Man god bless you for this!!! You are the best. My engine is twitching before starting, gonna have to change the alternator 🙏🏼🙏🏼 The video was so helpful thank you so much
THANK YOU SO MUCH !!!!. First time changing one, and your video made it perfect for me i already work on cars so it took me about 30 mins . MANY BLESSINGS TO YOU AND YOUR CHANNEL!!! 💯💪🏽❤
I suspect the wrench used to loosen to belt tensioner to be longer than the average one as to get to the bolt , 12 inches or ? And would it matter if the wrench was open end or closed end ? I replaced the alternator on my 2020 Toyota Camry . Though unfortunately belt has come off the other pulleys . Now to see if I could replace it correctly . I had used a 12 inch both closed end wrench . Though it would have been better to use an open end . Better angle for the wrench as in leverage . I have a mobile mechanic coming on Sat. so I should let him do it or check my work . And since , I will buy a new belt , though present one has no cracks , etc. Car has 70000 miles on it , so why not .
Looks super easy fars as replacement but only thing I would highly recommend please put power cable on first then the negative battery cable cause putting on the positive battery cable will power to the system then you want to put ground to the system not following those directions will cause some serious damage to some sensors on your car which is called a voltage spike they very costly I toke a electrical class in automotive school and I have a associates degree and automotive autobody and computers.
Buddy, even the Toyota Manual always states to disconnect Neg. Battery Terminal... not a single person on any forums or channels or discussion boards has ever run into a problem doing this.
Man god bless you for this!!! You are the best. My engine is twitching before starting, gonna have to change the alternator 🙏🏼🙏🏼 The video was so helpful thank you so much
This is the beauty of Toyota. Simple to repair. DIY friendly. Don’t need to take half the engine apart to replace
Best video I have ever seen!!! Saving this for future repair. Simple and clear instructions!
thanks 👍
It’s actually 10 mm and 12 mm for the alternator. 14 mm to remove the belt. I did mine today
Your video makes it look so easy and smooth. Great video took me 1 hour.thanks.
THANK YOU SO MUCH !!!!. First time changing one, and your video made it perfect for me i already work on cars so it took me about 30 mins . MANY BLESSINGS TO YOU AND YOUR CHANNEL!!! 💯💪🏽❤
Thanks! QUick and straight to the point, not like some of these other vids!
My man that was clear and precise, I have a 2020 camry and I'm gonna use this for when I change my alternator thanks!!!!!
Damn shame I got my genuine 80 amp alternator since 97 in my Celica Turbo thought Toyota would've held up at least ten years ty though God bless you
I was wondering if I could get a list the sizes of sockets you used
I suspect the wrench used to loosen to belt tensioner to be longer than the average one as to get to the bolt , 12 inches or ? And would it matter if the wrench was open end or closed end ? I replaced the alternator on my 2020 Toyota Camry . Though unfortunately belt has come off the other pulleys . Now to see if I could replace it correctly . I had used a 12 inch both closed end wrench . Though it would have been better to use an open end . Better angle for the wrench as in leverage . I have a mobile mechanic coming on Sat. so I should let him do it or check my work . And since , I will buy a new belt , though present one has no cracks , etc. Car has 70000 miles on it , so why not .
Looks super easy fars as replacement but only thing I would highly recommend please put power cable on first then the negative battery cable cause putting on the positive battery cable will power to the system then you want to put ground to the system not following those directions will cause some serious damage to some sensors on your car which is called a voltage spike they very costly I toke a electrical class in automotive school and I have a associates degree and automotive autobody and computers.
Buddy, even the Toyota Manual always states to disconnect Neg. Battery Terminal... not a single person on any forums or channels or discussion boards has ever run into a problem doing this.
4 cylinders super easy.
Thank you
How many miles were on this one when u replaced alternator?
I never looked at the mileage, the alternator was still good I just wanted to make a how to video to replace it to help out others
Damn shame I got my genuine 80 amp alternator since 97 in my Celica Turbo thought Toyota would've held up at least ten years
Easy $200 need tips on up-charge
The nuts on the bottom of mine were 12mm instead of 14