Monoblock Water Pump Servicing | Replacing of Non-return Valve to Avoid Vacuum Leaking in Pumps

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 มิ.ย. 2019
  • A common problem occur in mono-block water pump is that it is running but there is no water coming out or lifting. To rectify this problem be have to follow these steps:-
    1. Turn power to pump off.
    2. Open the nut from the top of pump which is using for pouring of water to rectify air trapping problem in pump..
    3. Pour water into pump until water fills pump housing.
    4. Turn power on of the pump and block.
    5. Open faucet or hose bib at pump to bleed air from system
    If your pump not lifting water, this may due to leaking of non-returning or check valve in monoblock. Please watch this video to solve this problem and to have idea about how to change non-returning valve in monoblock water pump.
    This video is prepared and presented by guideuncle

ความคิดเห็น • 53

  • @prasadnagaraja2981
    @prasadnagaraja2981 3 ปีที่แล้ว +2

    Good information, educated well to know the simplest reason for improper functioning of Mono block pump set

  • @lalitanjumkher6648
    @lalitanjumkher6648 3 ปีที่แล้ว +1

    Great video

  • @MukeshKumar-zs8eu
    @MukeshKumar-zs8eu ปีที่แล้ว +1

    Nice video 🙏🙏🙏

  • @md.allauddinshah7808
    @md.allauddinshah7808 ปีที่แล้ว

    बहुत ही अच्छा लगा Air nut पर एक वीडियो विस्तार से बताये Air कैसे निकले

  • @ali25120
    @ali25120 4 ปีที่แล้ว +3

    Thanks, brother the same problem occurred in my motor I have done same now it's working

  • @PraveenMalhotra-vn5zj
    @PraveenMalhotra-vn5zj 9 หลายเดือนก่อน

    Good video, fruitful information

  • @roxboymdazaz9488
    @roxboymdazaz9488 ปีที่แล้ว

    Thnx brother ☺️

  • @snrankawat6819
    @snrankawat6819 11 หลายเดือนก่อน

    Very nice

  • @narendersingh9173
    @narendersingh9173 ปีที่แล้ว +1

    I have re place non reatining volal then after pressure not cumming & oil seal is all so ok

  • @suhelahmed2389
    @suhelahmed2389 2 ปีที่แล้ว +1

    Good

  • @rajasahoo7027
    @rajasahoo7027 4 ปีที่แล้ว +3

    Kya Monoblock pump mein hum alag re NRV laga sakte hain input line mein?

  • @hrushikeshjondhale9935
    @hrushikeshjondhale9935 ปีที่แล้ว +2

    Sir mera ghar 3 manzila hair upar pani chadta is liye hamne motor lagayi hai ,usme valve hai par kya me us valve ko nikal kyoki ab us valve ki koi zarurat nahi hai,

  • @DharmaShakti130
    @DharmaShakti130 2 ปีที่แล้ว +1

    That spring loaded stop flow check valve fitting direction part video you cut. While opening that part from pump also unfortunately you don't show properly. Any how thanks

  • @hps8794
    @hps8794 4 ปีที่แล้ว +1

    Sir hum football use kerte hai to check valve use kerna chaiheye kya
    Humara check valve nahi hai to problem hoga kya

  • @vpsvlaxmi1206
    @vpsvlaxmi1206 3 ปีที่แล้ว +1

    Cache see tight karen or thodaa tho day tight karen. .Sarah nagin aaya.Matlab full tight karna hai ki thodaa dheelaa rakhnaa hai.

  • @rupamsengupta8406
    @rupamsengupta8406 ปีที่แล้ว +1

    1 H.p waterpump suction pipe size

  • @roygomes9861
    @roygomes9861 ปีที่แล้ว

    Pressure getting reduce if non return valve not fitted?

  • @bursayyakzazalee7030
    @bursayyakzazalee7030 3 ปีที่แล้ว

    Bhai meray motor ka pipe dono k beech ka hissa crack hogia isko joodny ka koi illlaaj hy app k pass

  • @vijayghorpade6330
    @vijayghorpade6330 3 ปีที่แล้ว

    Dear sir mere pass ek old modal ki watar Pum motar hai vo chalu hai usake sab part maine chej kiya hai lekin vo pani nahi uttathihai our karant marthi hai plz sir video bhej de Ahmednagar Vijay Ghorpde

  • @manpreetkumar1135
    @manpreetkumar1135 8 หลายเดือนก่อน

  • @arterash7980
    @arterash7980 ปีที่แล้ว

    Excellent information - where did you buy the new check valve from?

