VW GTI MK5 4 Door LED Puddle Light DIY - USP Motorsports
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- RFB LED PUDDLE LIGHT KIT - www.uspmotorsp...
Gregg at USP Motorsports shows you how to install the RFB Lighting Puddle Light Conversion Kit on a 4 door VW MK5 GTI.
Find us on:
• Facebook - on. 1TPzRQm
•Twitter - bit.ly/1KfiJkf
•Instagram - bit.ly/1FDkgIG
And the result is........???
That’s why I disliked this video. Fuckkkk it!
can you do a DIY on how to install footwell lights on a 2007 vw passat please ?
Thank you very much for the Video. I have installed the Aux lights today and it looks very good. You have explain all the steps really clear! Congratulations
Will this same install and coding work for a 2018 Tiguan SE? Or can you help with wiring and coding?
Fuckin internet the knowledge of the world I salute you
Great tutorial and the best i have seen. I have a Golf s MY08 BLF and rear windows are manual. Just worried i take everything apart and find the needed port being used. I wouldnt have a clue what to do next.
Thanks for this video. Very helpful. I have a Scirocco 1.4TSI 2012. Is the wiring the same? Positive to slot 18 and the negative to slot 19?
all yours videos are great and very helpful. I have one problem,the pin 19 is busy. Which one to use instead? HELLO FROM SERBIA
You just ground the brouwn wire directly on the frame of the door if 19 is busy
I did this and it worked on my driver side door but my passenger side door worked for a couple minutes then stopped now its only reading 8 volts on my multimeter what could cause this amd how do I fix it?
Hello USP Motorsports
Can the same kit INSTALL on a 2007 VW Passat 1.9 TDI
and how
Yours sincerely
Soren Hjort DK.
***** yes exactly as in vidioen / Remember to fit new Zip Ties
it is not the same number that appears as he has in vidio
but just + 64 to the number you get on your computer
( I made the same as in making the video and it works super well
thank you )
The computer program is VCDS. You can program the coming home feature with that. You can also program the horn when locking with it
Whats does the vcds program do?
does anyone have problems with these door puddle lights? the images seem to be burned by the LED light in just a few months.
any way to make them last??
Hello.
I have a Golf 5 from 2003.
On the front doors my windows regulator motors doesn't have the pins installed.
On the driver side with part number 1K0959793C, only have the 19 pin.
On passenger side with part number 1K0959792C, the 18 and 19 pin is not available.
Is there other way to install the door warning lights without these pins?
really enjoyed this many thanks for upload one of the best Ive seen
17 and 18 is empty on female and male soket 19 is full driver side passat b6 2006
Excellent, i'll definetely buy those lamps and install, but i noticed one thing... my MK5 doesn't have the lock/unlock switch on the passenger side, only on the driver's side. Mine is a 2.5 MK5, from brazil.
Not even a result, nice bro
Why?
Do not buy from these guys. They will take your money and not ship your part. Not worth the headache of dealing with them.
JustinandG Bishop We would love to help you with the issue you are having, have you reached out to our support team ?
Anyone knows why My 2009 MK5 GTI shows ISO/ODB II Compatible? I can connect but cannot access the modules controls?
Can you do this retrofit on an Audi 2016 a3? I just bought puddle lights and it didn't even occur to me that Audi would not have these on any of their cars
Hello hope you can help. I have a 2021 vw Atlas se and it did not come with puddle lights, but it does have the hole with a red reflector there. How can I add puddle lights with this tutorial video
I have installed on the front passenger door a door exit Led lights, i have added 64 on the conrol module 52 for front passenger door but anyway the light is not working? i have made autoscan and I got DTC "00121 - Outside warning light/door exit light on frt. passenger side - Electrical error in circuit, static" according to vcds codes, possible cause for this is faulty fuse. to wich fuse door exit light for passenger front door is connected or maybe one is missing and I should one install it??
I was wondering why my puddle lights or reflectors were not working. Is that a factory setting?I know the Passat puddle lights turn and integrated by default.Where can I purchase them. Very helpful video.Thank you..
Need some assistance... My door plug starts with 16 not 17 as per video... Do I still pin the positive into 18?
Hello my friend ,
which odb cable do you use
I have a golf mk5
which cable can you advise me for vcds?
thank you for your video that you share
Hey
thanks for your demonstration, fun video.
I have a Passat CC from 2009.
Front doors I connected and it works.
but rear doors is pin 4 free, and pin 14 is occupied.
