Dude. Super informative, right to the point, highly detailed with everything I needed to know. No click baity thumbnails or ridiculous pointless showmanship/ bloat content. Fantastic video sir
Nice work on this video, I did purchase this case. It's not going to be used for gaming but my build will be Asus prime x670e, Ryzen 9 7900x with the ARCTIC Liquid Freezer III 280, 32 gigs of Gskill ddr5 memory. I haven't invested since 2016 so I thought it was time to get up to speed with something new. Cables are cables the way I look at it and once dealt with they are good properly managed. I looked at allot of cases and this one stood out for the panoramic's with thin framing. I do also like the more cubed design over the standard mid-tower. As far as cable management goes something they should add would be the grommets that others have and are missing on this version of the case. I do also like the fact that this case does not have a PSU floor vacuum cleaner that most employ. This one won't be on the floor but less dust bunny's at the PSU air intake the better. Considering what others are charging for something similar, it's a good deal. Price was 109.00 3.26.2024 129.00 with a 20.00 off coupon on Amazon. Just some thoughts on the subject.
thank you so much! I've been looking at this case for my mid-tier beginner's build, and I think I'm going to go ahead and grab one. Honestly, I like the stock fans more than I thought I would (smooth RGB), but time will tell once I actually receive the case. I already have a 3-pack of Corsair fans, and I might grab another 3-pack in the future.
Ill be buying this case soon for a Ryzen 7600x / RTX 4070 super build. Love the looks of it. And the higher cpu temps don't bother me as I will be getting a big 3 fan AIO, and Ryzen 7600x runs fairly cool anyway. Thanks for the vid.
I agree with your opinion that it is a great-looking case! I have my own white-build (Lian-Li case) and really enjoy how it turned out. This case, with the glass on both front and side, make a eye pleasing case! Again, appreciate your layman's opinions on what kind of cooling is most suitable for a case like this! 👍
I think it's a good case given the cost, it has usb 3.0 and type C 3.2 ports, an rgb fans hub, support for 200mm power supply... just replace the fans and you will see that the CPU temps will be better!! ... tomorrow it arrives and in addition to a costum loop with 2 rad 360mm I will put all Noctua 12x25 ... I'm sure it will be a great surprise given the ridiculous cost
I have an air cooler for my overclocked 5600x and the highest temps I've seen is 58C. This case is great. My GPU temps have dropped by 3 degrees! How has the case been for you?
Perfect, I have a 7950x and a 4080 with dual 360... Perfect airflow (I use Noctua fans).. I found a small vibration in the back panel, which was repaired by applying electrical tape to the inner rails. For what it costs it's very good @@msquirrel1
hiya, do you reckon this case in terms of temperature pefroms worse due to the stocks fans it comes with and would peform much better if i installed better fans and more fans? and if so by how much? great video , very informative
Hi. Thanks for the great review, and for actually showing the backside inside of the case, unlike other reviewers. I'm really interested in this case, however I have a modular Corsair RM1200x Shift PSU that has the cables coming out the side, rather than the front of the unit - looking at your photo after the PSU is installed it doesn't look like there would be much room for any cables in that setup; is that HDD bay above where you put the PSU removable, or even possibly relocatable? I would like to take that bay out, and either move it - or leave it out assuming there would be room for 3 HDD's and a few SSD's stacked on the bottom.
Thank you for your video !!! Already bought this few weeks ago, So I use AIO for CPU temp problem like your recommendation and changed all free Case Fan with Arctic P12 !! Works amazing !! PS : C3T500 Free stock case fan is quite bad like you said.
Hi, what option would you recommend for a regular Jonsbo D30, ¿ tl-c12pro or tl-b12 non extrem version? The case has mesh on the bottom and top. I would also like to use them in the future to upgrade to Liquida Custom. thanks for videos!
