BATHROOM REMODEL COMPLETE from START TO FINISH (Amazing Result)
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- BATHROOM REMODEL COMPLETE from START TO FINISH (Amazing Result)
The complete start to finish video on this bathroom remodel and renovation..... The one with the tiles issue!!!!
This bathroom was a great transformation including removing the old ceiling, floor, walls etc etc to make it a lot better and a lot more room.
The Calypso Shorewood bathroom suite is superb, really really nice and works so well with the tiles that finally arrived...👍🏼👍🏼
Suite by Calypso Bathrooms
www.calypsobathrooms.co.uk
Drills used including the brilliant M12 SDS
@MilwaukeeTool
uk.milwaukeeto...
Clean down with BigWipes
bigwipes.com/
Superb concealed cistern by Roper Rhodes
www.roperrhode...
Trainers by @Reebok
Shout out to-
@Screwfix
www.plumbase.c...
Plumbing day to day from leaks to bathroom installs, dripping taps to radiator power flushes and fault finding
Subscribe and hit the like button....
Also follow me on Instagram at @mjtiff_plumbingandheating
#plumbing #plumber #bathroomrenovation #bathroom
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
Amazing finish, perfect Sunday night watch....
I diy’d my bathroom to an average standard and can really appreciate the expertise it took to get that standard of finish.. Class. Props to the customer for understanding the tiling issue wasn’t any fault of yours ....
Thanks mate... appreciate that. Yes the customer was very understanding....
Takes confidence to give it a go. To do as much yourself.
Hey mate first time viewer, just wanted to mention if you haven't thought of it but fit the taps and tails while the bath is off then just connect up once the bath is in, saved doing it all from under side of bath
Thanks for watching buddy, and welcome to the channel 👍🏼👍🏼
That’s exactly how I do it mate…. 😉
@@MJTiffPlumbing Awesome. Couple of questions mate, first off what's your preferred [personally] adhesive to use to fix down a shower tray? S&C, CT1, tile adhesive, etc, etc
Secondly, customer has mega build up of black sludge-like mould above water level in concealed cistern and constantly in the tip of shower head and taps, even after having a new bathroom installed (years ago) I thought it might be a combination of normal build up from not wiping down properly but the contained cistern in a vanity unit has MEGA build up, so perhaps lack of an extractor in the bathroom? What you think
Brilliant video. Starting a plumbing course today so this is really inspiring. Just at the start of my journey. Thanks for making this video.
Thanks buddy…. Hope the course goes well for you
I actually watched every second of this video sitting in my bathtub thinking “I need this bloke over to do my bloody bathroom”. Nice work mate.
Hahahaa….. thanks🙌🏼🙌🏼
Really good and informative videos and surprisingly relaxing! I like how you’ve done the silicone bead around the tray and then you do it again after putting the tiles down. Is this called tanking in the industry?
Thanks mate…. Kind words
This guys one of the most informative and skilled on TH-cam if not the best I love his videos learn so much thankyou
Very kind words mate….. thankyou very much
Looks good,,
Why didn't you replace flooring under shower area & where is the waterproofing membrane?
Hi Mark, can I ask if you use regular plasterboard or moisture board in your bathroom renos? I’m seeing conflicting info online - lots of people using a moisture barrier and some not. Not sure which way to go!
Moisture board and then tank the walls👍🏼👍🏼
Thanks for the heads up on the torrent Ciston
Looks well made and well thought out
👍🏼👍🏼
Not sure why the area under the bathtub is the one that is ALWAYS gets forgotten when it comes to tiling and making everything WATERPROOF! blessed DITRA MAT!
ABSOLUTELY FANTASTIC WELL DONE LOVELY JOB😀what workmanship you deserve a medal
Thankyou mate….. kind words 🙏🏼
how much you whack her mate @@MJTiffPlumbing
Hi Andy, I've got one of these, does the job gor what i need...the bar isnt for cord storage, the little bumpers are so you can use the handle from the other side, you have it upside down...tirn it over and you'll see what i mean 👍
Thanks Steve 👍🏼
You made this installation look easy but well done mate! This looks grand. Quick question, the tiles on the floor, did you have to put something on top of the sub flooring to lay the tiles? If so which material
That’s buddy…It will of had hardie backer cerment board on before the tiling..
