I have been using the same size bandsaw from a different brand (Güde) and it makes my life much easyer. The variation of teeth pitch of the blade reduces vibration an noise.
Congrats on your retirement! I hope you like the band saw. I think my favorite part is how quiet it is vs an abrasive chop saw. Let us know how it goes!
I have 2 Metal cutting bandsaws...one is a Mitering Bandsaw..it cuts 45 degree by sliding the base.... the other one is a standard horizontal bandsaw .. i haven't bought a Metal Miter saw yet... still use the Abrasive ones have a Ridgid 14" and a small 7 " version too... yeah they are noisy and dusty and less accurate sometimes .. I use a Metal cutting grease ..comes in a grease tube and solid at room temp...works great on Ferrous and Non Ferrous metals... they are sold at Supply stores for Metal or Fastener hardware... messy but less than a liquid also great for tapping or drilling use... had my saws for about 40 years now.... I like horizontal bandsaws..they are slow but cut great if you set up your cuts properly...been using them for 50 plus years... Bi-metal blades are a great upgrade... 🇨🇦🤓🤟
Hey, that is cool! I have never heard of metal cutting grease. Is it something like this? amzn.to/4dlyNBL Do you just turn the saw on then rub it on the blade before cutting?
The first things to check would be looking at all of the various roller wheels/wear points to see if there is any obvious wear or bad bearings. Also check to see if the blade is riding properly on the main wheels and within the roller guides. If all of the cuts are off, the machine may not be square. On mine, I didn't see much for adjustability in the hinge, but if there are any bolt on points at the hinge, maybe they can be adjusted some on yours. I did some poking around online and found this guide that shows some things to check on the smaller 4x6 band saws: wiki.hsbne.org/_media/tools/4x6bandsawadjust.pdf Let us know what you find out in case anybody else is experiencing this also!
The building was built by Farm and Home Structures fhstructures.com/ I have a bunch of posts about the build process on my blog. I finished the inside out myself. www.diymetalfabrication.com/category/shop-tours/30x48-pole-barn-shop-build/
Old video but I have a few tips for you if you’re still monitoring these comments? Edit to add: I have this same saw that I’ve used for the last 15+ years
I am definitely interested! Feel free to drop them here or hit the contact form on my site www.diymetalfabrication.com My main issue right now is the blade drive wheel keeps walking off the shaft. I tried tightening the Allen screw and even dimpling the shaft a bit but it keeps walking off and if I don't catch it early enough, the blade falls out of the guides. Not sure if you have had that happen before.
I cut mostly 1” to 2” tube round and square. Also 1/8” - 3/16” plate in the vertical position on a 12x12 table I made for it. I don’t use the water cooler at all. I used to, back when I was doing some production stuff where I was cutting 1.5” x .060 round tubing all day. For single cuts or just doing random cuts here and there, I run it dry. Make sure the wire wheel is good and contacting the blade to clear the chips. I use a 10/14 bi-metal variable pitch blade. Morse m42, Starret or Lenox are all good choices. The 8/12 is a little aggressive for anything under 3/16- 1/4” wall thickness. I run my saw on the second pulley setup or around 130- 2nd slowest speed. You can definitely run the down feed faster than you are. At the point in your video where you point at the blade as it’s dropping, that’s the speed you want to cut at. Unless you’re doing a single .060 tube or something really thin. Lastly, it looks like your blade isn’t sitting right in the guides? Both bearings should be covering the whole blade. Also, I can’t tell, but do you have the other bearings in the guides that sit parallel to the blade riding on the back of the blade? The guides (bearings) shouldn’t come to rest on the table surface. The leading guide on yours needs to move back so it doesn’t touch the table. If your blade was sitting in the guides right it wouldn’t be able to make a complete cut with the guide hitting the table like that. Use the little rubber bumper stop to stop the blade before it hits the table down in the groove. Hope this makes sense. It’s been a while since you made this video so I’m sure you’ve changed a few things already?
I haven’t had the issue with the wheel falling out. Try moving that guide back so it’s not hitting the table like I mentioned. That may have bent or put stress on the guide but I don’t think that would have caused the wheel to come off the shaft. The top wheel does have some adjustment. Maybe it’s off and putting stress on the drive wheel?
I have been using the same size bandsaw from a different brand (Güde) and it makes my life much easyer. The variation of teeth pitch of the blade reduces vibration an noise.
Never heard of that brand. I have been using an 8/12 TPI blade which has been pretty good.
What TPI blade have you been using?
Thanks for the demonstration. I just ordered a band saw and this is the best video I’ve found so far on general information.
