This time around, I channel Akira Nakai, but come away with all of the rough and only some of the style. Find the lip here! ⤵️ www.ebay.com/itm/MS-Style-Fro...
Your videos are great! You've got me excited again about my 2011 #2. Just ordered the front lip. Next is probably the motor mount. Trying to get a rear sway bar from Corksport.
+geofftentwo Glad to hear it! I recommend the DDM Works rear bar, but if you want an effortless install, I understand going with the CS bar. Happy modding!
Hey Buddy thanks for the video. I own a 2010 MAZDA 2 NEO in Melbourne Australia. I am very proud owner of this car. I don't care what anyone else thinks. Its a unique little zippy car. Huge MAZDASPEED fan. Definitely keeping my eyes out on your videos. Everyone looks at my car too. I just smile and like to show it off. Do you have a video of tinting headlight covers ?
Fair enough buddy. I just thought I would ask. Was cruising home today in my MAZDA 2. It Definitely has the power and grunt. No way am I going to sell my pocket rocket car. Its one of kind. Thank you MAZDA MAZDASPEED. For making cars that appeal to mainstream market of MAZDA lovers :)
You're probably not doing Mazda 2 stuff anymore, but I wanted to ask about your lowering springs. I wanted to know if the cars ride was ready stif, especially in the back or did it ride nice. I'm sking about the lowering springs, not the coil overs
I just ordered one of these and also picked up a roll of the vinyl from the craft store from your video. Is there enough vinyl in length and width in the roll to use the vinyl to do what you did in your duct tape accent video in length and width? And if so, should I wrap the vinyl before installation? Thanks. Your vids are awesome!
Don’t know if a 5 foot vinyl roll will reach all the way around the lip on its own, but you’ll definitely have enough if you cut it in half lengthwise. I personally would install the lip and then add the vinyl so it’s not flopping around.
Hi.... Nice video, I just got Mazda 2 RZ 2013 with odo only 60km, it has projie headlight, I feel that projie is not bright enough, do you have some suggestion, how to upgrade the projie headlight?
+Elizabeth Stein Unless you’re looking at it from eye level, probably not. I’ve gotta be on the ground to see the leading edge of the stock lip behind the eBay one.
Nice video, very informative. 👍
+Rage_Hardscope Thanks! ✌🏻
Your videos are great! You've got me excited again about my 2011 #2. Just ordered the front lip. Next is probably the motor mount. Trying to get a rear sway bar from Corksport.
+geofftentwo Good to hear. Im glad that you enjoy the channel. Thanks for watching!✌🏻
+geofftentwo Glad to hear it! I recommend the DDM Works rear bar, but if you want an effortless install, I understand going with the CS bar. Happy modding!
How did it look like share pictures have the same one 2011 #2
This is like a cross between Savagegeese and RCR. Hilariously fun!
That’s some good company. You’re far too kind! Haha
Thanks for watching! ✌🏻
For that kind of money looks awesome!
+pit32s Thanks! :D
Hey Buddy thanks for the video. I own a 2010 MAZDA 2 NEO in Melbourne Australia. I am very proud owner of this car. I don't care what anyone else thinks. Its a unique little zippy car. Huge MAZDASPEED fan.
Definitely keeping my eyes out on your videos. Everyone looks at my car too. I just smile and like to show it off.
Do you have a video of tinting headlight covers ?
Thanks! No, I don’t like the look of tinted lights and making the headlights darker is dangerous anyway.
Fair enough buddy. I just thought I would ask. Was cruising home today in my MAZDA 2. It Definitely has the power and grunt. No way am I going to sell my pocket rocket car. Its one of kind.
Thank you MAZDA MAZDASPEED. For making cars that appeal to mainstream market of MAZDA lovers :)
We nicknamed ours zippy.
What rims and tires are those ?
You're probably not doing Mazda 2 stuff anymore, but I wanted to ask about your lowering springs. I wanted to know if the cars ride was ready stif, especially in the back or did it ride nice. I'm sking about the lowering springs, not the coil overs
It was fine with lowering springs. 👍🏻 As long as the shocks are good it’s close to stock as far as ride quality.
En donde se puede conseguir el labio delantero y el faldón de abajo en las puertas
Where can I get the lip?,,,please replay
Maybe consider using clamps to assist with install?
+Rockit181 I don't own any clamps, but that might have helped.
Nice video bro very educational
What's the size of your Rims and tyres that you got on ur mazda
Thanks!
