That one's rather interesting. Makes me wonder if we see APC's take on Dead End, Wildrider and Chromedome, since at this point nothing really stops them from doing their versions of Jacky's mold-mates
The only thing that concerns me is swapping out the heads with the clear plastic ball joint. Clear plastic has a potential to break, so if the socket is too tight I could see that neck peg snapping.
Even as someone that owns the original I'd pick this one up in a heartbeat. I sincerely hope they consider doing Wildrider and DeadEnd(maybe even in more deadend-y colors)
Wow, I sure do love that my new figure sends me to a review video with a 2 minute transformation section instead of spending a few cents to just print out paper instructions...
Maybe it's just me,but it's easier to watch the transformation in real life and replicate it,than trying to figure it out from a small,2D piece of paper
@@alberteinstein453 I prefer to have paper instructions as backup. TH-cam loves to randomly ban channels for no reason. If this channel disappears or this video gets taken down, the instructions go with it. I don't like that. Also, pressing pause/play/rewind constantly at half speed while first learning a figure is annoying. If this is the only set of instructions for the figure, at least do it properly instead of rushing through it in 2 minutes.
@@BlakJak206 i get what you mean,but in this case,the mold of this figure is 10+ years old,so there are numerous other reviews with transformations step by step out there. Again,I get your point,but just saying
@@alberteinstein453 Then why not link to those? Or a link to the old paper instructions? Why link to this video specifically? Not everyone that buys this figure will know that it is an older mold, so to have the only instructions be a QR code to a short video is annoying. How much is this guy paying these 3rd party companies to have his videos linked on their products?
Wow, con un estilo de Transformación de Wheeljack de Transformer Prime, hasta deberían de aplicarlo lo mismo al personaje: Bumblebee de Transformers Robots in Disguise 2015. Muchas gracias.
Well it has a bicep swivel the original did not have, it has gap fillers in all the waffled areas. It has front fold out panel fillers. Better light piping, articulated fingers, and ankle tilt and I could go on..... So I think they added quite a few changes other then those faces.
He was in a 2-pack with a Vehicon on Hasbro Pulse for a while but it's sold out. These guys probably plan to make him though since they did drop the Vehicon not long ago.
Get your here:showzstore.com/gear-factory-wander-warrior-wheeljack_p5828.html
Nice review hugs from Portugal 😊
Ok thx @Mangmotion
That’s not wheeljack…
.. THATS GOOD OL’ JACKIE!
Oh hell yeah
That one's rather interesting. Makes me wonder if we see APC's take on Dead End, Wildrider and Chromedome, since at this point nothing really stops them from doing their versions of Jacky's mold-mates
I just got him in the mail today and he's so spectacular! Im happy to finally have Prime Wheeljack in my collection ^^
Nice job on this! It really shows how good that figure already was that they basically added a bicep swivel to it.
Now, I really hope they keep this going, giving us all the characters in the show.
Good lord...they put a lot more into this guy than I initially thought. 😱😍
What a significant and needed improvement over the original. Man, this thing is perfect. Exceptional Wheeljack figure!
The only thing that concerns me is swapping out the heads with the clear plastic ball joint. Clear plastic has a potential to break, so if the socket is too tight I could see that neck peg snapping.
Just got mine yesterday, taking the ball joint out is super easy. Nothing to worry about
Even as someone that owns the original I'd pick this one up in a heartbeat.
I sincerely hope they consider doing Wildrider and DeadEnd(maybe even in more deadend-y colors)
Es un molde de verdad asombroso y tiene una excelente ingeniería con muy buenos detalles, saludos 👏🏻💪🏻🙂👍🏻🇦🇷
That old wheeljack is so yellow now LOL
A very good Stratos (by Lancia) concept..! Beautiful line .
Regards..
Is Gear Factory also APC Toys??? Please answer.
This is so confusing. These companies need better identities.
Yes,only changes the name
@@Mangmotion ok thank you
Ohhhh my God the picture is cool! Also I like the sword of weeljacks
Thank you
This look clean. Dang. I pre-order him yesterday
Really hope they make Bumblebee using the first edition mold. Maybe even Rachet,adding more paint abs and making him a little tallier
Wheel jack is a cool autobot
Car mode reminds me of the Mach 5.
Wow, I sure do love that my new figure sends me to a review video with a 2 minute transformation section instead of spending a few cents to just print out paper instructions...
Maybe it's just me,but it's easier to watch the transformation in real life and replicate it,than trying to figure it out from a small,2D piece of paper
@@alberteinstein453 I prefer to have paper instructions as backup. TH-cam loves to randomly ban channels for no reason. If this channel disappears or this video gets taken down, the instructions go with it. I don't like that. Also, pressing pause/play/rewind constantly at half speed while first learning a figure is annoying. If this is the only set of instructions for the figure, at least do it properly instead of rushing through it in 2 minutes.
@@BlakJak206 i get what you mean,but in this case,the mold of this figure is 10+ years old,so there are numerous other reviews with transformations step by step out there. Again,I get your point,but just saying
@@alberteinstein453 Then why not link to those? Or a link to the old paper instructions? Why link to this video specifically? Not everyone that buys this figure will know that it is an older mold, so to have the only instructions be a QR code to a short video is annoying. How much is this guy paying these 3rd party companies to have his videos linked on their products?
Now Transformers animated PLEAAAAAASE i need a shockwave animated and a oversize grimlock 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
How much is he gonna be because I'm willing to pay for this amazing guy! That's good ol' Jackie! Yes yes yes!
I'd say no more than $40 if not less.
Very cool Transformers
Fantastic video and figure 👍👍👍😎😎😎
今放送中のアニメ版
i hope that they will release a bumblebee!
Wow, con un estilo de Transformación de Wheeljack de Transformer Prime, hasta deberían de aplicarlo lo mismo al personaje: Bumblebee de Transformers Robots in Disguise 2015.
Muchas gracias.
Simply awesome! 😍
Where did APC toys announce they were planning to change names? I see reference to it everywhere, just nothing official from them
Finally a good wheel jack 🤧🤧🤧
Wow, totally getting one myself. Any possible leaks on who could be next?
Is this still work of Apc toys?
Yes
@Mangmotion thanks, so the company has changed its name 😮
I think they could make some extra parts to cover the back of the car.
Smooth
Very cool video mangmotion
This could easily be retooled and redeco'd into IDW Drift!
i need the chromedome version
So exactly the same figure... but with a smirk Instead of a battle mask?
It have both
Not at all
Well it has a bicep swivel the original did not have, it has gap fillers in all the waffled areas. It has front fold out panel fillers. Better light piping, articulated fingers, and ankle tilt and I could go on..... So I think they added quite a few changes other then those faces.
I hope they make Breakdown,never have a chance to get it.
He was in a 2-pack with a Vehicon on Hasbro Pulse for a while but it's sold out. These guys probably plan to make him though since they did drop the Vehicon not long ago.
*COOL!* I love this version of Wheeljack! 🤍❤💚
I like it ☺️❤🤖🫶🏽
Hey do you know if APC is going to make a TF Prime Bulkhead??
❤❤❤❤❤👍🏻
Lindo
😍😍😍😍😍😍😍🥰🥰🥰🥰🥰🥰🥰😘😘😘😘😘😘
他家这是要把这个系列都K一遍嘛···