DIY Drill and Tap Benelli M2 | Building The Ultimate Turkey Gun | Done in 30 minutes
ฝัง
- เผยแพร่เมื่อ 29 ก.พ. 2024
- www.youtube.com/@BuffaloCreekOutdoors...
TOOL LIST:
-DRILL
-#28 ENDMILL
-CENTER DRILL
-8-40 TAP
-TAP HANDLE
-TORQUE SCREW DRIVER
-SHARPIE
-RACHET
-6" EXTENSION
-1/2" SOCKET
-PUNCH
-SMALL FLATHEAD
-BURRIS MARLIN 336 MOUNT AND HARDWARE
-LEVEL
-GUN VISE ( SOMETHING TO HOLD THE GUN LEVEL AND TIGHT )
-OIL
-THREADLOCKER
-CALCULATOR
-CALIPERS
BowBars Bow Vise:
bowbarsarchery.com?ref=buffalocreekoutdoors
New Website- bcreekgear.square.site
MAIN CAMERA
SONY A7III- amzn.to/34IOwbV
SONY 24-105 F4 LENSE- amzn.to/2TzzvXz
128GB SANDISK MICRO SD- amzn.to/3cftfLe
CAMO RUBBER CAMERA HOUSING- amzn.to/34LPbcA
REPLACEMENT BATTERIES- amzn.to/3fPIoFo
HOT SHOE MOUNT- amzn.to/3cg9GlY
3 WAY HOT SHOE MOUNT- amzn.to/3g57WwV
FILM REMOTE- amzn.to/3fLvNTq
5” DISPLAY MONITOR- amzn.to/2UI1JQL
SECOND CAMERA
SONY A6500- amzn.to/2RZqSp7
SONY 18-105 F4 LENSE- amzn.to/2TJ1GDP
CAMO CAMERA HOUSING- amzn.to/3uPDFrt
REPLACEMENT BATTERIES- amzn.to/2TH6FET
CAMERA CAGE- amzn.to/34HAPdm
WIRELESS REMOTE- amzn.to/3yZ280K
ACCESSORY CAMERAS
SONY RX100 M5- amzn.to/3hAWUBC
DJI OSMO ACTION- amzn.to/2U5Ykeu
DJI MAVIC AIR- amzn.to/3AZ3FVy
AUDIO
RODE VIDEO MICRO- amzn.to/3r5rXIZ
COUNTRYMEN B3 LAV MIC- amzn.to/3wDmvxZ
RODE WIRELESS GO II- amzn.to/3xD9GFt
AUDIO SPLITTER CABLE- amzn.to/3wxhBTe
MOUNTS/TRIPODS
MONOPOD- amzn.to/3r9u7aE
CAMERA ARM- amzn.to/3ehcSPo
TRIPOD- amzn.to/3egYG93
OPTICS
BINOCULARS- amzn.to/3kfCSOY
SPOTTER- amzn.to/2U5QkKs
PHONE SKOPE- amzn.to/3kkDbrP
CHARGING
20000 MAH BATTERY PACK- amzn.to/3yUAVeU
10000 MAH BATTERY PACK- amzn.to/2UanBEd
21W SOLAR PANEL- amzn.to/2TXHQ8h
BLACK DIAMOND SPOT HEADLAMP- amzn.to/2TYoH6d
Go Check Out Grafton Archery and Outdoors:
704-855-1300
Follow us on Facebook, and Instagram:
/ buffalocreekoutdoors
/ thebuffalocreek
Artlist Song Certificate
Creator Pro License Number - 515732 License owner - Caleb Srackangast
This Song Certificate is granted by Artlist Ltd (hereinafter: "Artlist"), to: Caleb Srackangast - แนวปฏิบัติและการใช้ชีวิต
I would have used a meadow creek rib mount ...
It’s a good option, I just wanted my optic farther back.
Great video, did you reach back in to see how far the screws went past the aluminum into the receiver? Wasn't sure if the bolt could touch them.
I did, the screws are flush inside the receiver. I was worried about that as well.
You did a great job
The only thing I would suggest was to use a tapping block to tap the hole
I tried to do this video for guys to do with minimal tooling. If not for that, I would have done this job on a mill. A tapping block would be a great option as well for those that have one, and would definitely make things more accurate.
How's it holding zero after putting some rounds through it? I was told not to drill and tap Aluminum Shotgun Receivers without installing steel reinforced inserts or Helicoils first. Was told aluminum wouldn't have the tensile strength to counter the mass of the mount optic and recoil. Maybe that's for Big optics and not such a worry for lightweight RMR SRO types?
I’ve had no issues with losing zero, or screws coming loose or stripping out. I put it through its paces this year in 4 different states, and she is still holding strong.
Too bad they no longer offer the 21” barrel in the M2. That makes for an awesome turkey gun imo. I’ve had mine for 15-20 years now. My goto gun for waterfowl and turkey. Quick pointing and easily maneuverable in tight places.
I would 100 % buy one.
That mount should work on multiple shotguns correct? I was looking to do something like this on a Maxus II. Is the Benelli receiver aluminum too?
It will work as long as you drill and tap your gun specifically for that mount. If your gun is already drilled and tapped, it may not work. Also, yes the benelli receiver is aluminum.
@@BuffaloCreekOutdoorsOfficial Thanks for getting back! That is a sweet setup you have! I love the red dots since they work well with my eyes. We have a Burris on my daughter's SA20 Turkey.
Is there any risk of the screw penetrating to deep into the mechanism of the gun?
There’s always a risk, but my screws were flush with the bottom of the wholes. In the case that they were not, I would have gotten a slightly shorter screw.
How about a maverick 88
I’m going to drill & tap a Benelli Nova Tactical. I purchased 8-40 tap, but you’re saying I need to drill a 28 inmil(?) (in mule) then hand tap the threads. I can’t just drill my 8-40 tap?
…end mill? I’m from Colorado and your accent is throwing me off😂
You can use a drill bit, but the high speed “end mill” cuts a much cleaner hole in the hardened receiver.
@@BuffaloCreekOutdoorsOfficial thank you for your response.
@@BuffaloCreekOutdoorsOfficialdo you know what drill bit would match the 8-40 tap?
@@sambro9134 #28