Pelican HyDrive Hacks
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Here are some tips to help make the pedal drive work smoother and quieter on your Pelican kayak.
--
Follow me on:
Facebook - / lovekayak.fishing
To check out Pelican International product here:
WORLDWIDE Site - www.pelicanspo...
CANADA Site - www.pelicanspo... - กีฬา
I'll probably never have one of these but was captivated by your thorough explanation of what you were doing and why.
I have the HDII drive and did some of theses mods. I didn't want to lock my pedal arms in place because I let my kids use the kayak. That being said I did loosen and lube up the cables and pivots and it made a big difference. One thing I did differently, though, was to use a single layer of Teflon adhesive tape in place of the black tape you put in the pedals. It achieved the same effect of quieting the noise, but doesn't lock the pedal in place. Plus the Teflon acts as a bit of a self lubricating surface, reducing the resistance to pedaling. Great video. I've enjoyed watching and learning from you.
Interestimg, and well-presented as usual, Marty. Keep 'em coming, Buddy...
Great video learned a lot. Just watched it twice to make sure I was doing it right. Pedals perfect. Loosened nuts and lubricated. Thank you
I’ve been a huge fan of yours for a couple of years watched you throughout the great loop and really really enjoy your fishing videos but overall Marty I think you’re a great dude and I will continue watching all of your great videos thank you very much for sharing them with the world God bless you brother
Another useful video! Love me a bit of "Marty in the workshop"! Stay safe & well. 👍👍
Loving the new (original) Marty! Your creativity in your kayak mods is what brought me to your channel in the first place. I’ll watch whatever you put out, but I’m glad to see you get back to what you enjoy.
I will be doing this to my 2 catch 130's ,that was one of the only complaints I had with these drives was the noise,thanks for the tips Marty.
Always coming up with cool ways to void my warranty!! Great to see you in the shop again!
Ohh how much we needed this video in 2014 when everyone was buying hobies.
All you hobie guys... this applies to you as well because it is gen 1 hobie drive. This weekend you know what to do!
On the pedals where you put that tape I think a better idea might be to use shrink tubing. I think it would stay put better and not become gummy overtime.
I've worked as an Electronic Tech for 40 years. I NEVER use electrical tape, don't even allow it in my Tech room. It always turns into a gooey mess and causes more problems than cures. Heat Shrink is the way to go. Also, I use don't Acetone to remove decals or stickers. Alcohol breaks down the glue without damaging the plastic parts, just let it soak in for 15 or 20 minuets. Thanks, Marty, for another Great Video!
I might try a combination of Teflon tape and heat shrink
First time watching one of your videos and idk what it is but you just seem like the most likable fella. I greatly enjoyed your video. Have a great day
A piece of fuel line hose will work well for a spacer for the fin mod.
Some of us are happiest tinkering or in nature fishing. Well done!
I always love to see what's new in your DIY mods.
I have the pelican catch 110 fishing kayak, I am so glad I saw this video. I have never really heard much noise from my pedal system but I am doing this today
Love it, I will definitely be doing this to my high drive…. They come out of the box very noisy. Friendly warning - stainless nuts on stainless bolts have a tendency to gall and seize up. A little anti seize with prevent that!
I just got one of these and this video saved my ass! Thanks zoffinger
Thanx Marty !! I was waiting for this video before putting my getaways together, no rush , we still have snow and some ice on the lake in the morning.
Great video Marty, some my want to use heat shrink, but everyone has electric tape and there is lots of uses for it, almost all of use keep in a carry pouch or Maine tool extra box anyway that we carry on the water anyway.. alot of good ideas to make good product better. Great work as always. Thanks, and 73 Earnest K5EWM.
We need more stuff like this, but yes I understand,the great loop...
never knew they made plastic razor blades-glad to see your back with your projects
good to see you back in your shop
Maybe try Teflon plumbing tape on that pedal shaft, has to be better than electrical tape.
Removing stickers and adhesive labels is much easier if you apply heat using hair dryer or heat gun first. Had someone put a nasty adhesive “do not park here” sticker on my car window, but it came off in one piece with hair dryer, easy peasy.
Yes I enjoy seeing all the Mods and the Pre Maintance you do enjoyed it Marty.
Good to see you back..doing what you enjoy..
Excellent improvements Marty, quick and easy too.
Was questioning weather to get one of these or not...Im convinced.
I like seeing your mods...always thinking how to make thing a bit better
Makes a world of difference fishing back country in skinny water when you have to make short pedal movements to move forwards
Thanks Marty! Have a good one! 👍👍👌✌️
Awesome upgrade!!
Man, i would put my kayak on your hands anytime. 👊🙂
good job Marty keep up thr good work!
Marty... I have been following you for quite a few years now. I appreciate your contribution to the florida lifestyle! I have lived here since 1985 and have been an executive for one of the worlds largest retailers. I have been an avid fisher and spearfisher and general salt water enthusiast since i first moved here. I am considering buying a home that is on the water just east of your location. I have boated up the river many times in my 26' bay/flats boat and in kayaks... I know the water can be a bit skinny through there between little harbor and your place. I intend to bring a trawler with a 40" draft... how difficult is it to navigate those waters with a boat of this size? Are you able to go ONLY during high tides? Your advice would be greatly appreciated. Maybe I'll be your neighbor soon. Thanks SK.
Marty I could see your trailer through the door of the shop. Would love to hear about your plans? Living and working at the old business? I’m glad you’re back on the tube.
Nice work Marty!
