_25M3veDBFiSyDZgrw4XeQGgLZdER2K0VkfHBm8prgAsHN4rZWLmRZg
Thank you man.
Hi, how to connect rear foot lights?
Hi,
I have questions for you,
1- i couldn't get how you fed the dash trim lights🤔 the kit only has 4 modules one for each door right? I saw in the video that you are connecting the dash trim light to a new module? Please explain to me.
2- for the foot light (4 of them) they will be connected to one of the front door module right? Will the module hold that much capacity?
3- when are you going to upload a video on how to program the command for the new 12 colours?
Thank you 👌👍
U haven’t posted the coding process
Awesome job I like your style o
Hi. I have 2016 Gls X166. Can i change the colours without programming? I only have 3 colours now. Thanks
Hi! In US GL became GLS in 2017. Not sure if that is different in other countries. Where do you change your colors now? In the cluster or on the screen? If in the cluster, yes. If on the screen, such as the GLE in the video, you will need to program.
You rock! Thank you for the video.
Thanks, Andre!
hey whats up man still waiting on your video of the 12.3 screen install
I bought a kit from ckm designs. I get everything but i dont have the canbus and fuse connector? Do I have to have it?
Hi Don! Sounds like you got the kit that requires you to run the dash light harness through the passenger A pillar/door boot and plugs into the same module the door uses. You will need to add some pins to the connector between the A pillar and door.
@@iconam9283 is there room to trill through the connector to run those 4 wires?
@@dusaintel no need and I would never recommend that. There are extra pin slots in that connector that will allow for the addition of said pins. Your kit should have come with some and if it didn’t, CKM has done you a disservice. Contact him about this. He is usually pretty good about replying.
@@iconam9283 you are a life saver. I did contact him snd he did reply+clarify it. Will install the kit and and after i code it with DAS hopefully it all will works great.
@@dusaintel you’re welcome! Happy to help. Before you put all your door panels back on, please verify with him that dip switches are set to your specific model. Because these kits can be used with various models, it is important to set each module or the “master module” to the correct setting. Your kit might be different, but doesn’t hurt to ask just in case.
hey bro... i got 2018 gle 43 in miami FL....I would really appreciate it if you help me find the right place where they can do the work here.
I want to ask you , are the dip switches on those small boxes the same on the ML w166 as in your Gle w166 , and do I need to code at the end to work or just is plug and play , by the way thanks very helpful video 👍🏻
Hi there and sorry for the late response. Dip switches depend on the kit you purchase. ML does not require coding.
ANYONE know there are any shop in Los Angeles do sell and can install ambient light for Mercedes? Thank you so much
Great video, many thanks. Do you know how it works with the OBD adapter? Or do you know we I can get a manual for it.
Thank you! Yes, the OBD module is used with an App called WeChat. It is all in Chinese so navigating the app can be tricky, but if you have a tablet or another phone, you can open Google Lens to translate. The seller will provide further instructions
@@iconam9283 thx for your quick reply
Thanks for the Vid. I'm going to upgrade the speakers too, kill two birds with one stone. The Harmon Kardon Logic 7 speakers are adequate but needs improvement.
hello can you tell from where did you take this ambiance lights and how you installed it to its brain
Is it normal I can't find the dip switches that you have toggled?
nice
Thank you!!
Dude, Thanks for the video, i have a w205 and it helps me, but one question if you can advise me, i can switch 64 colors through orginal ambient lights menu using the knob but on the menu it shows only the 3 original colors ( Polar, Solar, neutral) thanks 🙏
Hi there! You must flash your COMAND unit to unlock full color spectrum. This is done with OBD module and a mini app on We Chat App. Who did you purchase your kit from?
Hello scan this be done on 2013 Mercedes Benz GL 550 x166.. please respond.. Thanks
Yes, same concept
I love it 🔥🔥🔥🔥How much do you charge for this exact model
.erceds dealership said this kit wasn't plug and play for the 2019 Mercedes AMG GLE 63s base. Had to return it.
They are correct. 2019 GLE is w167 not w166
@@iconam9283 The 2019 is still the W166 not 167.
@@daveiga4u yes, I apologize. I was obviously still asleep when I replied to that, lol. 2019 was a transition year to new body. Dealer will always say it isn’t plug and play because they don’t know anything about aftermarket. Message me on instagram and I’ll be happy to go over your options as I have for many others.
@@iconam9283 Don't see your name there. ICON AM?