Can you tell me which pin I should use for the red wire?
Thanks in advance.
greetings
Nazariy
ps. sorry for my english, I used google translate
Hello my friend ,
which odb cable do you use
I have a golf mk5
which cable can you advise me?
thank you for your video that you share
I have 2004 golf mk5 1.6 fsi sport if it matters (like in hte video, just not GTI), 4 door, all ectrical windows 8 speakers, will this work?
does the method also on a trade 3c (b6) ??
Is this modification available for the 2004 VW MKIV GTI VR6?
Just fitted these to a mk5 golf and they wouldn't work , tried output test and all ok. The daylight sensor for turning on the headlights automatically was stopping them working until night time.
It will be coupled worked on in 1.9 passat TDI 2008 ?
Hello! I found this video on youtube and I want to say that I appreciate your work. 3 things I wanted to ask ... what is called programmed tester machine? You can program a 2007 Volkswagen Jetta have function "follow me home"? It can be programmed to horn when locking the doors? I'm from Romania and I apologize if I have not expressed correctly. See ya
Annoyingly my mk5 gt tdi 2004 has extra wires for mirror puddle lights and heated folding mirrors so the pin 19 is populated on drivers door leaving only pin18 free and rear door wiring is different completely is there differences between the USA and uk wiring other than the fact you guys drivers side is left not right ?
Would really appreciate some help please dude
Will vw charge me to program once lights are in
thanx for the video!i have a problem with my rear passenger side window. The button opens and closes it in reverse. Should i open the door and flip the switch around? any ideas?
Works Like Magic!!!!! Thanks Aladdin!!!!
Hello, I am interested in whether it can also work on the rear door at MK4 1.9 TDI 2003g. Thanks in advance.
Hi, best clip ever. but i have the same question with my back doors. The windows are manual, so any suggestions?
hey i hafe a golf 5 1.9 TDI plug 18 is free but plug 19 sits my miror wiring what must i do ?
Hello!
congratulations for the video demonstration.
I wanted to ask a favor, the connector pins of the front doors are the 18+ and 19-.
I did not understand those of the connector in the rear doors.
you can tell me you?
thanks in advance;-)
P.S.
sorry if there are mistakes, but I used the google translator, are Italian.
Are the harness locations the same on a 2014 vw cc 18 19. 4 14? I have the kit but not sure the harness locations and want to make sure it’s right.
Would this be the same installation and coding for a 2015 mk7 GTI?
Does this apply to MKV R32 as well, same everything? Same codes?
The driver door instalation is different in my case, just number 18 space is free, number 19 have already a cable. What can I do?
Did u ever figure this out?
What did you do. I need help
why doesn't my 13 jetta have the plugs you are pinning for these puddle lights
Hi, can you please help me find out what the problem with my laser they stay on whatever the door open or close the kill my battery in the morning the car wont start
I have a 2014 cc do the wires plug into the same spot on the wiring harness ? Example the rear 4 and 14 ??
For my Golf pin 14 is orginal busy, were get +12 for rear door Puddle Light ?
Thanks!
+Ainars Čuba is it called the puddle light cos they doors fill up with water?
Did you get a solution to your problem? I have the same problem.
Katlarelo Molapisi Yes pal just keep checking it and make sure rubber seal stays away from the drain hole.
Thanks!!!! Working perfect on a MK5 GTI
Where did you connect the brown wire on the drive side . Coz mine the 19 pin is already having a wire..?
Please
Is this the same wiring for passat wagon 2008 b6/3c?
Thanks
It will be coupled worked on in 1.9 passat TDI 2008 ?
I INSTALL THE SAME KIT BUT NOT EVEN THE DEALER KNOWS HOW TO TERN THEM ON. PLEASE SOMEONE HELP ME, PLEASE.
Why back lights not red !?
For those with Gen 1 middle controller mine was pin 1 for plus and 4 was the ground for front doors, on the driver's I had to use the ground, because it wasn't free. for back doors I still haven't figured it out. MY04 is my golf
Hey, I want you ask you..do you remember which pin was it for rear doors? I found on the internet that 4 for - and 14 for + but i dont have free pin on 14
Oké and how the F do i connect the car to my laptop?
How to install to mk7?? Can you help me
u cant install on all mk5 4 doors if u got 4 door with electric windows but if the rear doors are manuel u cant install them and by the way thank u for ur reply i manage to do them
Did you mange to figure it out? i just opened my door and found pin 19 being used already. 18 is free
let me know. thanks.
