DIY Jet Pump Repair | Tamil | Seedsmonk

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ต.ค. 2024
  • Today we gonna see some interesting topic something related quite a technical content. Actually before rectifying the issue the motor runs for about 1.30hrs to fill 1000liter overhead tank which is placed at the top of 1st floor, it's a 1.5HP Jet pump... so initial period it was around 1 hour but after a prelong usage the motor as consumed huge amount of time for filling up, so after a referring some texts & lectures everything I tend to do a DIY using the gained knowledge which made me to overhaul the PRV that is pressure relief valve in the pump at last the last, the minutes has been lost were successfully retained.
    Enjoy the science behind the repairing of the jet motor pump! Lol
    _________________________________________
    How I grow pineapples at home | Super easy
    • How to grow Pineapple ...
    _________________________________________
    Thanks for watching!
    #Repairsciencejetpump #DIY #Seedsmonk

ความคิดเห็น • 80

  • @mangudimarthadam..2493
    @mangudimarthadam..2493 3 ปีที่แล้ว +2

    பேச்ச கொரசிட்டு வீடியோ பண்ணுங்க எல்லோருக்கும் புரியும்...

  • @sivakumarshanmugam4430
    @sivakumarshanmugam4430 3 หลายเดือนก่อน

    You should have mentioned the pressure in pressure gauge before and after, pressure range??? To be maintained, you have checked the valve to verify the good delivery???? How lacking clear explanation

  • @GLTTEandA7ZENGINEERING
    @GLTTEandA7ZENGINEERING 8 หลายเดือนก่อน

    Ss shaft skp baring coper Wyandotte pumps all good price coimbatore making pump guru live tech technology ana engineering

  • @CNVISHALPANAV
    @CNVISHALPANAV 3 ปีที่แล้ว +3

    BRO IT WAS SUPER BUT KINDLY EXPLAIN DIFFERENCES BETWEEN SQUARE BED JET PUMP AND CENTRIFUGAL JET PUMP WHICH WAS GOOD

  • @sundarv9729
    @sundarv9729 2 ปีที่แล้ว +1

    மீட்டர் இல்லை என்றால் பிரஷர் எப்படி கண்டுபிடிக்கப்பட்டது? Please sir

  • @dhivyapuppy5212
    @dhivyapuppy5212 2 ปีที่แล้ว +3

    Adei neeya da by marimuthu bhel

  • @poojajanani3751
    @poojajanani3751 2 หลายเดือนก่อน

    1hp jet motor noise & water come out level pressure low

  • @nandakumarsrinivasan8728
    @nandakumarsrinivasan8728 ปีที่แล้ว

    No technical stuff is conveyed .

  • @periyasamysamy7470
    @periyasamysamy7470 ปีที่แล้ว

    Neermulli motor employer Jet Ke Pan badhta Lama

  • @mgr5550
    @mgr5550 2 ปีที่แล้ว +2

    Hello, i have a small question.....in my home the borewell depth is about 75 ft......how much hp jet pump do i need to pull water form 75 ft and push it to my overhead tank which is at a height of 35 ft from ground.

    • @jeyahari1460
      @jeyahari1460 2 ปีที่แล้ว +1

      1 hp jet சரியாக இருக்கும் ஐயா

    • @mgr5550
      @mgr5550 2 ปีที่แล้ว

      @@jeyahari1460 > Thank you Hari. Is Suguna Motor brand ok in quality ?

    • @jeyahari1460
      @jeyahari1460 2 ปีที่แล้ว +1

      @@mgr5550 ஐயா உங்கள் ஊர் எது

    • @jeyahari1460
      @jeyahari1460 2 ปีที่แล้ว +1

      @@mgr5550 ஐயா சுகுனா மோட்டார் நான் கேள்விப்பட்ட வரை நன்றாக தான் இருக்கிறது....
      இருந்தாலும் உங்கள் ஊர் electrician னிடம் கேட்டு கொண்டு ஒப்பிட்டு பார்த்து வாங்குங்கள்....
      அவர்கள் சொல்லும் கம்பேனி பெயரை சொல்லுங்கள்....

  • @muthukrishnan9529
    @muthukrishnan9529 4 ปีที่แล้ว +3

    Nalla pesura... But so so so so so so va vituru

    • @Seedsmonk
      @Seedsmonk  4 ปีที่แล้ว

      Rightu...muthu ji 🥰

  • @syedmohamed7079
    @syedmohamed7079 29 วันที่ผ่านมา

    Use less vedio

  • @imdhadullayt7130
    @imdhadullayt7130 11 หลายเดือนก่อน

    Hi bro

  • @pressent1109
    @pressent1109 2 ปีที่แล้ว

    Time wast

  • @dajrock102
    @dajrock102 2 ปีที่แล้ว +1

    Bro. Motor nalla work agudhu and airlock kum illa.
    But water veliyave vara matindhu y?

