Immerse the brick specimens in water at a temperature of 27 ± 2°C for 24 h. Remove the specimens and drain out any surplus moisture. Remove unevenness observed in the bed faces to provide two smooth and parallel faces by grinding (see Note). Use a cement/sand mortar for capping and filling the frog (where provided) and all voids in the bed faces, expected to attain a minimum compressive strength, when tested in accordance with IS 4031 (Part 6) at the time of testing the brick specimens, at least that of the expected brick strength. Store under the damp jute bags for 24 h followed by immersion in clean water for 3 days at a temperature of 27 ± 2°C. Remove, and wipe out any traces of moisture. IS 3495 part 1 please read
❤❤❤
Acha explain
nice, information
Nice👍👍👍👍 video🙏🙏🙏🙏 sir ji
Good job bro
Very good sir
Immerse the brick specimens in water at a temperature
of 27 ± 2°C for 24 h. Remove the specimens and
drain out any surplus moisture. Remove unevenness
observed in the bed faces to provide two smooth and
parallel faces by grinding (see Note).
Use a cement/sand mortar for capping and filling the
frog (where provided) and all voids in the bed faces,
expected to attain a minimum compressive strength,
when tested in accordance with IS 4031 (Part 6) at
the time of testing the brick specimens, at least that of
the expected brick strength. Store under the damp jute
bags for 24 h followed by immersion in clean water for
3 days at a temperature of 27 ± 2°C. Remove, and wipe
out any traces of moisture. IS 3495 part 1 please read
Thx
Nice video sir
Very good👍
Average compressive strength kaise find krenge sir
Load/cross section area
ধন্যবাদ দাদা
👍
Material testing lab ka practical Hindi me bhejega
5:05 ye konse is code mai likha hai
Flyash brick strength 710 KN
Compression with others like stone brick cement brick normal brick
Saaarji baaki sb thik hai bs brick ki spelling galat hogyi 😅
Galt mathod