I am between this and the musetex y6 but I want to buy an air cooler deepcool ak 620 + 9 fans (TL-S12), do you think this configuration is bad for cases like this? I'm using a 7600x with 7800xt gpu, Thank you in advance! Great video 💪🏻
I've not tested the TL-S12's, but I believe they with preform much better than these stock fans. as for the AK 620 it will work, but not ideally. this case is meant / designed to have a liquid cooler for the CPU.
I like the Corsair RM series which comes in white but only @ 750w and 850w amzn.to/3RIOY1V silverstone as a new PSU that comes in white the DA750R Gold amzn.to/41IiHNe Hope that helps.
I have this case but only 2 fan rgbs change when I press the rgb button on the top I have looked at the fan hub and nothing looks loose or not plugged in and I don’t know what to do
@@Bash564 🤔... That's a weird one. I would try unplugging everything from the hub, so all of the fans plus the little connectors on the back of the hub. Then plug everything back in. If that doesn't work there's something likely wrong with the hub. Do you have it plugged into your motherboard? Because you could try switching it over to the motherboards RGB software to see if that fixes anything.
Dude. Super informative, right to the point, highly detailed with everything I needed to know. No click baity thumbnails or ridiculous pointless showmanship/ bloat content. Fantastic video sir
Nice work on this video, I did purchase this case. It's not going to be used for gaming but my build will be Asus prime x670e, Ryzen 9 7900x with the ARCTIC Liquid Freezer III 280, 32 gigs of Gskill ddr5 memory. I haven't invested since 2016 so I thought it was time to get up to speed with something new. Cables are cables the way I look at it and once dealt with they are good properly managed. I looked at allot of cases and this one stood out for the panoramic's with thin framing. I do also like the more cubed design over the standard mid-tower. As far as cable management goes something they should add would be the grommets that others have and are missing on this version of the case. I do also like the fact that this case does not have a PSU floor vacuum cleaner that most employ. This one won't be on the floor but less dust bunny's at the PSU air intake the better. Considering what others are charging for something similar, it's a good deal. Price was 109.00 3.26.2024 129.00 with a 20.00 off coupon on Amazon. Just some thoughts on the subject.
thank you so much! I've been looking at this case for my mid-tier beginner's build, and I think I'm going to go ahead and grab one. Honestly, I like the stock fans more than I thought I would (smooth RGB), but time will tell once I actually receive the case. I already have a 3-pack of Corsair fans, and I might grab another 3-pack in the future.
Ill be buying this case soon for a Ryzen 7600x / RTX 4070 super build. Love the looks of it. And the higher cpu temps don't bother me as I will be getting a big 3 fan AIO, and Ryzen 7600x runs fairly cool anyway. Thanks for the vid.
I agree with your opinion that it is a great-looking case! I have my own white-build (Lian-Li case) and really enjoy how it turned out. This case, with the glass on both front and side, make a eye pleasing case!
Again, appreciate your layman's opinions on what kind of cooling is most suitable for a case like this!
👍
I think it's a good case given the cost, it has usb 3.0 and type C 3.2 ports, an rgb fans hub, support for 200mm power supply... just replace the fans and you will see that the CPU temps will be better!! ... tomorrow it arrives and in addition to a costum loop with 2 rad 360mm I will put all Noctua 12x25 ... I'm sure it will be a great surprise given the ridiculous cost
I have an air cooler for my overclocked 5600x and the highest temps I've seen is 58C. This case is great. My GPU temps have dropped by 3 degrees! How has the case been for you?
Perfect, I have a 7950x and a 4080 with dual 360... Perfect airflow (I use Noctua fans).. I found a small vibration in the back panel, which was repaired by applying electrical tape to the inner rails. For what it costs it's very good @@msquirrel1
nice review video, i want buy this case too.
hiya, do you reckon this case in terms of temperature pefroms worse due to the stocks fans it comes with and would peform much better if i installed better fans and more fans? and if so by how much?
great video , very informative
Why is every fan pushing out the air?
