I first used a celette jig in 1972 as a wet behind the ears apprentice. This video shows how they are still the go to repair kit for major vehicle repair. Great work, keep it up.....
And would you mind explaining please to a novice, why all the beating, pulling, and pulling and beating, and in the end they always cut the damaged bit to replace it with a new one?
The procedure is defined in the repair manual that goes along with every repair. Before the damaged part can be cut it has to be pulled to roughly that position where it should be so that surrounding area also straightens, loses tensions and makes it easier to place the new part where it belongs. Im not a technician either and only take care of our TH-cam channel, but roughly this is the answer to your question.
@@Celette thank you ... you tube is great for advertising ... when i get ready to buy one i will contact you it is great to see how to use one . i have watched many of your videos
Guys, your video is all over the place. You need to stay focused and follow a simple step by step format... Show everything in stages from 1. Assessment of damage 2. Spare parts needed and to be replaced 3. Hooking up to frame machine 4. Plan your approach on which damage to tackle first and follow each one in order - example - Remove damaged part - Straighten, pull or align damages - Install new or raplacement part - align - adjust - weld - grind - fill - sand - primer 5. Do this for each replacement part 6. Your video should show this in this order 7. Have a good introduction 8. Show the work and timelapse the long work . 9. When the car is finished - Show before and after, one side at a time. 10. Show the finished work
Thank you for your advise. We will try to improve. Reality is that we sometimes shoot videos at our customers places and not always our staff has time to go and shoot all days long, that's why some parts are missing sometimes. Our main goal is to promote equipment that we manufacture. Nevertheless, its kind of you to advise us on how to do better and we will try to implement it in our future videos 🙏🏻🙏🏻🙏🏻
@@Celette Your work is excellent and you have all the tools, just get your videos edited the correct way and I will always support you and share your TH-cam Channel so that you may become the best. Also, follow Arthur Tussik and see how he does it.
@@Celette For a comparison. and yes, I did enjoy the video and generally always do.. Just seen Arthur repair some savagely damaged cars over the years I have followed metal shaping, crash repair and vehicle restoration. I'm and old bloke who is fascinated by these subjects.
@@Afrodizyak47 Glad you are enjoying our videos, we also agree that Arthur is a very skilled craftsman, him following all the OEM procedures is another topic
Hi there, someone likes the music and someone doesn't. Please check some of our other videos, usually we keep the original sound. This video is a repost from Russia where creators decided to add music. Have a nice day!
Почему если восстанавливают русские то сразу колхоз, ни каких тебе измерительных систем ( mz и прочих) а только рулетка и механическая линейка!!! Делают в какой-то ж...пе, тьма, да, и зачем вы швы шпаклюете алюминевой шпаклей???
I first used a celette jig in 1972 as a wet behind the ears apprentice. This video shows how they are still the go to repair kit for major vehicle repair. Great work, keep it up.....
Thank you Andy! Nice to receive a comment from people like you! We hope you will keep enjoying watching our videos. Have a nice day!
And would you mind explaining please to a novice, why all the beating, pulling, and pulling and beating, and in the end they always cut the damaged bit to replace it with a new one?
The procedure is defined in the repair manual that goes along with every repair. Before the damaged part can be cut it has to be pulled to roughly that position where it should be so that surrounding area also straightens, loses tensions and makes it easier to place the new part where it belongs. Im not a technician either and only take care of our TH-cam channel, but roughly this is the answer to your question.
Serious bodyshop with right équipement
with the best equipment
D
@@roby8173 👍
EXTRAORDINARY WORK.....2 👍's UP !!!!!!
Thx Chapul
@@khalidarlo1064 very interesting
@@sergioharvey4821 Thank you for sharing this important information for our industry
Nice
Thx Delphine
Ragazzi... siete bravissimi.👏👏👏
Thx Andrea
Das beste für die Besten
🙏
Nice.
Thx Anne
These techs do an incredible job restoring the beauty of this Porsche, and Celette equipment is the perfect compliment!
