Star Racing Yamaha Inspired PW50 Build
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Welcome back, or if your a first timer, WELCOME!
Were switching it up today and working on a 2022 PW50
You can purchase this graphics file here: www.todaywewre...
Hope you enjoy and as always if you have any questions comment below.
Very nice nick I know he was overwhelmed by the new look 😀
Hell yeah he loved it
Little guy's gonna be pumped. Very nice
Thanks
Superb! Love it! Well done bro! Could ya share what are the specs of the tires? Or maybe send a link ? Thanks in advance!
Dunlop MX34 front tire on both front and rear wheel is the go to setup for the PW50.
@@jowens4160 what would a 65 jet do to the bike?
Anyway you can tell me or send me the link for your handlebar setup. I really appreciate it. And your bike looks amazing
Thanks! here is the handlebar kit www.partsgiant.com/p403757-odi-pee-wee-handlebar-kit?m=28670678&gad_source=1&gclid=Cj0KCQjwjLGyBhCYARIsAPqTz1_K5gt9OwvdIAF_QzbxrZjGovDXFiDUbmQkfgbiKpGRkx1yU2Fg8iMaAiDFEALw_wcB
Great build and video, thanks for making it! Building my son’s bike now for his upcoming 5th bday. Any chance you can share where you sourced those factory style decals from and the dunlop fork decals? Thank you!
The graphics are from 139 Designs. Tell Chris you want Jarman's PW graphics and he will know what you're talking about. As for the dunlop on the tires, its paint marker. Clean it with break clean and give it a couple coats.
@@TodayWeWrench amazing, thank you! How tall is your little one now? You think w the odi risers you can keep him on it on the pw50 until he’s 7yo or would look into upgrading to a 65cc by 6yo?
@@patrickmaus My son is 3 so I had to shave the seat in order for him to touch tip toes. To answer your other question, yes a 7 year old will fit just fine. They make riser seats if he's on the taller side and the ODI bars are not that high so I would go with Cycle Worx high rise bars. I would only upgrade if he's a good rider and ready for a clutch and shifter. Personally my son's next move will be a KTM 50 so that he can learn clutch and shifting at the same time and not learn them separately. I will skip right past the XR70 or something with an auto clutch. Hope this helps let me know if you need anything else
Hey buddy love the build thanks for all the info where can I find that seat cover with the Yamaha logo
It's from Moto Seat. You have to select side logos then put in the notes that you want Yamaha
Anyone have any recommendations my son's PW50 runs amazing other than no bottom power. He's 52lbs carbs clean clean 65 main jet hotter plug 93 pump gas no sputter good compression. Heavy duty clutch springs. Clutch doesn't slip. Barley gets out the gate. High performance race gear installed. Any recs would be appreciated 👍
Have you checked the compression?
A bigger bike, sounds like he should be moving toward a race 50 or 65
You changed piston and/or gaskets from OEM? You mighta inadvertently changed the port height to expansion chamber 'height'
Might be able to rectify with porting work.
Also, check your reeds. And ignition timing could be off.
There's not much to them so start with cheapest n easiest thing it likely could be and work down the list towards the more expensive end
Hi, I was just wondering where you buy that seat cover from?
Where did you get the gripper seat cover from, Please?
Im making my daughters PW50 black and pink for her, and would love to replace the seat cover too..
Pink/Black gripper seat would be ace...
Moto Seat
Just curious why a 65 jet. Are you running pump gas? We have 91 pump out in the west. Dry climate at low altitude. Also have a 2022 with removed brass piece. Bike runs pretty good. Wondering if it will benefit from the 65. jet.
Im running 93. The 70 is a tad rich and the 65 solved that
I’ve looked and looked at the “moto seat” website but unable to find where you add Yamaha to the seat. Do you have to call and special order it that way?
Select logo then email them with the order number and say you want Yamaha logos on the side instead of Moto Seat
Hi, where is the graphics kit from?
I designed them
What pegs did you go with.
Cycle Worx