Hi. Thanks for the great review, and for actually showing the backside inside of the case, unlike other reviewers.
I'm really interested in this case, however I have a modular Corsair RM1200x Shift PSU that has the cables coming out the side, rather than the front of the unit - looking at your photo after the PSU is installed it doesn't look like there would be much room for any cables in that setup; is that HDD bay above where you put the PSU removable, or even possibly relocatable?
I would like to take that bay out, and either move it - or leave it out assuming there would be room for 3 HDD's and a few SSD's stacked on the bottom.
By any chance do you know how to change the rgb on the fans
Thank you for your video !!! Already bought this few weeks ago,
So I use AIO for CPU temp problem like your recommendation and changed all free Case Fan with Arctic P12 !!
Works amazing !!
PS : C3T500 Free stock case fan is quite bad like you said.
Hi, what option would you recommend for a regular Jonsbo D30, ¿ tl-c12pro or tl-b12 non extrem version? The case has mesh on the bottom and top. I would also like to use them in the future to upgrade to Liquida Custom.
thanks for videos!
If you're wanting to do custom water cooling I would think the TL B 12 would be the way to go.
I am between this and the musetex y6 but I want to buy an air cooler deepcool ak 620 + 9 fans (TL-S12), do you think this configuration is bad for cases like this? I'm using a 7600x with 7800xt gpu, Thank you in advance! Great video 💪🏻
I've not tested the TL-S12's, but I believe they with preform much better than these stock fans. as for the AK 620 it will work, but not ideally. this case is meant / designed to have a liquid cooler for the CPU.
@@HardwareForGamers Thank you! I appreciate your time 💯
Is there a vertical installation of the gpu?
@@SSvastonLand not that I know of.
Nice review looks cool
Can you make a video of best radiator fans?
Thank you, and I will be soon.
Thank you😊😊
I watched your review of aio cooler and fans' It's very professional! Great
Those temps are crazy man. I'll stick to Montech king 95 pro.
Thai case include the argb controller?
its built into the hub.
Hi Love the video very help full i can u help me with the gaming parts please i have never build one before
What are you looking for. Do you have anything parts or budget in mind?
I can’t set the argb hub in aura sync can someone help me?
Do you know a good white power supply for this case?
I like the Corsair RM series which comes in white but only @ 750w and 850w amzn.to/3RIOY1V
silverstone as a new PSU that comes in white the DA750R Gold amzn.to/41IiHNe
Hope that helps.
what best configuration at this case if use all 9 fan? thanks...
Bottom and front set to Intake and back n top set to exhaust would prob be the best :)
Its possible to install vertical gpu support?
stock, no. You my be able to mod it to mount vertically.
Is it prebilt
I have this case but only 2 fan rgbs change when I press the rgb button on the top I have looked at the fan hub and nothing looks loose or not plugged in and I don’t know what to do
just making sure I understand, the LEDs in the other fans are on but they wont change? or are the LEDs of the other fans just not working?
@@HardwareForGamers they are on but just won’t change when I press the led button
@@Bash564 🤔... That's a weird one. I would try unplugging everything from the hub, so all of the fans plus the little connectors on the back of the hub. Then plug everything back in.
If that doesn't work there's something likely wrong with the hub.
Do you have it plugged into your motherboard? Because you could try switching it over to the motherboards RGB software to see if that fixes anything.
@@HardwareForGamers thanks for the reply o appreciate it I will try unplugging everything and I will see if it works
@@Bash564how did it go?
So we get 3 normal fan & 3 reverse fan?
Yes
The bottom ones ares normal or reverse?
@@FloridaInvestor the bottom fans have a reversed blade design.
@@HardwareForGamers how do you connect the fans to the hub?
@@FloridaInvestor All the fans are 4 pin PWM fans, so the same as all the other fans.
cable managments lvl 0
Magnets?
The fan was free right?
6 fans came with the case
@@HardwareForGamers ok thanks man
👍👍