  • @abdulkader6448
    @abdulkader6448 3 ปีที่แล้ว +1

    Yenya ipdi pesi arukura

  • @tamilshortsviral
    @tamilshortsviral 3 ปีที่แล้ว +1

    Thank you very much sir, your idea very used to my house... Thanks lots.....

  • @badrunkreatif851
    @badrunkreatif851 3 ปีที่แล้ว +1

    Good work.i Indonesia

  • @vagishgpatil3013
    @vagishgpatil3013 2 ปีที่แล้ว

    We have same model of 1hp mono block centrifugal pump 20year old model... But not working ...pressure gauge Broken

  • @everbrightnixon-ix1qv
    @everbrightnixon-ix1qv ปีที่แล้ว

    Can anyone tell the purpose of two pipes in suction. Y not one pipe.
    No NRV in my system. Simple gate valve given in outlet. Any issue expected?

  • @sundarv9729
    @sundarv9729 3 ปีที่แล้ว +1

    Thank you sir but if not fixed meter. How can i check pressure?

    • @Seedsmonk
      @Seedsmonk  3 ปีที่แล้ว

      Meter is the only way to check, try attaching possibly

  • @selvarajgovindarajulu951
    @selvarajgovindarajulu951 4 ปีที่แล้ว +2

    Bro, my suguna jet 1hp now running good condition. In future service wanted

    • @Seedsmonk
      @Seedsmonk  4 ปีที่แล้ว

      Do Service if only needed

    • @jeyahari1460
      @jeyahari1460 2 ปีที่แล้ว +1

      எத்தனை அடி இறக்கி இருக்கிறீர்கள்

    • @dhanaganesan5620
      @dhanaganesan5620 6 หลายเดือนก่อน

      Want your contact number
      .

  • @suryasakthi3690
    @suryasakthi3690 3 ปีที่แล้ว +1

    எத்தனை அடி இழுக்கும் எத்தனை அடி தள்ளும் ஜெட் மோட்டார் ப்ரோ

  • @123kushime
    @123kushime 4 ปีที่แล้ว +1

    Hi, what u r talking is really latin and greek to me.... still i want to try something... in my flat we have 1HP jet pump... is that must to apply grease
    for every six month once or one year once... can u help me here..

    • @Seedsmonk
      @Seedsmonk  4 ปีที่แล้ว +1

      Sure bro...do dm me at insta @seedsmonk

  • @imdhadullayt7130
    @imdhadullayt7130 11 หลายเดือนก่อน

    I start i jet pump at 4 point pressure than it goes to 4.5 water level was slow what was the problem tell me bro

  • @dilipraj8121
    @dilipraj8121 4 ปีที่แล้ว +1

    Hi Sir. I have crompton jet pump 1 hp.
    A. The problem I am facing is water flow is too low.
    B. When I loose the pressure valve to max the water pressure is good but it's just for one time and again I have close the val🔥 and reopen the valve to gain the good water pressure.
    C. I find water leaking near the valve adjusting nut.
    Any Idea how can I resolve this problem.?
    Please provide me your number so that I can send you the video clip.

    • @Seedsmonk
      @Seedsmonk  4 ปีที่แล้ว

      Sure bro, tough seems, but don't worry...dm me on insta @seedsmonk

    • @shanmugabalan3960
      @shanmugabalan3960 3 ปีที่แล้ว

      Sam problem for me bro

  • @mangudimarthadam..2493
    @mangudimarthadam..2493 3 ปีที่แล้ว +1

    அறுத்து தல்றிங்க

  • @mallikaranimallikaraniprab3214
    @mallikaranimallikaraniprab3214 2 ปีที่แล้ว

    Swami thabi thanks a lot I am waiting more educatine video from you.i subscribe d your work .GODBLESS YOU.
    .

  • @mahabooumahaboou4177
    @mahabooumahaboou4177 3 ปีที่แล้ว +1

    ஜெட் மோட்டார் ஒடீயும் தண்ணீர் வாரவில்லே காரணம்

    • @Seedsmonk
      @Seedsmonk  3 ปีที่แล้ว

      1. Water table level gone
      2. Pump footvalve out
      3. Seal broken

  • @venkateshg7041
    @venkateshg7041 3 ปีที่แล้ว +1

    Different between self priming and monoblock pump

    • @Seedsmonk
      @Seedsmonk  3 ปีที่แล้ว

      Self priming is updated version of all recent pumps, monoblock is a type indicating the in impeller housing.
      Thanks for the comments bro.