@@daveiga4u @icon_auto_mods
could you do this for the gls63 2017?
Absolutely. Same process.
Hey! I want to install that to my car but my car hasn't ambient light from the factory, so I bought the trims with ambient light. Do you know if I need smth else to buy? Thanks!
What year is your vehicle?
@@iconam9283 GLE350 2018
@@theYujinsLessons1 ok, you will need to have the COMAND system coded to include the 12 color palette if you want to change the colors on the screen like the factory setup. Otherwise you can buy universal modules that you can control with an app on your phone
@@iconam9283 clear! Thank you so much! Have a great day mate!
@@theYujinsLessons1 of course!
Hi the link looks like it’s expired can you resend it pls?
Amazing video! Where can I purchase a full kit for my 2018 Mercedes GLS 550?
Thank you! Depending where you are located, I would check out eBay or AliExpress.
Hi, I recently installed a kit on my ML63. The doors are perfect, but my dash ambient lighting isn't turning on any longer. When I first installed it the dash ambient lighting was dim and it sometimes would be a different color than the doors when it was actually working. The abmient lighting would also flicker sometimes.. Now the dash lights dont seem to want to turn on at all. Doors are perfect and have continued to be. Could you give me some pointers? I added you on Instagram as well.
Your video was helpful during my install!
I hate to hear that, man. Check all connections relating to the dash harness. Does your dash lighting have its own module? If so, it could be the module. I’ve run into that before. If you’re sharing a door module, but the door lighting is good, then swap connectors and see if your issue moves to the door.
I had an issue with the dash light being a different colour during the install, it turned out that on of the pins for the wire wasn’t pushed into the plug properly (the plug between door and cabin). Once o fixed this the problem was gone. I would check those pins as the modules in your doors are all working, it can only be the pins not connecting
Hello ,thank you for the helpful video , but how is the programming done , I have the module but no idea ? Is there any instructions ? Thanks in advance !
Replied to your IG message!
Thanks for the detailed video, I purchased this same kit couple months ago but Seller didn’t provided instructions and no shop wanted to installed them without instructions, after watching this I can do it myself but I am missing the canbus and power connection (the one with the fuses) should that be included in my kit or do I need to purchase that separately? Thanks in advance
Hey Alex! You're very welcome and thanks for the IG friend request. As for the CANBUS harness, what year is your w166? You're also welcome to message me on IG.
Great video, thanks! What about the ML?
Thank you! Same process. I just learned a few days ago that this kit will actually work for ML as well, just have to set the dip switches to a different setting. I haven’t announced it yet, because I wanted to test it myself.
@@iconam9283 Ah great! So I'll wait your next video to take a decision. You did a great work.
Do we need the odb to activate the 12 colors?
@@AlgeriaAviation not for ML!
@@iconam9283 Oh so it will be easier! Thank you very much and good luck
Awesome job buddy , can you do my GLE in Boston . Lol
Thank you! I’d love to, but I don’t make it up that far north too often. Add me on IG and I’ll give you a name you can trust.
@@iconam9283 ok thank you
Where do I get this kit at I have a 2012 ml63
I have a w212 e350 but I cannot find where to put the yellow connector do you know where that would go on a w212 e350 sedan ?
Hey, sorry for the late reply! You can omit that harness for the w212. The dash harness is to be routed through left front door and connects to that module.
Hi, can this work on a 2012 ML 250 model?
Yes, but you will need to change the colors on the instrument cluster. It will only show 3 colors but if you keep scrolling, the colors will continue changing
Can anyone tell me where to buy this kit? Thanks
Just found this amazing item on AliExpress. Check it out! $20.33 51% Off | For Benz ML/GL/GLE/GLS/CLS/E/S W166 W292 X166 W218 W212 W221 LED BO Tweeter Ambient Light Upgrade Atmosphere Lamp Update Set
a.aliexpress.com/_mtfohXw
Did you ever post the video on programming the system with the OBD module?
Im sorry, I never did. The process is confusing to most and requires the seller to send you an invitation to WeChat App. It is all in Chinese. I cannot endorse this process. Coding your vehicle is something that should be done with care as there is always the possibility of damaging your unit. Should the aftermarket streamline the process, I would be happy to produce an instruction video. Or at least make the app in a universal language. Google lens works well, but it becomes quite frustrating if you don’t have another device to translate in real-time.
you are very good BUT get a dam tripod for god sake
😂 thanks! Yes, I totally agree with you. I did this video 2 years ago on a whim thinking I had time to create content so production left a bit to be desired. Should I ever find the time to make more videos with this amount of detail, I will definitely have one. And better lighting!