Hi there, can I use a 50mm pipe with an Admittance valve to vent my 110mm soil pipe instead of using a 110mm valve. By the way, love your videos
Yer should work fine mate
Absolutely a perfect job. Really nice!
Thanks buddy
Looks bang on needs resealing everywhere proper rough . Finishing touches are the most important. Good work though. Few things I'd do slightly differently but each to there own. Overall very good mate
We had the same problem, the floor was all rotted through in our bathroom near the sink and the joists were gone too. The plumber fitted a new floor and joists with an extra cost but he didn't use waterproof plasterboard on the shower compartment like he said he would. I notice you used waterproof board where water is being used, nice touch.
Always good practice…..
@@MJTiffPlumbing I asked him why he didn’t fit it and he said it was too expensive lol.
Torrent are super easy to work with, deffo need that batten behind though.
CT1 is life.
Class job. The run of units and all in one worktop is next level
Thanks mate..... yer the top and sink is so nice..... 👍🏼👍🏼
I must admit once I swapped over to liquid PTFE I’ve never used Tape again, Flomasta Blue is best imo.
CT1 is life!
Thanks for showing this, fantastic job and great inspiration!
Thanks James 👍🏼👍🏼… glad you liked it
Just happened to find this video in my recommendations you have done a fantastic job on this bathroom, the finished work you can see of a higher standard and quality in your work, just by looking at the clean lines of how this bathroom has turned out, well done 👏 even if this video is a year old...
Thanks very much…. Kinds words
Hi there, with using tiles for the shower area, would you not advise tanking the area. thanks.
I’ve tanked showers and I’ve not tanked showers and never had one issue….. it’s it’s sealed round the tray and tiles right it will be fine
Hi Mark nice video, why you drill into the tiles to fix the shower door when you bonded The shower door to the tiles, there was only 10-20mm max each side.. not enough to take the middle out and install correctly. Hmm wrong size of door or the chippies and tiler made the space to small..!!
Always screw a screen to the wall…. You would never just silicone and leave it mate.
Not sure what you mean by the rest of the comment…. Screens are designed to have a min and max alteration to fit various sizes….
@@MJTiffPlumbing watch the video back when you put in the screen,you walked backwards into the shower with the screen, didn't look like you screwed in the sides, .. I am not hiving a dig just a notification. I have to disagree if you bond it correctly there is no chance of it coming of ideally you would also screw it.. Great work all the same.. 👍
Looks like a first class job. I’ll be attempting my own soon. Great video, thank you.
Thanks Neil 🙌🏼🙌🏼
Awesome bathroom.... Nice bit space for a mirror as well on top the basin area. No extractor fan? One hell of towel radiator it's massive.
Thanks mate
Extractor and lights went in the day after filming the end shots.....
Client wanted a high towel rail and it works great in the room👌🏼👌🏼
Spot on bud, great video bet the customer was buzzing
Thanks mate, yer she loves it
At 39.03 you show the isolator for the cistern at the bottom of the cabinet. The back board behind the pan would be fixed in so it would be very difficult to reach right down through the removable front board to switch off the water!! I always bring the cold feed up so the isolator can be accessed easily especially for the customer who might need to do that when you are not available. Bathroom looks superb.
Thanks buddy…. It can be accessed but I know what you mean👍🏼👍🏼
@@MJTiffPlumbing Cheers!
Wow!! What a transformation. That’s a spot on job Mark. Definitely one to be proud of. Not surprised customer was over the moon. 👍
Thanks Phil..... yer she can’t believe how much of a difference it is
Love your vids, makes me proud to be a plumber seeing vids like these top man 👍👍
Wow...... very kind words James, Thankyou pal 🙌🏼🙌🏼
I just found your channel, is really nice.
Just wanted to say, I have the same Makita radio for 9 years 😄 they are really good. Greetings from Mexico 🇲🇽✌️
Thanks buddy….. glad you are enjoying the content👍🏼
Gap between bath and vanity looks difficult to access if things fall down or it needs a clean?
Thanks for watching 👍🏼👍🏼
Im doing my brothers bathroom soon, thanks for the tips.
