i love all your videos - such skill -and i love that workshop..great playing too👍 it always seems like you have to saw an entire house worth of reclaimed wood each time😂
Great vid and the subtitles really help. Would you be able to share more details about the finish? How many stain/wax coats, what grit sanding in between, etc.
Fascinating video, thank you for sharing! Your skill with hand tools is very impressive and the guitar is beautiful! I couldn’t believe how well the face cut of the walnut top turned out, in particular, though all the planing and chisel work was amazing. I had a couple of questions from this build that I’m wrangling with for a similar effort… - it looked like you used a flat neck slot (e.g. no angle). Is that the case and if so, did you pre-measure the bridge height to determine the depth of the neck slot? - was the neck profile symmetric (top & bottom to the flat) or asymmetric like the Endurneck (angled slightly from the bottom at the neck pocket to the top close to the head)? - having put in fanned frets, did you prefer them to straight (square) frets? They seem to get mixed reviews… Thanks!
The headless bridges are pretty low, so there wasn't much break angle needed. I just sanded it into the heel. The neck profile is an asymmetric trapezoid, where the bass side rund parallel to the neck and the treble side parallel to the center line. As for the fanned frets, I'm not picky. I like them, but I have nothing against "normal" frets either.
Good morning. I wanted to ask you last time. Why, when making the neck, when you make the fingerboard, do you plan it on the sides and then glue strips of the same material to it. Is it because of the strengthening, so that it does not curl? Thank you. Amazing work, you are a great master 👍👍🤘
i love all your videos - such skill -and i love that workshop..great playing too👍 it always seems like you have to saw an entire house worth of reclaimed wood each time😂
So much sawing! 🤣
What a master, best I have seen.
Thank you
I could watch this for hours. Ive been contemplating doing a hand build. Youve inspired me to give it a shot
It's a super rewarding hobby, I can highly recommended it!
Great vid and the subtitles really help. Would you be able to share more details about the finish? How many stain/wax coats, what grit sanding in between, etc.
I think I did 2 coats of the black stain on the mahogany, then followed it up with around 4 coats of Osmo hardwax oil on the front and back.
Nice job
Thanks!
Fascinating video, thank you for sharing! Your skill with hand tools is very impressive and the guitar is beautiful! I couldn’t believe how well the face cut of the walnut top turned out, in particular, though all the planing and chisel work was amazing.
I had a couple of questions from this build that I’m wrangling with for a similar effort…
- it looked like you used a flat neck slot (e.g. no angle). Is that the case and if so, did you pre-measure the bridge height to determine the depth of the neck slot?
- was the neck profile symmetric (top & bottom to the flat) or asymmetric like the Endurneck (angled slightly from the bottom at the neck pocket to the top close to the head)?
- having put in fanned frets, did you prefer them to straight (square) frets? They seem to get mixed reviews…
Thanks!
The headless bridges are pretty low, so there wasn't much break angle needed. I just sanded it into the heel.
The neck profile is an asymmetric trapezoid, where the bass side rund parallel to the neck and the treble side parallel to the center line.
As for the fanned frets, I'm not picky. I like them, but I have nothing against "normal" frets either.
Good morning. I wanted to ask you last time. Why, when making the neck, when you make the fingerboard, do you plan it on the sides and then glue strips of the same material to it. Is it because of the strengthening, so that it does not curl? Thank you. Amazing work, you are a great master 👍👍🤘
The ebony binding is just for clean look. I don't like seeing the fret ends.
@@rauschguitars ok 🤔 thank you 👍
Hervorragende Arbeit, Glückwunsch...!!! Vielen Dank fürs Teilen.
Grüße aus Uruguay...!!!
PS: Entschuldigt mein Google-Deutsch...!!!
Thank you, Alvaro!
Next project pls 😊
Coming soon! The rough edit is currently sitting at 3 hours.
very good do you have this plan to make available to me?
Unfortunately not. I used FretFind2D for the fretboard layout, then designed the rest around that.
@@rauschguitars ok
I'm crazy about a guitar like that but I don't have the plan
...