NAMI SCOOTER NFC upgrade

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ส.ค. 2024
  • Nami Nfc upgrade. it requires the following parts as a kit to do the upgrade
    1) new cable top side to have an extra plug for the NFC
    2) new dashboard, different hardware, and different software
    3) NFC and the cards come with it
    4) The new light and horn switch that light turns on.
    IPhone works as well, you could set the NFC into the learning mode, and copy the iPhone into it
    the two cards that come with the NFC are the mother card. the
    NFC could accept a total 5 extra cards or phones to be copied and used to lock and unlock
    • NAMI Electric NFC iPho... link shows how to connect the iPhone with the NFC
    you could send an email to shataofahm@hotmail.com for more info
    Once you upgrade the new dashboard, please re-do the setting
    The default voltage is 60v, and tire size is 10 inch, if you are using it on burn e, you need to change to 72v and 11 inch

ความคิดเห็น • 21

  • @mspring6387
    @mspring6387 ปีที่แล้ว +6

    To make this much easier, when you pull the cables out and up the stem, tape a pullstring (or string) before you pull them up and out. Then using that same pullstring, tape on the new connectors at the top hole and then pull them back down the stem. You will not need the hook. Also, it is a good idea to use a Sharpie (silver) and mark the julet connectors on both sides before you pull them apart so you know exactly which connector male goes with which female.

    • @McKuc
      @McKuc 3 หลายเดือนก่อน

      I think that they do not have the same amount of pins, so it is easy to connect back together.
      I like to use a 1,5mm² copper wire instead of a feed spring because the "head" is thinner. A wire is oftentimes not stiff enough.

  • @prankman9116
    @prankman9116 5 หลายเดือนก่อน +3

    hello what about android phones is there any app for it???

  • @peterchan9525
    @peterchan9525 ปีที่แล้ว +1

    Your English is too good for Chinese sales !!!

  • @edilsonlopez4081
    @edilsonlopez4081 4 หลายเดือนก่อน

    Very Nice 👌

  • @aimetti
    @aimetti 7 หลายเดือนก่อน +1

    Can get backlights better? Beacose whu follow me car or any transport not see me from back beacose bad lights..

  • @JulianRides
    @JulianRides ปีที่แล้ว +1

    And did you fix all the braking sensor problems on all klima scooters or on burn e-2's?

  • @alexling763
    @alexling763 2 หลายเดือนก่อน

    Hi I have the e2 max but now one key is not working! What can I do ? Thanks

  • @emilio13
    @emilio13 ปีที่แล้ว +1

    Did the Neweset Version of Nami Burn E3 max had the upgrade ???

  • @ThEGeo539
    @ThEGeo539 ปีที่แล้ว +1

    Hello, or buy the NFC controller?

  • @Raankar
    @Raankar ปีที่แล้ว

    Nice

  • @JuanManuelSuarezTriana
    @JuanManuelSuarezTriana 2 หลายเดือนก่อน

    What app , I need for put the Smart key on my phone I have Xiaomi too ?

  • @maciejgrodziski9987
    @maciejgrodziski9987 ปีที่แล้ว

    Hi,since when is NAMI KLIMA on sale with changed rear lighting? Best regards.

  • @Sndiversity
    @Sndiversity 3 หลายเดือนก่อน

    Where to order this ?

  • @skanderbenabdelkrim6332
    @skanderbenabdelkrim6332 ปีที่แล้ว

    Hello Michael, where to buy eventually? Regards.

  • @lucaspoole8866
    @lucaspoole8866 6 หลายเดือนก่อน +2

    Why can't my phone be used for a NFC card I have tried everything i have the Galaxy S23 Ultra?? Please help me

    • @G20vtr
      @G20vtr 3 หลายเดือนก่อน

      Me too, and nothing happens, i dont find any program to use it

  • @jonathannewman6144
    @jonathannewman6144 ปีที่แล้ว

    @Michael Sha, unlike with other android phones, there does not seem to be any way to copy an NFC tag into a Pixel phone so that the phone can be used to emulate the tag?

    • @cryptosp33d
      @cryptosp33d ปีที่แล้ว

      u can use any credit card or anything that has nfc technology

    • @G20vtr
      @G20vtr 3 หลายเดือนก่อน

      Like what program?

  • @Taras-v9w
    @Taras-v9w 6 วันที่ผ่านมา

    Hello, help me buy a used electric scooter with delivery to Ukraine.