years ago used to go on car cruises with a mate who had a r33 skyline gtr and one of his mates had a garage and he built a capri 4x4 with a cossie engine. and in corner of his workshop he had a shell of a cossie 3 door was a thunder saloon with orange arches. he was from over near saddleworth moor near manchester he was called rusty he used to race his capri against other cossies
The process is correct mate but it's dependent on what type of cast it is. back in the day I worked down Hendon near the shipyard and I done a welding course at wearside college and I asked to do cast welding. You can buy rods/wire designed for welding cast. Done many a cast welding job.
I'd recommend using the Simoniz engine paint in the future Adam, I've used the Hycote stuff in the past and I'm not a fan, I use the Simoniz stuff on bike engines, frames, forks and so on and it's brilliant stuff, it's enamel based so takes a while to dry but it's really tough and looks like powder coat when cured, I've had a fuel filter come loose and pour neat fuel all over it and just left it to dry and it didn't so much as stain it, same goes with oil and all. You can get it in Matt/satin/gloss black and aluminium silver.
The Exhaust manifold gas temp sensors could be difference between melting a piston and not fella. Massive safety feature for big power cars given thebl heat produced. They didnt look in best condition mind, but something i would certainly consider if budget allows and your ECU can utilise
Just subbed remember i used toi watch you years ago doing your 3 door up. my cars been stood years and look in a sad state. started buying turbo kits and nos and fuel kits from america boost logic and powerhouse racing and buying stuff for single turbo big power but planns change like buying house and car got put on back burner. love watching car chans have you seen cleetus macfarland. its crazy how prices have gone through the roof makes you wonder who can afford to keep up. i bought a full set of brand new lights in group buy years ago for £550 now you talking 2k just for front lights. great investment long term. good to find your chan again be good to see you"re turbo kit come together
No, he should be held accountable for this. You can literally go with any sponsor, why choose gambling? well, we know why...but to see some moral decisions here wouldn't hurt.
Ceramic coating would be good on the inlet but I know you like doing stuff your self so even black wrinkle paint would look good again, using the over again mrs will love you 😂
Top job on down pipe welding like the way u sorted it out. Always good to have a understanding misses & oven. Looking forward to seeing this run. 😎😎👊👊👍👍✌✌👌👌
You got anyone interested in a mint white 2wd mate 80k 3 owners with massive upgrades won on a competition it is perfect example looking around 30k could be worth anything this one. 👍🏻
Great job on manifold mate!!! Something I would try myself. I reckon if a 1000 ppl give you £7.75 then your sorted. Let me start it off.... Good luck 🤞🍀 money sent!👍
Martin hadland @ rayland Motorsport used to do that exhaust manifold external wastegate conversion,he be a good person to contact if you need any help along the way..
Love how you say about your girlfriend it’s not like she can’t just watch the videos 😂 You’re doing a great job mate can’t wait to see what you’re putting it in.
Did say in last vlog hope not the pulsar unit,the shafts bend on them so easily, happened to jamie O,G teg, you'll regret using and will waste so much time with that turbo unit, should've went with a holset turbo..
Bloody hell adam 500bhp is starting to get really expensive , when u consider a 330bhp kit is about £1000 the price jump to get to 500 is ridiculous 😂 great content as usual
Surely it won't get to that sort of doh , bloody hell i had a few cosworths back in my early 20's when they wasn't that desirable and i remember when the black Siemens injectors come on the scene and i had a early 4x4 sapphire which was motorsport developments demo car and i bought it for 5k and it was proven 400bhp and it had 55lb black injectors a msd custom chip , 500 cooler and a t34 , 63 turbo spiked 34psi and held 29 all the way to the limiter and i used to beat everything , there wasn't much back then apart from the odd lambo and ferrari that was fast enough to beat me , these days a stage 1 golf r would most certainly be quicker
Not at all. There’s so much information out there. He probably has a network of people to contact to do it correctly. He’s an engineer/machinist I believe. I’m an ex qualified mechanic. It’s not rocket science as long as you take your time to make sure it’s done properly.