    • @venkateshg7041
      @venkateshg7041 3 ปีที่แล้ว

      @@Seedsmonk different between self priming and slow speed pump

  • @learningpoint_arts
    @learningpoint_arts ปีที่แล้ว

    30adiku evlow pressure set pannum ji

  • @ibrahimsyed511
    @ibrahimsyed511 4 ปีที่แล้ว +2

    Thank you sir.

  • @socialmedia2270
    @socialmedia2270 2 ปีที่แล้ว

    Oil cheel change 1.5 hp jet motor video pannuga bro

  • @karans6805
    @karans6805 2 ปีที่แล้ว

    Bro 800ft mono block compressor lift pannuma

  • @kesavakumarmurugesan5824
    @kesavakumarmurugesan5824 4 ปีที่แล้ว +1

    Very nice iwant how to bearing change

    • @Seedsmonk
      @Seedsmonk  4 ปีที่แล้ว

      It's quite a long process bro, dismantling & taking off bearing with puller...oops, plz take care of seals before so.

  • @karthikeyanv9551
    @karthikeyanv9551 ปีที่แล้ว

    Super explanation
    Thank you

  • @yuvaraj873
    @yuvaraj873 3 ปีที่แล้ว

    Anna enga vetla ore connectionla intha motor kuda mini motor vachurukom. Mini motor use panumothu pressure valve tight pananuma ila lose pananuma

  • @sundarv9729
    @sundarv9729 2 ปีที่แล้ว

    நீங்கள் சென்னையில் வசிக்கிரீர்களா?

  • @moses12694
    @moses12694 2 ปีที่แล้ว

    Super information when it's needed

  • @flowflowinfo8027
    @flowflowinfo8027 2 ปีที่แล้ว

    Ithu technology ha... pundai

  • @vasudevanbalakrishnan6665
    @vasudevanbalakrishnan6665 2 ปีที่แล้ว

    Very nice explanation. Great..

  • @umag3866
    @umag3866 4 ปีที่แล้ว

    Sir jet motor use pannurom 8 years akuthu water tank la romba slow va viluguthu.. 1hour aguthu 500l kku but Engalukku bore la water irukku nnu solluranga ippo seekirama tank niraya oru idea sollunga sir pls...

    • @Seedsmonk
      @Seedsmonk  4 ปีที่แล้ว

      Sure madam.
      1. Adjust the flow regulating valve.
      2. Clean/ change foot valve, impeller units if necessary
      3. Use motor during early morning hours, use regularly...refill to recharge, don't follow empty fill cycle.

  • @mangudimarthadam..2493
    @mangudimarthadam..2493 3 ปีที่แล้ว

    சரியான மொக்க ப்ரோ...நீங்க

  • @vijendransukumar
    @vijendransukumar 3 ปีที่แล้ว

    Hi Shiva, mine is 1.5hp cri. Water leaks at the pressure regulating valve. Is the problem with the gasket inside pressure value?

    • @Seedsmonk
      @Seedsmonk  3 ปีที่แล้ว

      Yes there must be a problem.

  • @skamal1019
    @skamal1019 3 ปีที่แล้ว +1

    Enna pirachana valula

    • @Seedsmonk
      @Seedsmonk  3 ปีที่แล้ว

      Flow sariya varalaaa bro

  • @its_sagaa_8455
    @its_sagaa_8455 4 ปีที่แล้ว +1

    Tq bro

    • @Seedsmonk
      @Seedsmonk  4 ปีที่แล้ว +1

      Thanks for watching bro.

  • @prasanna1202
    @prasanna1202 3 ปีที่แล้ว +1

    Very useful bro, almost 11:00PM pump wasn't working and I was looking for technicians but no one came then I watched your video and fixed the problem... Thanks again

    • @Seedsmonk
      @Seedsmonk  3 ปีที่แล้ว

      That's a great work bro. Happy mechanistic

  • @sunilgupta-tq3he
    @sunilgupta-tq3he 3 ปีที่แล้ว +1

    Are yaar Hindustan Mein Ho Hindi bolo na pura Desh sunega samjhega jaanega

  • @kannankannan994
    @kannankannan994 3 ปีที่แล้ว +1

    Bro jet moter la single pipe use panni 10 fit varaium water edukalama

    • @dot2015
      @dot2015 ปีที่แล้ว

      Yedukkalam 18 feet varaikkum