Will there be any difference in strength if we use sulphur capping vs sand capping? I think that sulphur capping provides more smooth surface as compared to sand capping which gives bit uneven surface. Please comment. And also what does ASTM advise? Suplur or sand?
Its easy to calculate manually, our aim is to calculate compressive stress and stress is calculated by Load divided by area, from machine just take the Peak load and also it gives area automatically or you can do length X breadth and just substitute in Load/Area and get the stress
Thanks for your video. Can we know which standard method is used for this test?
hello ttheint, the method shown in this video is standard method, and thanks for appreciation
The whole surface of the brick is not covered!
Use plates to get right results.
Will there be any difference in strength if we use sulphur capping vs sand capping? I think that sulphur capping provides more smooth surface as compared to sand capping which gives bit uneven surface. Please comment. And also what does ASTM advise? Suplur or sand?
But IS Code only suggest to fill with mortar 1: 3 , not with sand, instead you can use plaster of paris
Sir , I have one doubt
How many days tests will be perform on clay bricks after moulding and firing .
What is the ideal compressive strength in order to use in residential construction
It depends on your requirements, in market there are different classes of bricks
Please make video of tests on compressed Interlocking red clay bricks and are these bricks good for construction in Maharashtra?
I will try Tushar
I have a brick field at kanpur so i want to do all test and certify my brick field with iso .....where i can conduct this test
Any good engineering college will have their consultancy where they test different materials, consult any good college near by your area
For greater reach, I recommend breaking down the explanation in non technical terms.
Thanks for your helpful video
Happy to help
If I used masala(send and cement mixture) in it, then the #compressive strength grows more I think 👍
Sir please tell me lab test for bricks only compression strength test ?? Another method
Sir , why we fill the frog of brick during testing
how much was it in psi?
But sir piston is not covering the total area, so how can we devide by this area?
What about Pace?? Sir
Thank you sir... 🙏👍
Most welcome, all the best, keep watching and sharing
What is the comprehensive strength of the brick?
It depends upon class of brick
What is the loading rate here?
What is standard value for compressive strength....???
It depends upon class of bricks
Please show us the calculation as well along with the test.
Its easy to calculate manually, our aim is to calculate compressive stress and stress is calculated by Load divided by area, from machine just take the Peak load and also it gives area automatically or you can do length X breadth and just substitute in Load/Area and get the stress
Go and check out these videos on nctel channel you'll get detailed information about everything alongside practical
Tq very much sir .
🙏
Thank sir any test for sand
Already uploaded sieve analysis and specific gravity of sand, kindly go through it
Hi sir how to check interlocking block compression test
Load should be applied uniformly on bricks
Pace rate kya heybro
Minimum brick??
#70kg/cm² strength ka matalab kya huwa
compressive stress
I am not understood this video
Mpa- mega pascals
Brick projected outside of loadin area. 🙄🙄🙄. Worst testing procedure
Comment though not able solve machine problem. Please send your email id