@@gdfgggggrubbish. 500bhp YB builds you need to know what you are doing. For a start he thinks he can get 500bhp on standard single row injectors. He's going to run out of injector duty right away and torch the engine right away. Also you cannot weld cast like that it will fail after a few heat cycles. This is basics and he cant even get them right. You do apreciate that when you run out of injector you automatically run the engine overly lean yeah? Righ so Adam overlooked that part so clearly does not have the knowledge required. Its easy to throw enough boost down anything to make 500bhp but making it hold 500bhp and last is another story.
Cant weld cast like that and running 500bhp on them injectors is whats melting pistons. You do realise the second you run out of injector duty your injector is then acting like a blow torch running super lean yeah? Hmmmm I like you Adam but you get quite a lot wrong bud maybe speak to mechanics before you wreck a cosworth block
![เปิดคำทำนาย นอสตราดามุส - บาบา วานก้า ปี 2025 คนทั่วโลกต้องเจออะไรบ้าง? | แฉ 11 ธ.ค. 67 [2/3] |GMM25](http://i.ytimg.com/vi/xmTIKWJUMPM/mqdefault.jpg)
Check out Gaminator now by clicking this link fellas
clik.cc/6ECrO
Cheers, haven't played a bandit in years
Your gonna want those intake temp sensors if you want to tune in 500bhp!
years ago used to go on car cruises with a mate who had a r33 skyline gtr and one of his mates had a garage and he built a capri 4x4 with a cossie engine. and in corner of his workshop he had a shell of a cossie 3 door was a thunder saloon with orange arches. he was from over near saddleworth moor near manchester he was called rusty he used to race his capri against other cossies
The process is correct mate but it's dependent on what type of cast it is. back in the day I worked down Hendon near the shipyard and I done a welding course at wearside college and I asked to do cast welding. You can buy rods/wire designed for welding cast. Done many a cast welding job.
Loving your enthusiasm and details on everything you do 👍
I'd recommend using the Simoniz engine paint in the future Adam, I've used the Hycote stuff in the past and I'm not a fan, I use the Simoniz stuff on bike engines, frames, forks and so on and it's brilliant stuff, it's enamel based so takes a while to dry but it's really tough and looks like powder coat when cured, I've had a fuel filter come loose and pour neat fuel all over it and just left it to dry and it didn't so much as stain it, same goes with oil and all. You can get it in Matt/satin/gloss black and aluminium silver.
Definitely port match that manifold to the turbo and head.
Top top video as always Adam. Going from strength to strength. Congratulations on a brilliant channel 🎉
Ha ha “the game I go to to wind down after work” of course you do.
As always great work Adam.
The manifold does look factory in Matt black.
Very tasty after a hour in the oven
Outdoor paint booth 😂 nice one Adam 👍
Can’t wait to see this beast when it’s done Adam great content as always 👍🏻
17:46 _"If you see me out with my girlfriend, do not mention this board"_ 😂
Hello Adam & fellow viewers! I think maybe a matt grey crackle effect on the inlet would be kool - this is an awesome project cant wait for Dyno day!!
Great video Adam.
The Exhaust manifold gas temp sensors could be difference between melting a piston and not fella. Massive safety feature for big power cars given thebl heat produced. They didnt look in best condition mind, but something i would certainly consider if budget allows and your ECU can utilise
Don’t use that inlet manifold Adam. That will be the reason the last engine melted a piston.
Lol 😂
@@mrhappyscooters?
Just subbed remember i used toi watch you years ago doing your 3 door up. my cars been stood years and look in a sad state. started buying turbo kits and nos and fuel kits from america boost logic and powerhouse racing and buying stuff for single turbo big power but planns change like buying house and car got put on back burner. love watching car chans have you seen cleetus macfarland. its crazy how prices have gone through the roof makes you wonder who can afford to keep up. i bought a full set of brand new lights in group buy years ago for £550 now you talking 2k just for front lights. great investment long term. good to find your chan again be good to see you"re turbo kit come together
Don’t tell mrs 😂😂well done mate more parts fir the build super job mate it’s all coming together now it’s gonna be rapid once it’s built 👍🏽👍🏽
Take no crap from anyone, your doing a fab job! I am enjoying your engine videos! Top Bloke ☺️☺️☺️
The American version of the Ford sierra is called the merkur
Satain textured paint is nice on the inlets
Another cracking video Ad, I can’t wait to see this thing run. 👏🏻
I’d have that turbo checked. Those bolts came out way too easily looks like it’s been apart recently
I was thinking the same 🤔
😂I love that, “if u see me girlfriend Don’t mention the board” 😂 we’ve all gonna bit ott on projects.