+Raza Bakhtiari
hi reza
my best suggestion is if u got vcds go to witchever door u working on module and change the setting then while u got the socket of u can see the pins where u fit the socket check it manually and find out witch is work for u then attach the brown and red wire to the pins and open the window and close the door to make sure the light going off then find out what number pins u need to conect ur wires to on the socket then solder them to the wires u done ....
Great video man with all details needed...but iam not sure is this going to work for r-line beetle 2016 or not....i am more concerned by the pin numbers is it the same?!
Is there a way you can hard wire it without have to go through VCDS?
excuse me, these codes are used for jetta 2.5l mk6
Could you write repeat all door control module pin number?
did the doorlights stay on even with the headlights switched off ? that meaning always on ... ?
Yes, they will be on as long as the door is open.
Thanks
Great how to! It helped me a lot when fitting these, thanks.
No worries! That's why it's here! Thanks for the support
It's the same thing and for golf mk6?
Ciao quei pin sono occupati come faccio?
Can this be fitted on Audi A3 8p 2008?
It is the same procedure for golf 7 or change , I need help
Thanks a lot for answer and promptly! To find the pin code for the 2007 Jetta which program do you recommend? Thanks in advance
Could you write all door control unit pin number please?
pin 18 is free but pin 19 is not so what ahould i do vw golf mk5 2004 ??
same here, how you do?
I don't have the pin 18, I realy dont know why
This fit on vw passat cc 2010 model?
The installation process for your car is the same as in this video
USP Motorsports Hi I have a Golf Mk5, 2005, and I have connected to 18 and 19 one the front doors, but it dosent work. The vcd numbers was 0000180 on both sides. What should I put in for numbers instead?
USP Motorsports do you happen to know how to connect with the wiring in a 2016 Golf R?
USP Motorsports Hello, I have the wiring as you say but in the back doors when putting 0001232 do not turn on either of the two rear doors, the front yes I do. Can you tell me where I can have the error? Code of the front doors that I have is: 0001269
Hey. Really great video guide.
I have a 2006 VW Passat 4Motion wagon.
What I wonder is: The car has lights under the doors, that works.
If I change to these LED lights, is it simply to replace the lamps without removing the door trim and use the wiring, and program the VCDs?
My point is: Simply plug and play?
Answer much appreciated.
when I make a DIY installation vw mk 5 feet front and rear lights?
Hi..on my golf 5 on the right door the 18 and 19 was free so I could install it nicely..but on the left door the 18 was free I installed it mice but the 19 was taking is originally fix to the outside mirror control in this case what should I do please help me find a solution..Thank you.
I would like to know if this procedure I can do it to vw jetta 2014.
you know bro, I was trying to install in my jetta se 1.8 2014, but I could not do it. because it does not have the same harness. what shoul I do in this case.
which usb wire you used to connect your computer to your car
thank you
It’s a vcds/vagcom from Ross tech
red is the positive and the negative brown?
You didn't even show what it all looks like on.. hope you can add it to the video.
Perfect tutorial dude ! I just did it on my Tiguan 2K11 all works !
Hi is it the same installation on vw touran match 1.9tdi?
in what way should go into VCDs to activate the horn when locking the doors?
where can I get the lights and to get them coded
The installation process on a MK6 GTI is the same?
hey does this setup also works for Golf 5 1.9 TDI?
Yes. Works on all MK5 Golfs
USP Motorsports thank you very much
+USP Motorsports hi I have a 06 Passat b6 does all the pins location and codes number apply for my car also thanks.
What software you used and why you need to code the light please explain? by the way great video
To tell the car that the lights are there and to operate. Vcsd is one of the best to use
hi thanks for the video got mk5 golf 2004 but conector is different number can put number 18 in but number 19 its already another wire in
can u help please
Hy. Same problem. Do you have the answer?
same here how you o?
I know it's 1 year too late but have anyone figured it out?
Does the VCDS have to be the one from RossTech or which one do you recommend?
CAN THIS WORK FOR VW CC 2013??
Will this work on a mk6 jetta?
Is the same with Golf 6 plus ?
I did everything the warning light is ok but my side mirror light not working now
How to search that pins wire?
For mine, 19 already has a cable, I'm golf mk5..not sure what to do there
Mine also. what dd you do to yours?
@@nanyalaprota2922 I used another slot, don't remember, maybe I used 21 and 17 something like that
@@Heatlink1 thanks I will try
Не показали как работает ((. Зачем вообще делали?
is the coding the same for scirocco?