15x7 +30 with 205/50 tires 👍🏻
I just ordered one of these and also picked up a roll of the vinyl from the craft store from your video. Is there enough vinyl in length and width in the roll to use the vinyl to do what you did in your duct tape accent video in length and width? And if so, should I wrap the vinyl before installation? Thanks. Your vids are awesome!
Don’t know if a 5 foot vinyl roll will reach all the way around the lip on its own, but you’ll definitely have enough if you cut it in half lengthwise. I personally would install the lip and then add the vinyl so it’s not flopping around.
@@HiroshimaSpirit thanks!
Is there a video of the black and red lip? or how you detailed it? Thanks
It’s just orange duct tape. 👍🏻
I think I cover it in “How I Spent Memorial Day”.
the lip that is already install from the factory how did you remove it?
I didn’t. There’s no reason to.
Hi, the lip was put on a regular original bumper? Or you had a modified bumper and you installed it on it? Thanks
It’s the original bumper.
thanks a lot for the response ! Hopefully I will be a Mazda 2 owner in the coming months :D
I hope so! Thanks for watching! ✌🏻
Hi.... Nice video, I just got Mazda 2 RZ 2013 with odo only 60km, it has projie headlight, I feel that projie is not bright enough, do you have some suggestion, how to upgrade the projie headlight?
Better hardware is my best guess. I’ve never had projector headlights, so I can’t speak on what what makes them work best.
hey, what tires are you wearing? thnx
At the time this video was made, Nitto NeoGen. I now have Continental Extreme Contact Sport.
Hey boss..what size tires are you running on the silver Mazda 2?
Thx
205/50r15
@@HiroshimaSpirit just saw your mods video where you actually cover that..Thx Hoss
It is my most asked question. I’ve considered adding it to every video. Haha
How difficult was it to remove the stock lip? Do the rivets just pop out?
+Elizabeth Stein I just left mine because I didn’t want to deal with it. lol You can’t see it behind the aftermarket part.
My stock lip refuses to stay clipped together in the middle. Do you think that would make a difference?
+Elizabeth Stein Unless you’re looking at it from eye level, probably not. I’ve gotta be on the ground to see the leading edge of the stock lip behind the eBay one.
How did you get the side screws on by the tires? Did you take your tires off to do so?
Turn the steering wheel to angle them out of the way.
HiroshimaSpirit i feel so stupid for not thinking about that😂
Thank you so much i love the lip! Ill post picks tomorrow when the sun is out
I live in pothole City is it worth even putting a lip on
It depends on how low you are, I’d say. The lip is only $50, so if it ever broke it’s not like it’s the end of the world.
Will this front lip fit the DE series?
It’s on a DE in the video. You just need to have the post-facelift front bumper.
Looks so good!!
I cannot find one for my 3 door Mazda 2 2010 sport here in the UK :(
If anyone watching from the UK finds one let me know. Thanks
There’s a couple on eBay I’ve found but not sure how good they be
And MS Style Front Bumper Lip for mazda 2 2008?
It won’t fit a 2008, if that’s what you’re asking.
@@HiroshimaSpirit can you find for me Which one fits the 2008 model?
Is your Mazda 2 engine the same or similar as my 2016 scion IA which is a Mazda 2 sedan
Looks great
Two very different engines. Thanks!
Saw this on eBay. Do you think it will fit in a 2009 Mazda 2?
+Edward Hilvano Unless yours has the same front bumper as mine, no. It's specifically made for that bumper and is unlikely to fit others.
cool. Got facebook? I am already following you on instagram
+Edward Hilvano Just sent a request!
Nice video, I wish it was still $50. Now it’s $90 😭
is demio mazda and mazda 2 the same?
demio mazda from japan
They have different options in different places, but yes they are the same car.
thankyouuu
Can I still get this on ebay
Yes. Or from the manufacturer, Bayson R
@@HiroshimaSpirit thanks
Do this add to insurance for “modifications”
About as much as applying a sticker is a modification, so I doubt it. This doesn’t change anything mechanical or regarding safety.
Dude, ebay link? Other mazda2 owners want to help their poor derpy faced cars :)
+Matt P (Stronin) Search 'Mazda2 lip'. It's the first two results.
Inflation! $109.98
Do you know if someone selling front lip canada
The company swelling these lips will ship to Canada if you message them.
@@HiroshimaSpirit what is the name company ?
Bayson R Motorsports
@@HiroshimaSpirit went to there website there no canada
You have to message them directly. Talk to a person.
Too bad it’s now > $100 USD.