I'm confused thought this was up for sale no?
That was a belting line, Left them out in the sun to bake overnight
I love you ad but as someone who’s struggling with addiction the advertising doesn’t help me. Understand you got to make a crust pal ❤
No, he should be held accountable for this. You can literally go with any sponsor, why choose gambling? well, we know why...but to see some moral decisions here wouldn't hurt.
Outside in the sun to bake overnight😂
Luck finding a swap deal on the parts. You have a decent turbo and the other bits will help start the engine build.
Are you putting this in the 3 door? Can’t remember if you said or not on the previous videos.
Ceramic coating would be good on the inlet but I know you like doing stuff your self so even black wrinkle paint would look good again, using the over again mrs will love you 😂
You can only braze cast Adam lad.
Great stuff Adam, just great - I'm Loving your stuff and I've sent you a coffee -keep them coming mate 😅😅
Amazing. Thanks a lot Paddy 😊👍🏼
Oooh, Nearly missed an episode of Come Dine with Me: Cossie Edition
😂😂
You CANT MIG CAST!!!!
You can.
Never seen cast mig welded like
You have to heat the whole casting up it is dodgy welding cast whether it's successfull or not
Yes you can lol
@@mrhappyscootersNo you cant, it will last about 10 heat cycles. Im a marine welder 4 decade. Why you loling?
Manifold would be better to have Ceramic Coated
Never the same when there welded i think
Its a waste of money on a standard manifold. Better do it on a high flow manifold and the turbo.
Don't mention the board to me girlfriend 😂 😂😂
Adam what is going on with the car your selling
Good luck to you m8, but use a spanner as a hammer. Buy a Hyde and copper mallett....
What's in the oven for dinner? Oh manifold. 🤣🤣
Top job on down pipe welding like the way u sorted it out. Always good to have a understanding misses & oven. Looking forward to seeing this run. 😎😎👊👊👍👍✌✌👌👌
Great video mate. I follow many TH-cam rs. Keep up the good work. I won concourse in 2008 at national day with a moon dust saph. I know cosworths.
Tip top job pal 👍🏻
You got anyone interested in a mint white 2wd mate 80k 3 owners with massive upgrades won on a competition it is perfect example looking around 30k could be worth anything this one. 👍🏻
Wicked content as always mate.
Barum payment?,have i missed a vlog?
Hope you are going to have the turbo at least checked to make sure its all good not just bolt it on
Always great 2 see what your doing Adam keep it up mate 👍 👏 👌
The shopping list Cost list so far.
Did you have a special deal with Gordon 😊
Put the engine in your saph. Sell the yb out of that to fund your next project
I've seen blokes online using Barby que to heat item to be welded 200 300c and then brazing and just as I write this you did the same 😅😅😅
Lol 😂don’t mention the cost to me bird 😂😂😂lol Adam believe me she knows she’s watching your videos on the sly 😂😂😂😂
Top stuff mate
Marty's owld magenta saph.?
should just go for 1000 bhp adam that seems about the norm these days !!!
1000 bhp is so last year... It's all about 1500 bhp these days.
Great job on manifold mate!!! Something I would try myself. I reckon if a 1000 ppl give you £7.75 then your sorted. Let me start it off.... Good luck 🤞🍀 money sent!👍
You left it out overnight in the sun?😮
Braze cast with bronze rods
500bhp on a standad injectors and injector rail??? good luck boom..😂😂😂
ikr hes gunna torch his engine soon as it runs out of injector duty
Do not mention this board LOL LOL superb dude thanks again great content
Top channel mate
Love this TH-cam channel
I left it to bake overnight on the washing line 😃
"dinna tell our lass", you don't even sound like you are joking...
sold the saffy yet?
keep up the good vids
This is going to be a long auld build
Martin hadland @ rayland Motorsport used to do that exhaust manifold external wastegate conversion,he be a good person to contact if you need any help along the way..