I did this same setup on my 2014 ML63 AMG and connected everything back but my passenger side mirror camera when going in reverse doesn’t work but it worked before I unplugged everything. Maybe you can help me on why that’s happening or maybe I missed something else didn’t connect ?
😢 did you happen to unplug the green or blue fakra connector coming out of the mirror? Make sure it clicks into place. Also, there is a separate connector or 2 that comes from the mirror. This supplies power to the camera, mirror, and blind spot detection. Make sure they are plugged in and maybe even make double sure all the pins are fully seated. Let me know!
I get power to it heated mirror paddle light signal works just not the camera. Maybe it could be that where the blue or green clip needs to be clicked in place very possible. I will check tomorrow fingers crossed I will keep you updated.
@@iconam9283 Hi so I got a chance to take off panel again and double check if camera was unplugged, I found nothing everything is in correctly I removed and clipped it back together same thing no different it probably died when I disconnected radio and everything else who knows. I found one on eBay for $200 I’m
Going to buy it used 🤷🏻♂️ vs 700 new
@@sammyg6183 well, that sucks! Message me on IG. @icon_auto_mods
Hi just saw your video. I have a x166 2013
Would like to make the upgrade. Where can I order the unit and programming plug.
Hi Tony, thanks for watching! For your 2013, you can order any kit made for the w212 or w218. Take a look on eBay. You won’t need to program because you currently change your colors on the instrument cluster. It will still only show you current 3 colors, but if you continue to scroll, it will continue changing colors. The seller I used to promote doesn’t sell the kit I’m referring to. Installation will be a little different, but overall, it is very similar.
Way to complicated for me to fuck up the car. Haha. So I be fine with 3 light option unfortunately.
😂 Naw man, you got this!
23:00
@@xiangdiwang7659 ?
Hi there , i have MB ML w166 2014 No ambient light package ,is there a way to retrofit and upgrade ? Thanks
Hey! So, you have 2 options. You can source the necessary trim pieces with acrylic tubes from a salvage yard, install the aftermarket kit, and then have someone code your vehicle to activate ambient lighting option in your instrument cluster (this step may not be necessary as you change the color by holding the "ok" button while using the "call" or "hang up" buttons.
The second option is to purchase a universal kit from DMP or Ali and make your own using the supplied fiber optic tubing.
@@iconam9283 thank you
When will the ml400 kit be available?
Shame he doesn't post to UK. Can't find any sellers 😔
Did you message him? He could make an exception if you pay the shipping.
@@iconam9283 yh just sent a message to check. Thanks
Hey great video. Ate you from Alabama. If so I would love for you to do my GLE coupe
Hey friend! Thanks for the kind words. Not in Alabama, but I am in Little Rock, AR! You could make a weekend trip of it!
@@iconam9283 Great idea. I'll keep you posted on that.
@@elighaterrell1595 great!
Where can I order it at
Thank you for your video! How do I do the programming?
Hello and thank you for your view and comment! I am working on the programming video. I will hopefully have it uploaded this weekend!
@@iconam9283 Thank you. Can’t wait!
@@iconam9283 G'day!
Any update on the programming video
Thank you!
Thanks, very helpful I bought mine from elsewhere before I watched this and it had it today. I got a bit confused at the end where you put everything together at the front Dashboard. My kit just comes with 4 black boxes for the the doors and bunch of wiring for the front, is it possible that the front dash board doesn't need a black box?
Thanks, Emad! Yes, your kit probably requires you to fish the the dash trim harness through the left door and connect it to the “main” box. That’s how the ML kit is. Tell me more about your vehicle.
@@iconam9283Thanks for quick response,
So I connect the front dash harness to driver's door black box? There are a lot of weird cables that I don't have any idea what they actually for. We will love to see you work on ML w166 in the near future
@@EM1-z7p yes sir! You’re welcome to chat with me on Instagram. If you send me pictures of what you have and more info, I can help you. You actually have a more simple kit. My insta is @icon_auto_mods
@@iconam9283 unfortunately I don't have instgram, however I did everything as you said and I tested only the rear doors after installing the kit, but nothing happened, the lights didn't turned on and I tried to change the light through the settings to different light but still no light. Do you have any idea what did I do wrong? I checked every connection and it was correct tried both rear door and nothing happened.