    • @Guideuncle
      @Guideuncle  ปีที่แล้ว

      From spare shop who sale pumps

  • @praveenmalhotra159
    @praveenmalhotra159 3 ปีที่แล้ว +1

    Nice video, how do you remove airlock in the monoblock pump? Thank you

    • @Guideuncle
      @Guideuncle  3 ปีที่แล้ว +1

      Airlock can be remove by lossing of 1/2 " screw at top side of monoblock

    • @praveenmalhotra159
      @praveenmalhotra159 3 ปีที่แล้ว

      @@Guideuncle Thank you so much.Subscribed

    • @praveenmalhotra159
      @praveenmalhotra159 ปีที่แล้ว

      How to remove the monoblock pump from the settings?

  • @vishalkurmi2169
    @vishalkurmi2169 4 หลายเดือนก่อน

    Kya ye 4 inch me aata hai.plz reply

  • @raazriyazk233
    @raazriyazk233 2 ปีที่แล้ว +1

    Bro
    if we remove check value from water motor is there any problem for water motor

    • @Guideuncle
      @Guideuncle  2 ปีที่แล้ว

      Check valve in pump work as a non return valve. When your motor is not working then water in pipeline will return and pump block need priming for lifting water

  • @rajan545
    @rajan545 ปีที่แล้ว

    Hello sir ji
    Mere pump ka NRE valve bar bar change karna pad raha hae.. uske liye kuch option available hae kya?

    • @Guideuncle
      @Guideuncle  ปีที่แล้ว

      Apke Pani mai salt contant Jada ho sakta hai jise NRV ka spring tension and valve seating area per particals deposit ho jate ho. Aur iska solution ye hai ki aap NRV main SS ka spring laga de and valve seating area ko time to time clear ker dain

  • @SocialAwareness-007
    @SocialAwareness-007 4 ปีที่แล้ว +2

    non-returning valve kaha milta hai.. please share the link

    • @praveenmalhotra159
      @praveenmalhotra159 3 ปีที่แล้ว +1

      Any hardware store near your house. Costs Rs 30-50

  • @vijaykotia7724
    @vijaykotia7724 3 ปีที่แล้ว +2

    Bro what is the price of this ?

  • @sandeepshankarsingh
    @sandeepshankarsingh 4 ปีที่แล้ว

    Level ka kya issue hai?

    • @Guideuncle
      @Guideuncle  4 ปีที่แล้ว

      Pump always installed at lower than ground level for better perpormance

  • @ravikiranr9098
    @ravikiranr9098 3 ปีที่แล้ว +1

    How to buy nrv sir

  • @mehrazali2455
    @mehrazali2455 2 ปีที่แล้ว

    Ye valve kitney ka hai

    • @Guideuncle
      @Guideuncle  2 ปีที่แล้ว +2

      You can get it in 50 rupees

  • @DharmaShakti130
    @DharmaShakti130 2 ปีที่แล้ว +1

    Anabond specification & price please

    • @Guideuncle
      @Guideuncle  2 ปีที่แล้ว +1

      Anabond for general application and its cost around 30 rupees.

    • @DharmaShakti130
      @DharmaShakti130 2 ปีที่แล้ว +1

      @@Guideuncle Thank you sir

    • @DharmaShakti130
      @DharmaShakti130 2 ปีที่แล้ว +1

      @@Guideuncle I get Anabond Cyno 555M. Can it be correct for pump casings to air tight pack. My doubt is sir you used paste but this 555M anabond is liquid type & it is written it instantly adhesive gum. Please kindly answer. In case of reopening pump casings may be it sticks permanently & never open & if beaten by hammer it may broken permanently become waste

  • @sarangpundir6053
    @sarangpundir6053 2 ปีที่แล้ว

    Bhai Mera pump pressure nahi le Raha tha, jab maine inlet open Kiya to check valve tha hi nahi

    • @Guideuncle
      @Guideuncle  2 ปีที่แล้ว

      Actually check valve pressure building nahi karta hai iska kaam kebal non returning the fluid hai pressure building uski impeller and bush change karna padega

    • @sarangpundir6053
      @sarangpundir6053 2 ปีที่แล้ว

      @@Guideuncle thanks bhai, maine check valve laga diya, ab Kam se kam bar bar outlet se Pani nahi dalna padta

  • @santhoshthombra3568
    @santhoshthombra3568 3 ปีที่แล้ว

    Sir
    Check valve where are available

    • @Guideuncle
      @Guideuncle  3 ปีที่แล้ว

      This check valve is available with all pumps supplier or from pumps repairing shops.

    • @santhoshthombra3568
      @santhoshthombra3568 3 ปีที่แล้ว

      No available kerala

    • @Guideuncle
      @Guideuncle  3 ปีที่แล้ว

      @@santhoshthombra3568 this check valve is available on Amazon at Rs. 250/- it's costly but this can solve your problem.

  • @MrKhan-uu2tb
    @MrKhan-uu2tb 3 ปีที่แล้ว

    He use old valve lol🤣🤣🤣🤣