Yes, right tools in good hands make things happen. Thank you for following, Jon!
nice
Thx Piet
very nice movie. keep'em coming
Thx Andrei, glad you liked it
Did anyone notice those tube stands the car was on before transferred to the Celette system? Scary deal
🙂
Bom dia eu curto tudo seu trabalho eu sou do Rio de Janeiro é um celent trabalho eu gosto muito
Olá, muito obrigado por esta amável mensagem e por assistir nossos vídeos! Esperamos que você tenha um ótimo fim de semana!
nice video...but with the natural sounds and no music would make them much better
Thank you for your opinion. We wish you a nice day!
@@Celette
I WANT TO BUY ONE OF THESE FOR MY RESTORATION garage .. i have been looking at prices ... great product
If you share with us your contact details our local representative will contact you
@@Celette thank you ... you tube is great for advertising ... when i get ready to buy one i will contact you it is great to see how to use one . i have watched many of your videos
Thank you! You are always welcome to contact us! Have a nice day!
The wheel stands are cool
🙏
i dont see any of these parts welded just screwed in or did they edit those parts out?
very possible
They weld from 34:00 to 41:00.
@@Patrick-is4ym yes i commented that at the beginning of the video, watched the whole thing thanks
👍👍👍
👍👍👍👍
Это где восстанавливают ??? в Польше ??
Это в россии
Guys, your video is all over the place. You need to stay focused and follow a simple step by step format... Show everything in stages from 1. Assessment of damage 2. Spare parts needed and to be replaced 3. Hooking up to frame machine 4. Plan your approach on which damage to tackle first and follow each one in order - example - Remove damaged part - Straighten, pull or align damages - Install new or raplacement part - align - adjust - weld - grind - fill - sand - primer 5. Do this for each replacement part 6. Your video should show this in this order 7. Have a good introduction 8. Show the work and timelapse the long work . 9. When the car is finished - Show before and after, one side at a time. 10. Show the finished work
Thank you for your advise. We will try to improve. Reality is that we sometimes shoot videos at our customers places and not always our staff has time to go and shoot all days long, that's why some parts are missing sometimes. Our main goal is to promote equipment that we manufacture. Nevertheless, its kind of you to advise us on how to do better and we will try to implement it in our future videos 🙏🏻🙏🏻🙏🏻
@@Celette Your work is excellent and you have all the tools, just get your videos edited the correct way and I will always support you and share your TH-cam Channel so that you may become the best. Also, follow Arthur Tussik and see how he does it.
Не столько важно на каком стапеле делается и какой марки, а важно чтобы руки росли из нужного места и чтобы голова работала хорошо.
👍
Should have sent it to Arthur Tussik
For what reason ?
@@Celette For a comparison. and yes, I did enjoy the video and generally always do.. Just seen Arthur repair some savagely damaged cars over the years I have followed metal shaping, crash repair and vehicle restoration. I'm and old bloke who is fascinated by these subjects.
@@Afrodizyak47 Glad you are enjoying our videos, we also agree that Arthur is a very skilled craftsman, him following all the OEM procedures is another topic
@@Celette Thank you for your response. I certainly never meant any disrespect.
@@Afrodizyak47 We didn't think you did, was just wondering why you would send it to him
c'est un massacre c'est pas de la tolerie c'est de la demolition bonjour la solidité de la structure de la caisse c'est bon pour la casse
🥸
the music its like you dont want us to watch it
Hi there, someone likes the music and someone doesn't. Please check some of our other videos, usually we keep the original sound. This video is a repost from Russia where creators decided to add music. Have a nice day!
They use welding helmets weird.
Thank you for your opinion
I wouldn't get on this car
i wouldn't get on any car
Какой ужас ! Групповой половой акт
🤓
фантазёры старое на новое поменяли в фаре свет вы тоже восстанавливаете заменой лампочек
👍
🤦🤦
🙏
Почему если восстанавливают русские то сразу колхоз, ни каких тебе измерительных систем ( mz и прочих) а только рулетка и механическая линейка!!!
Делают в какой-то ж...пе, тьма, да, и зачем вы швы шпаклюете алюминевой шпаклей???
because they can
Ridículo
Tranquilo amigo! La vida es bella, trata de disfrutarla.
👍👍👍
🙏🙏🙏