Spot on channel 💪🏽🇬🇧👍🏽
Love how you say about your girlfriend it’s not like she can’t just watch the videos 😂
You’re doing a great job mate can’t wait to see what you’re putting it in.
If you see Adam out with his girlfriend, do not mention this channel. 😂
@@yutehube4468 😂 😂
Do it in the Honda crackle but in black Adam
Did say in last vlog hope not the pulsar unit,the shafts bend on them so easily, happened to jamie O,G teg, you'll regret using and will waste so much time with that turbo unit, should've went with a holset turbo..
pulsaaarrrr turboooo
You can't weld cast like that you need cast welding rods
Sand blast the inlet manifold for a factory look rather than matt black
I hope you welded with a high nickel content 😁😁😁 cracks will appear otherwise
O yeah it will crack , Mig wire lol😊
You need a kit car to put this engine in
What’s for T
A MIG welder won't weld cast iron, it will crack again
And you still need a car to put it in 😂😂 going to be 25k+😅😅
Top tip. ERASE THE WHITEBOARD 😂😂😂😂
admam my friend get a bed fitted in that garage shes deffo gona kick u out coming on tho....
my mrs doesnt watch my videos either thank god lol
Wor lass will kill you for having that oven on fir so long using all that lekky should have put some chips in for yaself 😂😂
Who's tuning advice did you seek before buying that lot? Adam don't use that shape inlet, a Hart style would be best.
I'm gonna grass you up to your bird lol
Bloody hell adam 500bhp is starting to get really expensive , when u consider a 330bhp kit is about £1000 the price jump to get to 500 is ridiculous 😂 great content as usual
You wait when he's near 12k because he's going to have to give it to a specialist if he want it to last
Surely it won't get to that sort of doh , bloody hell i had a few cosworths back in my early 20's when they wasn't that desirable and i remember when the black Siemens injectors come on the scene and i had a early 4x4 sapphire which was motorsport developments demo car and i bought it for 5k and it was proven 400bhp and it had 55lb black injectors a msd custom chip , 500 cooler and a t34 , 63 turbo spiked 34psi and held 29 all the way to the limiter and i used to beat everything , there wasn't much back then apart from the odd lambo and ferrari that was fast enough to beat me , these days a stage 1 golf r would most certainly be quicker
Leave them out to bake in the Sun overnight. Classic one Adam.
Different weather Oop north mate 🤣🤣
That hycote spray paint is not great,flakes off fast,try another paint
Not trying to find fault but to build a 500hp motor that will last more than a week . With no experience of engine building is a reach
Not at all. There’s so much information out there. He probably has a network of people to contact to do it correctly. He’s an engineer/machinist I believe.
I’m an ex qualified mechanic. It’s not rocket science as long as you take your time to make sure it’s done properly.
@@gdfgggggrubbish. 500bhp YB builds you need to know what you are doing. For a start he thinks he can get 500bhp on standard single row injectors. He's going to run out of injector duty right away and torch the engine right away. Also you cannot weld cast like that it will fail after a few heat cycles. This is basics and he cant even get them right. You do apreciate that when you run out of injector you automatically run the engine overly lean yeah? Righ so Adam overlooked that part so clearly does not have the knowledge required. Its easy to throw enough boost down anything to make 500bhp but making it hold 500bhp and last is another story.
Throw the bleed valve in the bin.
Cant weld cast like that and running 500bhp on them injectors is whats melting pistons. You do realise the second you run out of injector duty your injector is then acting like a blow torch running super lean yeah? Hmmmm I like you Adam but you get quite a lot wrong bud maybe speak to mechanics before you wreck a cosworth block
My Honda swapped Merkur makes 500 for less money
honda or cosworth.. Jeez let me think😂 Yeah nahh pal a YB blows your honda engine away
@@bigduphusaj162 we’ll see
Bore off TH-cam Welding experts just enjoy the video
This is a great channel...but your sponsor for online slot machines is a major turn off. Gambling is something that shouldn't be promoted.
Don’t get involved in gambling stick to the program!
Always stick weld cast