@@EM1-z7p that’s because the left front door is the primary module that all the others tie into
Sir Can I use in gl 350 ?
Yes sir!
Where can I buy this kit from and how much is it?
EBay store says seller has no items for sale.
www.ebay.com/itm/Mercedes-Benz-GLE-Class-W166-From-3-to-12-Color-LED-Upgrade-Kit-Ambient-Light-/184407698093?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Hello, one question, does each module need to rearrange them there 5 pieces? GLE...
Hello Gregor! Thanks for commenting. I’m not sure I understand the question. Perhaps it got lost in translation. Please ask in your native language and I will translate. Thank you!
You didn't do footwell?
I didn’t. This customer requested that I leave the footwell lighting as is because when you replace the factory light housing with the ambient lighting, you lose the factory footwell illumination. That was more important to him. Granted, they would still illuminate in color, but he preferred the warm white lighting. Footwell lighting is easy though. The harness connects to the same harness/module as the dash lighting. Routing of wires is done through center console and down the sides of the transmission tunnel behind the carpet. Be sure to leave enough slack under the seat to allow for forward and backward adjustment of the seat. For a factory-like installation, remove front footwell carpeting and route wires through cable channels instead.
Francesco is incredibly helpful via Instagram and has a wealth of knowledge on these types of kits like I’ve never seen before. I would have been lost with out him so make sure you listen to what he has to say!!
🥲 this is beautiful. Thank you! Happy to help!
Hi Francisco can I please get your ig? I have questions on how to install rear foot ambient on a 2015 w212 🙏🏻
How can I buy this kit? And can I get it installed by a MB professional? And will this work on a GLS550?
Unfortunately, the seller no longer has them available. There are other kits available that require some re-pinning of one of the door connectors. Take a look at some of the comments and ask for suggestions. There are some good folks on here that I’ve helped. Good luck!
Can anyone help me? I'm trying to find the actual fuse for 2017 gls 450 ambient lighting fuse and cannot find it. My ambient lighting stopped working a couple days ago.
I found the fuse boxes but don't know which one it is.
P.S, will this kit work on my vehicle?
Thank you all in advance!
Hey there! Have you checked in ambient light settings to make sure brightness is not turned to “0”?
@@iconam9283 Did that already. It's up to 5
@@bigwilito ok. Is your interior light switch on the overhead control panel in the middle or left position? And yes, this kit will work on your vehicle. You will need to code the COMAND unit to reflect all 12 colors.
@@iconam9283 That's what it was. The overhead lighting switch was not in the middle.
Thank you so much for the help!
You now have another subscriber 👍🏿
@@bigwilito you got it! Glad it was something simple. Started with the basics because unless you’ve been messing with the electrical, it is unusual to have a blown fuse. Thanks for subscribing!
Wow looks amazing! but the install looks like a nightmare. Think I’ll have to pass on this upgrade.
😂 it’s not so bad! Give it a go or bring it to me if you’re anywhere near Little Rock!
@@iconam9283 wish I could swing by, but I’m in Hawaii, will be a bit of journey 😂
is it possible to upgrade it in 2012 model ml?
Absolutely! Same kit
Do u have a store I have the same vehicle designo package I would love to do this upgrade how much and where is ur location ?
Hello Jibran! I am located in Little Rock, Arkansas. I unfortunately am not very close to most people but I do have clients come to me from surrounding states. For more info, message me on Instagram!
I can’t find the kit anymore, I want to buy it for my GLS 450
I just checked and it does appear they are out of stock. I always keep a few kits on hand and would be willing to sell you one. You will need to purchase the programming module from them.
@@iconam9283 Do you know when it will be back in stockb
stock*?
I will ask for you!
Bro really nice work. Can you put a direct buy link and not seller shop? But I can’t find it and I am watching from Germany.
Cheers!
Thank you! The seller here in US does not have any in inventory. I looked on Ali Express and found this. Be sure to contact them and provide your vehicle information for compatibility.
a.aliexpress.com/_mPXiEjs
@@iconam9283 thank you my brother.
Stay healthy and much greetings from Germany.
:-)
@@b.k.3169 you as well!
@@iconam9283 you have after 5 months any problems or general issues with the kit? And how it’s with the brightness? Like day one?
Thanks, I ordered too from AliExpress
@@b.k.3169 I’ve installed these kits for a few years and have not had any issues. Of course, I can’t speak for all the manufacturers out there.
