At 10:40 into the video, note that they installed the valence bar UPSIDE DOWN and BACKWARDS. If you follow this video and how they did this, it will drive you nuts. Also note that they must have figured it out by the end of the video because they have reversed it and it is then installed correctly. Don't wait until the end to find out!
I was confused by that too. The instructions are terrible and don't have a good picture, but I can confirm that this video installs the front bar backwards. Don't do it like the video.
Thanks for putting this video on. I worked on it over 4 hours but most of the things I’ve done turned out to be wrong. I watched you doing it and I believe it is ok. What happened to the two white plastic sleeves going over an Allen end screws to be fixed 12” away from the ends. What is their function. I’ll appreciate hearing about it.
Hi. Thanks for watching I installed it a few years ago. I can't remember. But there is some missing part of installation in the video. Sorry about that
Thanks for posting this video it's been a great help in putting the awning together. I live in Spain so it came with instructions in pidgin Spanish and it's not very clear. One thing that I can't find anywhere in the "instructions" is the measurement between the wall brackets. Does it have to be exact or is there any margin for error?
Brackets has to be between end of the each main bar side and the were arms attached to the main bar. So 6 inch each in from the each end side. I don't if I could explain it clearly
We had trouble following this video because they didn't show each step on film. They would make changes off camera and not explain. The end of the video show's correctly how the awning should look once completed, but that's not how they showed it during assembly.
they installed the front bar at the front end of the awning upside down, but must have corrected it later. The front of the fabric should have gone in the narrow slot of the front bar, not the slot on the flat end that shares the "arm bar link" (T-shaped metal piece that slides in to the channel)
@@cinemachinery - I’m literally fixing this problem right now because I, too, installed it upside down, and when it came time to stand back & admire my success before actually hanging it, I realized that if I hung it the way it was, the awning would open down toward the ground, not out, over the patio 😂 It seems like they must have corrected it offscreen because it took me like 4 hours to realize what the problem was on my end, and that it no longer looked as though the awning in the video had the same problem. I will say though, I could NEVER have figured this out without this video…even with the couple of small omissions. The written instructions included are essentially useless, and opening the box was entirely overwhelming. “Some assembly required” has never looked so terrifying! 😂
Hi there... there are plastic posts - approx. 2inches long that get attached in the same slot as the tbars on the mainframe.. I think. E1 and E2 parts.. they stick downward and are supposed to be set 7.9 inches IN from where the outside edge of the hinge on the retractable frame Is.. you don’t show assembly of this, what it looks like when completed, or how they work after it’s together.. I think we’re having a problem with ours... is it possible to add a pic or video somehow of how they work.. absolutely NO legible instructions on the so called instruction sueet/ 🤦♀️🤷♀️😢
Does anyone know the distance part G (the T-shaped piece) he uses at 10:29? those parts broke on me twice and i can't find more details on this. Thanks!
Hello all !! What to say about video ? It is ONLY ONE for this brand video how to DIY but no voice guidance. We can see why, but nevermind. The guys did not USED A PART # E-1 ??? Why ? Only awning is nice and cheap price due to "SOUTH ASIAN" manufacturer. For that reason perhaps YOU DON'T GET INSTRACTION BUCKLET IN ENGLISH !!!!! French and Italian and especially GO FIGURE theirs mesaurments, where to install on both ends the "streach arms" ?!?! Also be aware that this awning could be installed only on the wall, they don't have a parts/brackets for ceilling option. Go figure and yet the video is for deaf-mute audience. Thanks
@@PlentyofVideo , Tnx seems you are quite skilled guy and actually You could get more sub’s but with voice. Honestly I saw few videos and already have one tip handy which I will show to my hubby. 😁.... just please add voice to explain audience how and why. Tnx
What is part "e-1" and where does it go? The instructions that came with this awning are terrible. This video is good but I wish it had sound. Please help with any info you have.
Considering that it wasn't created by the factory, it helps a lot as the guy did what he could. If you don't like it to the point that you have to leave your terrible comment, then you should make your own video tutorial.
![เปิด อาณาจักร หมื่นล้าน "สาระตั้ม" l [Nickynachat]](http://i.ytimg.com/vi/3XE0nPF4YkQ/mqdefault.jpg)
![PASULOL รามเกียรติ์ ตอนที่ 4 นนทกพบรัก [Ramakien Ep.4: Nonthok in love]](http://i.ytimg.com/vi/tMUQgmZzf_A/mqdefault.jpg)
At 10:40 into the video, note that they installed the valence bar UPSIDE DOWN and BACKWARDS. If you follow this video and how they did this, it will drive you nuts. Also note that they must have figured it out by the end of the video because they have reversed it and it is then installed correctly.
Don't wait until the end to find out!
I was confused by that too. The instructions are terrible and don't have a good picture, but I can confirm that this video installs the front bar backwards. Don't do it like the video.
@colemanwatts3588 you are right
That's right
Thank you so much for sharing your video with good camera views too. It'll help me install my Outsunny awning soon. ❤
You're welcome. Thanks for watching.
Thanks for putting this video on. I worked on it over 4 hours but most of the things I’ve done turned out to be wrong. I watched you doing it and I believe it is ok. What happened to the two white plastic sleeves going over an Allen end screws to be fixed 12” away from the ends. What is their function. I’ll appreciate hearing about it.
Hi. Thanks for watching
I installed it a few years ago. I can't remember. But there is some missing part of installation in the video. Sorry about that
Good job 👏
Thank you! Very helpful.