👍🏼👍🏼
Class installation. 👏 Would have liked to seen the tiler at work as well. Interested to see a video sometime on how you price these types of jobs, level of contingency added in in case of unforeseen problems, i.e. knackered floor. Really enjoyed watching this. Keep it going. 👍
Thanks mate..... I was chasing my tail on another job when the tiler was on this one so could’ve get any content.
The issue with the floor was an extra as it wasn’t known about..... however due to the mess up with the tiles I didn’t charge her for redoing the floors.
Good will gestures go along way I’ve found 😉
Can you tell me what colour where the tiles, thought grey at first, but wasn't too sure if they where beige?
What would you do if the floor passes under the stud walling, when you need to replace it? Or should the partition wall usually be sitting on the joists? Cheers.
Get the multitool out😉
@@MJTiffPlumbing I don’t suppose you have done a video on how to fit a level access shower former onto “I joists” ? There’s nothing to screw battens onto to drop the floor. I was told there were clips you can buy but can’t find them anywhere.
I moved in to my house 25 years ago plaster boarded the whole bathroom tiled and fitted bath and shower cubicle just taken out for revamp no damp still spot on not all about materials just doing the job right
Brilliant. Best plumbing videos on TH-cam. A job well done 👌
Wow, thanks mate.... appreciate that
Work of art, beautiful!
Thankyou mate
good job mate and a good advertisement for you business!
Thanks Brother......... 👍🏼👍🏼🙌🏼🙌🏼
@@MJTiffPlumbing love the branded mats and signs , super job.
What a transformation mark was wort waiting for thoes tiles happy Sunday.
Thanks mate.... yer the customer deffo wanted to wait for them... they looks spot on👌🏼👌🏼
Great job, lovely finish! Thats a big a$$ radiator though, probably overkill for the size of the bathroom, what do you think?
They don’t give out much heat and the customer wanted it for the style and look… can always turn them down😉
Mate, a proper inspiration. Just had the balls to go on my own. I’ll be asking for advice every day 😂😂 thanks for the content. 👍👍👍
How do you finish you silicone. I’m using the profiles. Is there a better way?
Wish you all the best with your business mate…. If I can help I will.
I use the silicone tools from Screwfix mate, they are spot on
I got the wooden bath panels but I have x2 babies with additional needs and they have splashed so much water it’s practically dissolving and rotting away! I don’t know what to do now
What grout do you use? I recently had my bathroom done and grout is cracking just around door frame rest appears fine
Think my tiler uses Mapei
Your van reg makes me chuckle every time xD
Hahaa…. Thanks mate
Great transformation
Did the shower area get tanked before tiled ? As green plasterboard isn’t really suitable for high moisture areas and I have seen in turn to mush , I believe it’s suitable for long moisture areas like behind sink basins etc
Yep all tanked in…. That’s what the tiler does
Very nice job Sir.
Few questions.
What did you bed the shower tray down with?
For the bath, do you put silicone on the sides of the bath that butt against the wall?
How long did this job take you apart from the time it took for waiting on the tiles?
You mentioned you got a tiler to tile, do you also tile yourself?
I like to fit radiator service valves from toolstation when I install towel rads cos it gives you a shut off point and there not expensive
Smashed it mate. Great video! Wish you all the best
Thanks buddy
Just found your channel .first class nice job very high standard of work no wonder your client is chuffed
Thanks mate.... glad you liked it and welcome to the channel..👍🏼👍🏼
Again Fab upload, very helpful.
Thanks mate
Masses of work that I previously thought would be done in two days .
Real eye-opener . Calm approach and well explained . Great job and would have appreciated some idea of costs ; ball park figure even . Lovely finish everywhere , thanks.
2 days work!!!!!!!...... hahahaaaa.... no way!!!!
Thanks and glad you enjoyed it, as for prices/cost etc that’s between myself and the customer, not the done thing to say what things cost on something like this imho.
Looked great when completed and the customer was over the moon
I am intrigued why you didn't put the bottom brackets of the towel rail at the bottom - you put them so high wouldn't they be in the way of the towel?? Re ptfe tape V liquid I had 6 rads to fit so chickened out of using liquid and did them all with ptfe tape because it has always worked for me and can be easily undone!! 1972 was the copper shortage and the only copper pipes were thin walled so couldn't be bent!!