Will this not work in a 2019 GLE?
2019 was a weird year so I didn’t include it in the range as the w167 chassis was introduced that year. Yes, it will work as long as you have a w166 such as the one in the video.
Hey can it be done without opening the car dashboard
Can you elaborate?
@@iconam9283 i mean can it be done with coding
@@_yadav3000 sorry, I’m still a bit confused about the question so I will explain.
2012-15 ML350 does not need coding as the colors are changed in the instrument cluster. It will show solar, polar, and neutral but you will be able to continue scrolling and the colors will change.
2016-2019 GLE must be coded to unlock 12-color palette as the colors are changed on the COMAND unit.
Regardless of year, if your vehicle has the factory ambient light option, all LEDs must be replaced as they are not designed to provide a wide spectrum of colors.
The dashboard does not need to be removed, but dash trim, vents, climate control and COMAND unit must be removed. Hope this helps.
Thanks
Is the new kit brighter than the Oem lighting?
Yes, waaaaaay brighter! Still adjustable, of course.
Hey how are great video! Where are you located? And can this work on 2018 gls63 ?
Thank you! Yes, this can totally be done in a GLS as it is all the same as the GLE. I’m located in Little Rock, AR.
@@iconam9283 kool! do you have a link for the kit? Saw some on eBay but it looks a bit different.
@@WaveyKat well, unfortunately the seller I used to get my kits from no longer has any in stock and I can’t get a hold of him 😔. You’re welcome to send me some links and I can make some suggestions for you. Follow me on IG and message me! @icon_auto_mods
@@iconam9283 thanks again for the video i installed my lights, installation was not hard but the pieces are very fragile and can break easy. got my coding done and works!
@@WaveyKat that’s great! Glad this was a good reference for you! And yes, parts can be fragile. I always recommend disassembly be done in a climate controlled environment. If too cold parts become brittle and crack. If too hot, you run the risk of distortion. Great job! What kit did you end up going with? Please share a link so others can benefit. Thanks!
Does this void the warranty?
They would have to be able to prove that this caused something else to break. So no. I would challenge any dealership that tried to tell me otherwise.
Great video
Link is not working
Thank you!! Not sure why link isn’t working for you, though. Works on my end… weird.
Either way, go to eBay and search for endless_diy_automotive
@@iconam9283 my bad,works but there are no article for sale on that ebay page
@@Driverstein gotcha. Simply click on “items for sale” or “visit store” in the top right corner of the landing page
@@iconam9283 yes i clicked..he has no items on sale
@@Driverstein Brother, I don't know why that could be. Here is the direct link to this item. Only purchase if you are installing on GLE or GLS. We will list kit for ML at a later date.
www.ebay.com/itm/184407698093?hash=item2aef8e2aad:g:5KEAAOSwAG1goJQg
Will this kit work on the GLE 43 coupe?
Yes!
That’s great to know! Also, is it brighter than the stock kit? Mine seems ridiculously dim even at the highest setting.
@@just2crispy super bright! In fact, you might find yourself turning it down a bit. The oem is very dim and the 3 colors offered don’t make it any better.
@@iconam9283 this is all I need to hear. I am purchasing now. I wish you lived in LA for installation haha. Do you perhaps know of any place on the west coast that can install?
@@just2crispy man, I wish I did! I have folks send me the their G’s from there, lol!
I just got the kit and I had a question regarding the dip switch setting, I have a 2017 GLS 450, do I use the same up, up, down, up setting?
Yes sir! They both use the same COMAND unit and CAN protocol so it’s identical to the GLE.
@@iconam9283 alright, thank you so much for the tip!! I’ll be doing the installation this weekend, hope everything goes smoothly
Where did you get it from? Could you drop the link. My 2018 GLS 450 could use it.
Thanks bro
Where can I buy this kit from and how much is it?
Hey Nick! Looks like Endless DIY is out of stock and have been for a while. If you do a quick Ali Express search, you will find some kits on there. Most of the ones I’ve seen on there only have 4 modules which require a little extra work as you have to pin one of the door connectors so that you can use a door module for the dash and footwell lighting. It’s not bad, though. I won’t post a link because I don’t endorse any products that I haven’t purchased myself or installed. Before you purchase, make sure the seller will support you as 2016+ GLE will require some coding. Please watch the video in its entirety and listen closely as I explain. This kit should cost you no more than $150-$200. I’m happy to help you through the install as I have many others. Tips are always welcomed!