GREAT video marty. Is there anyway you could make a video on typical cleaning and maintenance for the hydryve? Mine is very very squeaky and Im fixing to take it apart but would love some info on more frequent care for the drive
Very informative vid, thanks. I am deciding between a Hobie and Pelican. Seems that there are a multitude of negative reviews on the Pelican drive. So I am surprised at the great reliability you describe with the Pelican especially with usage as a rental.
Got me scratching my head.
Great vid man
Good video!!
Just landed in Sarasota in that windy, noisy day. Now to watch the rest…
That pedal orange band being shipped so tightly is the same thing I deal with on commercial rtu’s( roof top units) the drive belts for the evaporator fan is so tight that if you don’t loosen it will stretch out so much you will get a call back with in a month for low air flow and a frozen coil. Due to the belt being stretched out. I’m sure that happens with the orange band as well.
Hey zoffinger ur a fiddler im a fiddler i like to create stuff just like you do im fascinated by your videos i see your into boats and stuff i love it so many genius concepts applied in your projects. I have this new vision to create something i think its pretty snazzy and it may come in handy for outdoorsman or survivalists im kinda handy with electronics its a simple concept for the most part theres one problem tho and i may need your wisdom to get past it.
Ya I never did like the slop and noise ….I’m going ahead with this mod. Thanks
Brilliant Marty.
Good job
Hey Marty I would think that using a marine grease of some sort might stay and not wash off so easy. Love you modifications I can see is a type of thing I would tinker with.
All kinds of nylon spacers available at Ace Hardware and online. You can cut or sand them down to a custom height
Thank you
Thank you sir
Mega LIKE!
Thanks for sharing !!!!!!
Great video!!
the heat gun on the sticker and use WD40 on the sticker residue
Any chance you can show how the rudder's small bungee is routed? I picked up a used Getaway and the line is just a tangled mess and I cannot figure out it's correct setup. Thanks! Great vids BTW!
I lubricated my hard drive too and you're right...it was very satisfying 😜😜😜
I think I'll be getting a kayak in the next few days should I get the warranty with it
Hey Marty, love your videos. I just wonder if Pelican views your videos and add or correction some of the mods you show us to be a better solution to original design ? Great work keep showing us those upgrades. 👍🏻👍🏻
I hate to say it but I can almost guarantee that that company could care less about pedals that make a little bit of noise. I feel like if they were that worried about it, they would have held tighter tolerances when they designed it. I could be totally wrong but who knows.
I don't own a kayak, thinking about it. But you like to tinker like me, but you opperate at a much higher level my friend.
This is the type of thing that should of been done in the factory where they are made 😄
You should offer kayak customization services
Have you ever had to replace orange cables on hydryve? Specifically the single one that runs over the pulley. I don’t want to have to buy a new hydryve unit. Cost!
Thanks
Joe
Great vid. I currently have a pedal prop kayak but it’s nearly 14ft and heavy. I’m thinking of going to the pelican due to lower weight and simplicity. Any hacks for the rudder, as far as deploying and retracting once sitting? Ty. Also GREAT pic on the back wall…
Any Ideas on how to replace just the orange cables?
Did you ever wrap a kayak? Can you show us how??
For the fins, how about just using a wire tie and clipping the extra off?
I had no idea they work like that
An easy way to remove stickers is to use charcoal lighter fluid.
You can upgrade the fins to Hobie Turbo fins and gain a few knots of speed out of your yak.
Best hack ever- throw away that pos Pelican and put a Hobie Mirage 180 drive in, it fits! Speaking from experience. Mine snapped 5th time I used it.
a good tip that marty touched on is, WD40 doesnt last long, in fact, it is best suited for displacing moisture or penetrating stuck bolts, however it also has chemicals and detergents in it that can actually cause more rust and corrosion over time, i see people use it on bike chains and some even spray their components with it only to find those parts rust much faster when WD40 is applied. i personally use marine grease on my bike chains, others use bar and chain oil or just simply go buy the chain/cable lube type of lube.
Anyone that isn't a woman knows this
@@noway57 im not sure id agree, my wife, mother, daughter and some other females know more about cars than some of my guy friends, she used to watch me work on our old 60s firebirds and camaros then started helping and now she can name more parts on an engine than a lot of my guy friends. she also pulled a bad trans from my old camaro while i was at work, not all women are into shoes and makeup.
I've been wondering if the HyDrive is "close enough" to the Hobie unit for amateur boat builders.
It's essentially a copy of the original mirage drive. You can use hobie mirage parts to replace things that may break or wear out. So far only issue with my hydrive is it's developed a annoying squeak after 2 years of heavy use.
@@kyleoden3015 Thanks for the update. I might try one on my next boat build.
Now you can sneak up to those BIG FISH.............................
I think the spacer could make the fin less effective and slow down the top speed. Could you check it out while you have access to both and original and a Martyfied pedal drive?
What about nylon washers
I have a squeak in my drive any recommendations on how to fix it
I've wondered if the catch 120 can be converted to pedal/fin drive
Where did you get the padded deck covering?
How do you reverse with this pedal drive?
👍
Is it a HD 1 or 2
Id drill and add some washer cable keepers
Save me so much trouble
id say the rattling of the pedal pads themselves was due to the sideways moevement of the pedal on the rod. a couple of washers would have been a just as simple fix. It would also add enough resistance to possibly keep the pad in the same position as youd want it.
My pedal drive lasted 3 fishing trips. And a plastic gear broke.
👋😎👍
Plastic razor blades take stickers off painted surfaces and let ne reuse the sticker.
It's like trying too quiet a diesel it just makes noises you get used to it and you recognize the noise as a diesel
People , please don't constantly spray petroleum lube in these parts that are going to be dunked in our waterways. Just dumb. Use veggie oil if you must.
I’m first!!