No as they were at the side of the rails
Absolutely brilliant job
Hi great video, just wondering what you put on top of the floorboards before tiling and whether it glued to the floorboards? Thanks
My tiler will put cement board or hardie backer boards before tiling👍🏼👍🏼
hi Mark .. great watch as usual . just a comment on those roxy .low level shower trays . a few yrs back me mate fitted one of those and a few weeks after fitting ant tiling he got a call out the tray was leaking down tru celing . so post hast he headed down there and first thing done tested the waste out let .and it was good . water getting out no prob . so hees kneeling there baffled and after a while the mom .on site came up stairs with a cuppa .and asked how he was getting on .and he told her that he was a little non plussed . so she tells him that when the leak occured it was after he youngest son who was then about nine had a shower and he had a habit of stantding with his heel on the shower out let . ohh la la yep the water filled the low level tray real quick and water flowed out under the shower door . no overflow on a showr . lol . problem solved . anyway i neve understand why people go the expense of fitting a great shower and then also fit a roxy bath . no sense in that . why like to lol back and soak for hours . get in get showered and get to uck out i say .ll
Lovely...
Well done ,,,your the man!!!!
Thanks buddy
Nice job mate👌👍👍 I’ve always used ptfe tape on rads for years now and never had a problem with it🤷♂️
Thanks mate.....yer ive never had an issue with PTFE tape
Thank you for the awesome Content buddy. Hope you have a good week
Thanks, you too!
Another great video thankyou
Next time you fit a bath can you do some footage on how you fit the waste? Like whats best method so dont get no leaks .etc Thanks again mate
Thanks mate.... will do 👍🏼👍🏼
Whag did you replace the rotten flooring with? Is a waterproof kind of board or just MDF
The flooring was MDF 👍🏼
@@MJTiffPlumbing thanks for the reply, what kind of under flooring would you recommend using to prevent rotting/damp from leaked etc ?
fair play turned out very well mate
Thanks buddy
will the one piece countertop make it a hassle to service the cistern?
No the front comes off👍🏼👍🏼
Been looking forward to this one 👍
Thanks Nick....hope you enjoy it buddy
Fixtures, fittings cost of your time and everything else I might of missed....what’s the cost of this beautiful new bathroom? Great Video
Thanks mate...... all completely depends on what you want, what work is involved, what suite you choose etc..
Hi mate, what did you do to fill the gap between the bath and the wall before tiling? Does it need to be waterproof boards? Cheers.
Smashed it again mate. Top finish
Thanks mate...👍🏼
Another cracking job Mark👍🏻
Thanks Simon 👍🏼👍🏼
Your videos are brilliant , love your attitude , keep up the great videos as always .
Thanks mate… kind words
Is the vanity unit bespoke made to measure?
Don’t think this one was mate
Quality job !!! BUT 2 things. One usually have a mirror above sink fo shaving. Should sink and toilet be switched to allow mirror on wall ?
Can the bath panel be taken off without moving end unit
Customer didn’t want a mirror on the wall….. hence there is no mirror on the wall, customer is a female who lives alone so no need for shaving point 😉
And yes, bath panel is removable
BUT….. Thanks for watching😉
Well done lovely job nice light colored tiles lots of good tips was glued to it👍👍👍
Thanks mate, glad you liked it
Is it possible to be a bathroom fitter with just a level 2 diploma in plumbing? Not the NVQ, just the level 2 diploma. Thanks.
Cracking job again Mark with a beautiful finish to your work also i like your licence plate on the van great job take care
Thanks Glyn..... the plate gets a lot of compliments 👍🏼
Amazing install mate, 3rd year apprentice and hope my work gets to be of that high standard, new subscriber👍
Thanks buddy....glad you like it. Plenty more content to come make so keep watching and learning buddy
Great job looks brilliant , well done , looking forward to next episode of real life plumbing 👍🙂
Filming starts again tomorrow😉👍🏼
Still a newbie but love watching your vids and well impressed by this bathroom 👍👍
Thanks buddy...👍🏼👍🏼
Great thorough job
👍🏼👍🏼
Great job
How long it took to complete?