Thanks for watching
REALLY NEED SOUND, this would have been perfect, but helped a lot!!
Sorry about that. I will add a music on it. Thanks for your suggestion 😊
Thanks for posting this video it's been a great help in putting the awning together. I live in Spain so it came with instructions in pidgin Spanish and it's not very clear. One thing that I can't find anywhere in the "instructions" is the measurement between the wall brackets. Does it have to be exact or is there any margin for error?
Brackets has to be between end of the each main bar side and the were arms attached to the main bar. So 6 inch each in from the each end side. I don't if I could explain it clearly
@@PlentyofVideo Thank you for replying. We are just about to install it now. 🙄
Np. Please update us with you installation
We had trouble following this video because they didn't show each step on film. They would make changes off camera and not explain. The end of the video show's correctly how the awning should look once completed, but that's not how they showed it during assembly.
they installed the front bar at the front end of the awning upside down, but must have corrected it later. The front of the fabric should have gone in the narrow slot of the front bar, not the slot on the flat end that shares the "arm bar link" (T-shaped metal piece that slides in to the channel)
@@cinemachinery - I’m literally fixing this problem right now because I, too, installed it upside down, and when it came time to stand back & admire my success before actually hanging it, I realized that if I hung it the way it was, the awning would open down toward the ground, not out, over the patio 😂 It seems like they must have corrected it offscreen because it took me like 4 hours to realize what the problem was on my end, and that it no longer looked as though the awning in the video had the same problem.
I will say though, I could NEVER have figured this out without this video…even with the couple of small omissions. The written instructions included are essentially useless, and opening the box was entirely overwhelming. “Some assembly required” has never looked so terrifying! 😂
I am curious as to what hight you installed it at and what was the hight at eh end of the retraction.
7ft hight. 10ft
Merhabalar tavana monte oluyormu bu modelden?
Thanks.
Typical Indian style installation, complete disregard for the coating on the metal.
Awning installation depends on different factors
Perfect tutorial Very nice installation!
Can you tell me the size of that awning please !
I guess it was 10 feet.
Hi there... there are plastic posts - approx. 2inches long that get attached in the same slot as the tbars on the mainframe.. I think. E1 and E2 parts.. they stick downward and are supposed to be set 7.9 inches IN from where the outside edge of the hinge on the retractable frame Is.. you don’t show assembly of this, what it looks like when completed, or how they work after it’s together.. I think we’re having a problem with ours... is it possible to add a pic or video somehow of how they work.. absolutely NO legible instructions on the so called instruction sueet/ 🤦♀️🤷♀️😢
I'm having the same problem
Does anyone know the distance part G (the T-shaped piece) he uses at 10:29? those parts broke on me twice and i can't find more details on this. Thanks!
I don't hear anything. Is there any sound?
Sorry I made a mistake while I was editing the video.
No body supposed to talk on this video. They just show how to install it
Thank you for responding. :)
What is th weight of this overall?
Main bangal ke Asansol se hun hame lagwana h 11feetx7 feet ka toh kaise milega aur kya ret padega please jaldi bataiye
Is there sound?
No sound sorry
Hello all !! What to say about video ? It is ONLY ONE for this brand video how to DIY but no voice guidance. We can see why, but nevermind. The guys did not USED A PART # E-1 ??? Why ? Only awning is nice and cheap price due to "SOUTH ASIAN" manufacturer. For that reason perhaps YOU DON'T GET INSTRACTION BUCKLET IN ENGLISH !!!!! French and Italian and especially GO FIGURE theirs mesaurments, where to install on both ends the "streach arms" ?!?! Also be aware that this awning could be installed only on the wall, they don't have a parts/brackets for ceilling option. Go figure and yet the video is for deaf-mute audience. Thanks
Sorry bro. I made a mistake and lost the audio while editing.
@@PlentyofVideo , Tnx seems you are quite skilled guy and actually You could get more sub’s but with voice. Honestly I saw few videos and already have one tip handy which I will show to my hubby. 😁.... just please add voice to explain audience how and why. Tnx
Ok. I will. thank you 😊
What is part "e-1" and where does it go? The instructions that came with this awning are terrible. This video is good but I wish it had sound. Please help with any info you have.
What is this name
How much
400$ CA+ tax from Wayfair.com
Where do you live?
Where can we buy
@Nova I just got one Outsunny 13x8 and installed it for under $200 from Walmart
Did you buy it just for 200$😃
@@PlentyofVideo it was $186.26 plus tax free shipping, dark brown.
Wow great price
@@PlentyofVideo thank you, I look up today and the price was $196.00 I think it's depends on the day you looking 😉
Valance could have been lined up a little better..... the fabric stripes. Otherwise, nice job!
That's right. Thanks
Don't hear any sound
Sorry about it. I lost the sound during editing
You guy's skipped some steps.
Don’t waste your time - no sound - why make an assembly/install video and not say anything? Absurd and ridiculous! 👎🏻
It is how to install an Awning without sound
M,35
Audio
It is how to install Awning without audio 🫢😊
Extremly unclear video, appricatided because there zero videos out there but very bad explaniton
I see. Sorry about that
This is a terrible instructional video with zero sound
Considering that it wasn't created by the factory, it helps a lot as the guy did what he could. If you don't like it to the point that you have to leave your terrible comment, then you should make your own video tutorial.