Thank you for the kind words!
What will you be cutting with yours?
I will be mostly using it to cut steel stock for lathe or mill work. What I ordered isn’t that big, but I hope it will do for a retired hobbyist.
Congrats on your retirement!
I hope you like the band saw. I think my favorite part is how quiet it is vs an abrasive chop saw. Let us know how it goes!
I have 2 Metal cutting bandsaws...one is a Mitering Bandsaw..it cuts 45 degree by sliding the base.... the other one is a standard horizontal bandsaw ..
i haven't bought a Metal Miter saw yet...
still use the Abrasive ones
have a Ridgid 14" and a small 7 " version too...
yeah they are noisy and dusty and less accurate sometimes ..
I use a Metal cutting grease ..comes in a grease tube and solid at room temp...works great on Ferrous and Non Ferrous metals...
they are sold at Supply stores for Metal or Fastener hardware...
messy but less than a liquid
also great for tapping or drilling use...
had my saws for about 40 years now....
I like horizontal bandsaws..they are slow but cut great if you set up your cuts properly...been using them for 50 plus years...
Bi-metal blades are a great upgrade...
🇨🇦🤓🤟
Hey, that is cool! I have never heard of metal cutting grease. Is it something like this? amzn.to/4dlyNBL
Do you just turn the saw on then rub it on the blade before cutting?
Do you know why the saw comes down chucked, mine shifts a significant amount. Mine is the smaller one with the 1/2 blade.
The first things to check would be looking at all of the various roller wheels/wear points to see if there is any obvious wear or bad bearings. Also check to see if the blade is riding properly on the main wheels and within the roller guides. If all of the cuts are off, the machine may not be square. On mine, I didn't see much for adjustability in the hinge, but if there are any bolt on points at the hinge, maybe they can be adjusted some on yours.
I did some poking around online and found this guide that shows some things to check on the smaller 4x6 band saws: wiki.hsbne.org/_media/tools/4x6bandsawadjust.pdf
Let us know what you find out in case anybody else is experiencing this also!
great video thanks.
Glad you liked it!
Got any questions or other things you are curious about?
👍👍👍👍
Dude where did you buy your work shop from?
The building was built by Farm and Home Structures fhstructures.com/
I have a bunch of posts about the build process on my blog. I finished the inside out myself. www.diymetalfabrication.com/category/shop-tours/30x48-pole-barn-shop-build/
Old video but I have a few tips for you if you’re still monitoring these comments? Edit to add: I have this same saw that I’ve used for the last 15+ years
I am definitely interested! Feel free to drop them here or hit the contact form on my site www.diymetalfabrication.com
My main issue right now is the blade drive wheel keeps walking off the shaft. I tried tightening the Allen screw and even dimpling the shaft a bit but it keeps walking off and if I don't catch it early enough, the blade falls out of the guides. Not sure if you have had that happen before.
I cut mostly 1” to 2” tube round and square. Also 1/8” - 3/16” plate in the vertical position on a 12x12 table I made for it. I don’t use the water cooler at all. I used to, back when I was doing some production stuff where I was cutting 1.5” x .060 round tubing all day. For single cuts or just doing random cuts here and there, I run it dry. Make sure the wire wheel is good and contacting the blade to clear the chips. I use a 10/14 bi-metal variable pitch blade. Morse m42, Starret or Lenox are all good choices. The 8/12 is a little aggressive for anything under 3/16- 1/4” wall thickness. I run my saw on the second pulley setup or around 130- 2nd slowest speed. You can definitely run the down feed faster than you are. At the point in your video where you point at the blade as it’s dropping, that’s the speed you want to cut at. Unless you’re doing a single .060 tube or something really thin. Lastly, it looks like your blade isn’t sitting right in the guides? Both bearings should be covering the whole blade. Also, I can’t tell, but do you have the other bearings in the guides that sit parallel to the blade riding on the back of the blade? The guides (bearings) shouldn’t come to rest on the table surface. The leading guide on yours needs to move back so it doesn’t touch the table. If your blade was sitting in the guides right it wouldn’t be able to make a complete cut with the guide hitting the table like that. Use the little rubber bumper stop to stop the blade before it hits the table down in the groove. Hope this makes sense. It’s been a while since you made this video so I’m sure you’ve changed a few things already?
I haven’t had the issue with the wheel falling out. Try moving that guide back so it’s not hitting the table like I mentioned. That may have bent or put stress on the guide but I don’t think that would have caused the wheel to come off the shaft. The top wheel does have some adjustment. Maybe it’s off and putting stress on the drive wheel?