Thanks mate…. Think this was a week or so
Great work there buddy. Brilliant workmanship as always. Just shown the missus and she's just asked me why can't i make our bathroom look like that. Looks like I've got some work to do lol. Add it to the list of to do's
Hahahaaa..... brilliant... thanks mate
Top Job as per usual.... say it again, such a tidy worker 😎👍
Thankyou mate...... appreciate that, I like to keep it as tidy as possible. The customer even said that when I handed it over
Nice looking job. Little bit of advice though see if the tiler can mitre the joints on window trim makes it look a lot smarter.
Thanks mate, glad you liked it.
Fantastic finish and workmanship.
Thanks mate, appreciate that👌🏼
proper job that mate well done looks awesome.
Thanks buddy
Wicked job! Been working with my dads friend learning kitchen an bathroom fitting for just under two years now, love to learn as much as I can, seeing how different people work in different situations, think I’m picking it all up pretty well and loving learning! Hopefully be fitting bathrooms on my own one day soon👍🏻 will defo be subscribing and watching you much more often
Thanks buddy... glad you enjoyed it
Do you not use adhesive tape around the shower tray ? I don't know anyone who ever fits a tray without it , moves with the tray . Silicone will only last a while
There’s many different ways to fit trays, I have used the sealing kits, I’ve also just used silicone and tanking etc…. And in 26years of fitting bathrooms etc ive never ever had an issue…
If you watch some of the other bathroom installs you will see it being used👍🏼
Good tidy job!!
Thanks mate
Love watching your videos you are very good and professional in what you do, anne
Thanks so much Anne 🙏🏼
I love your videos mate keep them coming ❤ although please use some safety glasses bud when knocking out tiles. 🤓 I had a mate who lost an eye.
Thanks buddy👍🏼👍🏼
Lovely work mate
Thanks buddy
Literally addicted to your videos now, plus you don’t look old enough to have been doing it for 27 years!?
Thankyou mate....... and thanks for the compliment...... wait till i tell you i am a grandad of 3 aswell........
😳
@@stuntmanwill hahahaaaa...... told you
@@MJTiffPlumbing Don't have to worry about my old tin bath going through the floor, it sits on a concrete floor in one of the outbuildings, bit of a pain filling it with buckets of hot water though, cold in the winter too!!!!!!!!!
I thought he was about 30
Another nice job Mark, keep up the great work. And keep the videos. coming 👍👍👏
Thanks mate... appreciate that comment buddy 👍🏼👍🏼
Very nice job Mark, I must admit it’s a nice feeling to see a job like that finished, doing my own in a couple of weeks, not looking forward to the disruption.
Thanks Peter..... hope yours goes well 👍🏼👍🏼
Love it, great job and well done for making another customer happy.
Thanks buddy
I’ve got a load of stainless steel pipe to cut out of a kitchen I’m installing tomorrow as we’ve ripped the old kitchen out and never seen so many compression fittings put in as they’ve had constant leaks. Can I use my normal pipe slice to cut it or is it an angle grinder/hacksaw job?
You can use a slice but it will batter the wheel...... Tough stuff
@@MJTiffPlumbing sound. I might just use the angle grinder and a file. I’d rip the whole lot out but the whole house is done in it and I’m only down to do the kitchen so I want to rip it out as it’s me who is guaranteeing the work.
I see the sink has an s trap, do you guys not individually vent fixtures in the uk or something?
Just seen your van number plate... nailed it! Great video!
Thanks Phillip..😉👍🏼
Great job thanks for video excellent as always 👍
Thankyou mate 👍🏼
hi there, how much did it cost for this project including your fee and materials, please give details as I will like you to do my separate bathroom and toilet next year in Leicester if you are willing to travel there and do you do other renovation projects around the house, thanks
Thanks however I wouldn’t travel that far out of my area for work, sorry.
Plenty of other good plumbers about in your area👍🏼👍🏼
Perfect Vanity plate!😀
What you mean??
@@MJTiffPlumbing On your van T011LCT with a cheeky dot in the C.
Oohhh…… yer 😉😉
I’ve got a few😉